Wiltshire · England
Bath Re-enamelling for Chittoe homes
Local bath re-enamelling for Chittoe: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Several chips and rust patches
About our bath re-enamelling in Chittoe
The bath stays where it is, so your taps, tiles and plumbing are left alone. It typically takes one visit, and can be used again the following day. Typical jobs include enamel that’s lost its shine and feels rough and brown or grey marks that don’t clean off, on pressed steel baths, acrylic baths and Victorian roll-tops.
You’re covered for a year from the day of the repair. Just call us if there’s a problem and we’ll sort it.
- Area
- Chittoe (SN15)
- County
- Wiltshire
- Cover
- A year, on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Repair or replace: which is better?
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. What it costs depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed price from your photos, so you know the cost before booking.
Why book with us
- A fixed quote before booking
- Usually one visit, start to finish
- No extra charge for your area
- Accredited with CHAS, Constructionline and SafeContractor
See our prices page and bath cost comparison.
Our work in Chittoe
Chittoe is about 3 miles north-east of Melksham, in Wiltshire. Jobs in Chittoe are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. Our technicians cover 425 places in Wiltshire, from the larger towns to small villages. We work right across the region, from Chittoe to Birmingham (about 74 miles away).
Jobs in SN15 are booked in the same way as anywhere else. Other places close to Chittoe include Westbrook (1 mile south), Chittoe Heath (1 mile east), Bromham (1 mile south-east), Sells Green (3 miles south) and Heddington (3 miles east). Larger places within reach include Trowbridge (8 miles south-west), Chippenham (5 miles north-west), Calne (4 miles north-east), Devizes (5 miles south-east), Westbury (11 miles south-west) and Melksham (3 miles south-west).
Local landmarks in Chittoe
Typical jobs here are in homes near St Nicholas Church of England VC Primary School and Church of St Nicholas. The closest station to Chittoe is Melksham station, about 3.6 miles west of the centre. Well-known places in the area include Melksham Community Hospital (3.5 miles south-west) and Shane's Castle (4.1 miles south-east). Green spaces nearby include King's Play Hill.
Landlords, agents and businesses in Chittoe
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
If you manage property in Chittoe, we’ll quote for several properties at once. Send pictures for each one and we will come back with a combined price.
What a repair cannot fix
Some jobs aren’t right for a repair, including:
- Holes rusted through the metal
- An acrylic bath that flexes badly underfoot
- Problems we can’t see until an old finish comes off
Send us photos and we’ll tell you honestly before booking.
Materials we repair
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
Do you need bath re-enamelling in Chittoe?
A dull surface stains and holds dirt, and cleaning harder only makes it worse. That is the point where re-enamelling makes sense.
Typical reasons for a call-out include:
- Stains that will not shift
- An old resurfacing that is failing
- A bath in a colour that no longer suits
- Wear marks under the taps
Questions to ask before booking
- What the guarantee covers, and for how long
- Is the price fixed, and does it include VAT?
- If travel is included in the price
- How the room is protected while they work
Aftercare tips
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Dry the bath after use to stop limescale
- Have chips seen to early
- Never use suction bath mats
- Stick to gentle, non-abrasive cleaners
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
How the visit works
Your technician turns up when we said we would, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. The work itself takes most of the day, and the room is left clean and tidy.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Mention if the room is upstairs or in a flat
- Keep pets and children out of the room while we work
- Avoid using the area for a few hours before we arrive
Getting a price
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Advice
FAQs for Chittoe
Is repairing better than replacing?
Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you fix a peeling bath coating?
Normally, yes. We strip the failing coating and resurface it properly. Mention it when you send photos.
Is there any odour?
A little, depending on the job. Open windows and an extractor fan help.
Do you do work for letting agents?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before booking.
Do you work in Chittoe?
Yes, we do. We send a technician to Chittoe for every job, with no extra charge for travel.
Also near Chittoe
What else we do in Chittoe
Materials and what they mean for the repair
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
About our accreditations · Every repair comes with a one-year guarantee.
