Wiltshire · England
Bath re-enamelling & resurfacing in Westbrook, Wiltshire
Bath re-enamelling in Westbrook without the cost of replacing. Get a fixed quote from your photos, then we come to you.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- Thin, worn enamel in places
Bath re-enamelling at your home in Westbrook
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Nothing is disconnected or removed. We’re often asked to fix a peeling or bubbling previous coating and a bath that stays dull however much you clean it, on pressed steel baths, cast iron baths and Victorian roll-tops.
You’re covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Where
- Westbrook (SN15)
- Region
- Wiltshire
- Warranty
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
Towns and villages near Westbrook
More services for Westbrook
What a repair cannot fix
Some problems need a builder, plumber or fitter rather than us:
- Anything hidden under an old coating, until we remove it
- Leaking taps or wastes (a plumber’s job)
- A cast iron or steel bath that’s cracked right through
If in doubt, send pictures and we’ll say what we think.
What we work on
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
Our work in Westbrook
Westbrook is about 3 miles north-east of Melksham, in Wiltshire. Whether you’re in the middle of Westbrook or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. We cover all 425 towns and villages in Wiltshire. Our jobs stretch from Westbrook to Birmingham (75 miles away).
Here we cover the SN15 postcode area. We also travel to Chittoe (1 mile north), Bromham (1 mile east), Chittoe Heath (1 mile north-east), Sells Green (2 miles south) and Martinslade (2 miles south). Larger places within reach include Trowbridge (8 miles south-west), Chippenham (5 miles north-west), Calne (4 miles north-east), Devizes (4 miles south-east), Westbury (10 miles south-west) and Melksham (3 miles south-west).
Near you in Westbrook
Typical jobs here are in homes near Church of St Nicholas and St Nicholas Church of England VC Primary School, among other places. For rail, the closest station is Melksham station, about 3.5 miles west of the centre. Nearby you’ll also find Melksham Community Hospital (3.3 miles south-west) and Spye Park Stables Museum (0.9 miles north). The countryside around Westbrook includes King's Play Hill.
How we price bath re-enamelling
Resurfacing from £350. We give every job a fixed quote from pictures. This is what makes a difference:
- The type of damage
- The colour and finish to match
- What the surface is made of
- How much damage there is
We charge the same wherever you are, with no extra for Westbrook. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Quotes from your photos
Almost every job we do is priced from pictures. This is what to send:
- What it’s made of, if you know
- A close-up of the damage, in focus
- Where you are, by postcode
- Daylight if possible, and no flash reflection
Most customers in Westbrook get their price from pictures. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Westbrook: your questions answered
Will the new finish last?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Is there any odour?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
Does re-enamelling smell?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Can you redo someone else’s repair?
Yes, regularly. It can add a little time, which we include in the quote.
Can you quote from pictures?
Usually, yes. Clear pictures let us give you a fixed price without visiting.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Can you do the outside of a roll-top?
Yes, often. We resurface the inside, and the outside can be refinished too.
Do you need bath re-enamelling in Westbrook?
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Get in touch if you’ve noticed:
- A period or roll-top bath worth keeping
- A bath that stays dull however much you clean it
- Wear marks under the taps
- A peeling or bubbling previous coating
What to look for in a quote
- A fixed price, and whether VAT is included
- Whether cleaning and preparation are in the price
- Who turns up on the day
- What happens if they find more damage
Aftercare tips
Good habits make a big difference to how long a repair lasts:
- Don’t leave a chip unrepaired
- Don’t use the bath until it has fully cured
- Do not let dyes or oils sit on the finish
- Don’t leave bottles, razors or sponges standing on the surface
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Fix dripping taps quickly.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
What happens on the day
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which normally takes most of the day. If anything looks different from your photos, we’ll talk to you before going ahead.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Make sure the room can be ventilated
- Let us know if it has been repaired before
- Keep pets and children out of the room while we work
Get a quote
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Advice
Different materials, different repairs
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we pay close attention there.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Repairing versus replacing in Westbrook
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Our bath re-enamelling starts from £350. We don’t add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why Westbrook customers choose us
- We will tell you if it’s not worth repairing
- No need to remove anything
- Repair technicians who travel to you, UK-wide
- A year’s guarantee on all work
See our full price list and guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
