Walsall · England
Bath re-enamelling & resurfacing in Chuckery, Walsall
Full bath re-enamelling and resurfacing in Chuckery, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A coating lifting around the plughole
- Thin, worn enamel in places
What bath re-enamelling costs
Prices start from £350. We price every job individually, from your photos. What matters most is:
- How many areas need work
- Where the damage is and how we get to it
- The material and finish
- The type of damage
Set against the cost of replacement, repairing typically costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
Send photos for a quote
It only takes a minute to photograph the damage. Please include:
- One picture of the entire bath
- Good light, ideally daylight, without flash glare
- What it’s made of, if you know
- Details of any past repairs
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.
Bath re-enamelling at your home in Chuckery
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. If you are dealing with thin, worn enamel in places and a period or roll-top bath worth keeping, we can help, whatever the material.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Location
- Chuckery (WS1, WS4, WS5)
- Area hub
- Walsall
- Warranty
- 12 months on all our work
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Aftercare tips
It’s all simple stuff:
- Do not let dyes or oils sit on the finish
- Do not leave a chip unrepaired
- Avoid suction-cup mats
- Clean with a soft cloth and mild detergent
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Honest limits
A few problems are outside what a surface repair can do:
- Acrylic that moves when you stand in it
- Problems we cannot see until an old finish comes off
- Plumbing leaks, which need a plumber
Not sure? Send pictures and we will give you a straight answer.
What we work on
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
What your bath is made of matters
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Work for landlords and builders
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we will arrange it.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Chuckery and nearby
Chuckery is about 1 mile north-east of Walsall, in Walsall. From the centre of Chuckery to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in all 39 towns and villages across Walsall. Our jobs stretch from Chuckery to Birmingham (8 miles away).
All of WS1, WS4 and WS5 is within our area, from the main roads to the quietest streets. That includes homes on Bott Lane, Lumley Road and Orwell Road. With the A461 close by, Chuckery is easy for our repair technicians to reach. Close by, we cover Walsall (1 mile south-west), Highgate (1 mile south-west), Caldmore (1 mile south-west), Daisy Bank (1 mile east) and Park Hall (1 mile south-east). Further out, we also cover Willenhall (3 miles west), Bloxwich (3 miles north-west), Brownhills (4 miles north), Aldridge (3 miles north-east), Pelsall (3 miles north) and Turnberry Estate (4 miles north-west).
Near you in Chuckery
Locally, our jobs take us to homes close to Walsall Arboretum, Hydesville Tower School and St Luke. Other local landmarks include Chuckery Primary School (less than half a mile west), Dog and Partridge pub (0.6 miles south-west) and Queen Mary's Grammar School (within half a mile south). Chuckery’s nearest station is Walsall station, about 0.8 miles west. Well-known places in the area include Jerome K Jerome Birthplace Museum (0.7 miles west) and Walsall Castle (1.4 miles west). Not far away are Pouk Hill and Forge Mill Lake.
How the visit works
We work cleanly and quietly. We protect the area first, then the job itself takes the best part of a day. Before we leave, we explain how soon it can be used and how to care for it.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Keep pets and children out of the room while we work
- Point us to the nearest place to park
- Let us know which floor the room is on
Get a quote
Email us photos of the damage and a wider shot of the entire item, and tell us you’re in Chuckery, and we will reply with a fixed price.
Advice
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Towns and villages near Chuckery
What else we do in Chuckery
Should you replace it?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Prices start from £350. A repair usually costs much less than people expect, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
Why choose Surface Doctor in Chuckery
- Generally one visit, start to finish
- Same prices wherever you are
- Straight answers about what a repair can do
- Work done at your home or business
Take a look at our prices page or bath cost comparison.
Chuckery questions
How long will the bath be out of use?
Most baths are done in a day, ready the day after. We give you timings with the quote.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Does re-enamelling smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.
Do you cover the whole of Walsall?
We cover the whole UK, including Chuckery and the rest of Walsall. Just include your postcode and we’ll confirm dates.
Can you re-enamel a roll-top bath?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the pictures can’t show what we need.
Do you cover Chuckery?
Yes, we do. We send a technician to Chuckery for every job, and the price is the same as everywhere else.
About our accreditations · Every repair comes with a one-year guarantee.
