Walsall · England

Bath re-enamelling & resurfacing in The Delves, Walsall

Bath re-enamelling in The Delves without the cost of replacing. Get a fixed quote from your photos, then book a visit.

  • Resurfacing from £350
  • An original cast iron bath that needs restoring
  • An old resurfacing that’s failing
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in The Delves

Bath re-enamelling in The Delves, done in place

Most baths are re-enamelled in a day, and you can use the bath the day after. Nothing is disconnected or removed. Our repair technicians work on Victorian roll-tops, pressed steel baths and acrylic baths, and common reasons people contact us are thin, worn enamel in places and brown or grey marks that don’t clean off.

You’re covered after we leave: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.

Basin with yellowed glaze resurfaced to a clean white finish
Where
The Delves (WS5, WS1, WS10)
Area hub
Walsall
Guarantee
One year on every repair
Quotes
From £350. Free, fixed price from pictures
Telephone
0345 017 0787
Page updated
23 October 2026

When we would advise against a repair

Some jobs are not right for a repair, including:

  • Problems we cannot see until an old finish comes off
  • A bath that is rusted through
  • Acrylic that moves when you stand in it

Not sure? Send pictures and we will give you a straight answer before booking.

What we work on

  • Basins & shower trays
  • Pressed steel baths
  • Cast iron baths
  • Victorian roll-tops
  • Acrylic baths

Signs you need bath re-enamelling in The Delves

The gloss on enamel is thin, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.

It’s worth getting a quote if you see:

  • Lots of chips and rust spots
  • Wear marks under the taps
  • A coloured bath you want in white
  • A peeling or bubbling previous coating

What to look for in a quote

  • How to look after the finish
  • How changes to the job are handled
  • When it can be used again
  • If travel is included in the price

10 questions to ask before you book

What happens on the day

Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, and get on with the job, which usually takes most of the day. If we find something your pictures didn’t show, we will explain it before carrying on.

  1. We check the bath and agree the finish with you.
  2. Taps, tiles and the floor are masked off.
  3. The bath is degreased, repaired and keyed.
  4. We apply the primer and then the finish coats.
  5. We remove the masking, tidy up and give you the curing time.

How to prepare

  • Tell us about any previous repairs or coatings
  • Mention if the room is upstairs or in a flat
  • Move bottles, mats and clutter away from the area

Getting a price

There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.

Send photos for a quote

Related advice

Different materials, different repairs

Pressed steel

Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we check it carefully.

Roll-top and period baths

Freestanding roll-tops can be done inside and out, with the outside refinished as well.

Work for landlords and builders

Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

Should I try a DIY kit first?

If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.

If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.

Covering The Delves

The Delves is about 1 mile south of Walsall, in Walsall. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover all 39 towns and villages across Walsall, from the larger towns to small villages. Our jobs stretch from The Delves to Birmingham (about 7 miles away).

Here we cover the WS5, WS1 and WS10 postcode area. Jobs here include addresses on Bell Lane, Sandy Lane and Rowan Road. Main roads around The Delves include the A4031, which makes travel easy. We also travel to Yew Tree (1 mile south-east), Bescot (1 mile west), Highgate (1 mile north), Caldmore (1 mile north-west) and Palfrey (1 mile north-west). Further out, we also cover Willenhall (4 miles north-west), Bloxwich (4 miles north), Brownhills (6 miles north), Aldridge (4 miles north-east), Pelsall (5 miles north) and Blakenall Heath (4 miles north).

Local landmarks in The Delves

We visit homes around Blue Coat Church of England Academy, Walsall Arboretum and Delves Junior School, among other places. You’ll also find The White Lion pub (0.8 miles north), St Gabriel's Church (under half a mile north-west) and Joseph Leckie Academy (under half a mile west). The closest station to The Delves is Bescot Stadium station, about 0.8 miles west of the centre. Nearby you will also find Walsall Manor Hospital (1.7 miles north-west) and Jerome K Jerome Birthplace Museum (1.4 miles north). Not far away are Gorse Farm Wood and Forge Mill Lake.

Map of The Delves © OpenStreetMap contributors

Common questions in The Delves

I’m a tenant. Can you help?

We can work for tenants, landlords or agents. Just ensure the landlord agrees.

Do I have to be there?

We need someone to let us in. After that, you can carry on with your day.

Can you do the outside of a roll-top?

Yes. Inside and out if you’d like.

Can you repair several things at once?

Of course, and it normally saves money. Send pictures of everything together and we’ll quote them together.

How much does bath re-enamelling cost in The Delves?

Resurfacing from £350. We give a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.

Do you come to The Delves?

Yes. We work across the UK and travel to The Delves and the rest of Walsall. Send us pictures for a fixed quote, or call 0345 017 0787.

Can I get a quote without a visit?

Normally, yes. A close-up and a wider photo are enough to give a fixed price.

Is my repair covered?

Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.

Repair or replace in The Delves?

A replacement frequently means several trades over several days. Resurfacing takes one technician and generally a day, and the bath is usable the day after. Resurfacing from £350, with every job priced individually. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.

Why book with us

  • Same prices wherever you are
  • No need to remove anything
  • Dust sheets down, tidy finish
  • Accredited with CHAS, Constructionline and SafeContractor

See our full price list or bath cost comparison.

Prices and what affects them

Resurfacing from £350. You won’t pay by the hour. The price depends on:

  • The type of damage
  • Where the damage is and how we get to it
  • Unusual colours or finishes
  • How many items we do on one visit

A repair normally costs much less than people expect, especially compared with replacing and refitting. Send photos and we will give you the exact figure.

Send pictures for a quote

Almost every job we do is priced from pictures. This is what to send:

  • A coin or ruler next to the damage for scale
  • One picture of the entire bath
  • A close-up of the damage, in focus
  • What it’s made of, if you know

A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them to us. You’ll get a fixed price, not an estimate.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.