Walsall · England
Bath re-enamelling & resurfacing in Caldmore, Walsall
Full bath re-enamelling and resurfacing for homes and businesses in Caldmore and across Walsall. Free, fixed quotes from your photos.
- Resurfacing from £350
- Stains that won’t shift
- An old resurfacing that is failing
Bath re-enamelling in Caldmore, done in place
We don’t move the bath, so your taps, tiles and plumbing are left alone. It generally takes one visit, and can be used again the following day. We regularly repair basins & shower trays, cast iron baths and Victorian roll-tops, and common reasons people contact us are a coating lifting around the plughole and a dull, rough surface that won’t come clean.
You are covered for a year from the day of the repair. Just call us if there is a problem and we will sort it.
- Area
- Caldmore (WS1, WS2, WS5)
- Region
- Walsall
- Warranty
- 12 months on all our work
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
For landlords and businesses
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Housing associations and facilities teams use us for planned and reactive repairs in Walsall and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
Caldmore and nearby
Caldmore is about 1 mile south-west of Walsall, in Walsall. Clients in Caldmore get the same service as everywhere else we cover: a fixed quote from your photos, and a technician at your door on the day. Our technicians cover all 39 towns and villages across Walsall. You can also see our page for Birmingham, about 8 miles away.
Our technicians cover all of WS1, WS2 and WS5. Jobs here include addresses on Bath Road, Love Lane and Hawes Road and the roads around them. Other places close to Caldmore include Highgate (1 mile east), Walsall (1 mile north-east), Palfrey (1 mile south-west), Bescot (1 mile south-west) and Chuckery (1 mile north-east). Further out, we also cover Willenhall (3 miles north-west), Bloxwich (3 miles north), Brownhills (5 miles north-east), Aldridge (3 miles north-east), Pelsall (4 miles north) and Blakenall Heath (3 miles north). Being one of Walsall’s larger places, Caldmore is somewhere we visit often.
Local landmarks in Caldmore
Our clients here include homes close to Church of St Michael and All Angels, Blue Coat Church of England Academy and The White Lion pub and the streets around them. You’ll also find Blue Coat Church of England Academy (within half a mile north-east), Caldmore Primary Academy (under half a mile east) and Walsall Arboretum (1 mile north-east). Caldmore’s nearest station is Walsall station, roughly 0.5 miles north of the centre. Well-known places in the area include Walsall Manor Hospital (0.8 miles north-west) and Jerome K Jerome Birthplace Museum (less than half a mile north). The countryside around Caldmore includes Forge Mill Lake and Pouk Hill.
Other services in Caldmore
How to care for the repair
Much of the damage we repair could have been avoided. These habits help:
- Fix dripping taps quickly
- Don’t leave a chip unrepaired
- Don’t use the bath until it has fully cured
- Use washing-up liquid and a soft cloth
Wipe the bath dry after use where you can, especially in hard water areas, and rinse off any bath products.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
How we price bath re-enamelling
Resurfacing from £350. Quotes are free and the price is fixed. What we look at:
- The type of damage
- The material and finish
- How much damage there is
- Doing more than one item at once
A repair generally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
How to get a fixed price
Almost every job we do is priced from pictures. This is what we need:
- Something in shot to show the size
- One picture of the entire bath
- Whether it’s been repaired or coated before
- The postcode, so we can plan the visit
Send us pictures of the damage and one of the entire item, with your WS1 postcode, and we will come back with a fixed quote.
Honest limits
A few problems are outside what a surface repair can do:
- Leaks from fittings rather than the bath
- A cast iron or steel bath that’s cracked right through
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send pictures and we’ll say what we think before you book.
Surfaces we repair
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
How it works
We agree an arrival time beforehand, so you’re not left guessing. Once we are there, the work takes the best part of a day for most jobs. We leave the room clean and you’ll know when it can be used.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Getting ready for the visit
- Keep children and pets away from the room on the day
- Let us know which floor the room is on
- Ensure the room can be ventilated
Getting a price
To get a price, send two or three pictures through our quote form or ring us. We’ll say immediately if a repair is the right fix.
Advice
Repair or replace: which is better?
A replacement often means several trades over several days. Resurfacing takes one technician and usually a day, with the bath back in use the day after. Prices start from £350. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
Why us?
- One-year guarantee on every repair
- Accredited with CHAS, Constructionline and SafeContractor
- We leave the room as we found it
- Work done at your home or business
See our pricing or guide to resurfacing and replacement costs.
Questions from Caldmore
Are there extra charges for Caldmore?
Travel is included in the price, and we charge the same wherever you are.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
Do you need to take the bath out?
Not at all. We work on the bath in place, with the room protected and ventilated.
Do you cover Caldmore?
Yes, we do. We send a technician to Caldmore for every job, with no extra charge for travel.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
Can you quote from pictures?
In nearly every case. We only ask to see it in person if the photos cannot show what we need.
What happens after I send pictures?
We come back with a fixed price, normally with dates to choose from. There is no obligation to book.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
About our accreditations · Every repair comes with a one-year guarantee.
