Derbyshire · England
Bath Re-enamelling in Church Broughton
Bath re-enamelling across Church Broughton and nearby, usually in one visit and guaranteed for a year.
- Resurfacing from £350
- Staining under the taps and around the waste
- A period or roll-top bath worth keeping
Bath re-enamelling in Church Broughton without replacing anything
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Our repair technicians work on cast iron baths, basins & shower trays and pressed steel baths, and the jobs we see most are a period or roll-top bath worth keeping and a coating lifting around the plughole.
All our work is covered by our one-year guarantee, wherever you are in Derbyshire.
- Area
- Church Broughton (DE65)
- Region
- Derbyshire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
When to call us in Church Broughton
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, starting where water runs and sits.
Signs it’s time to call us include:
- A roll-top that’s seen better days
- A bath that stays dull however much you clean it
- Thin, worn enamel in places
- A coloured bath you want in white
Questions to ask before you book
- What happens if the damage is worse than the photos show
- How long the guarantee is and what it covers
- When it can be used again
- What aftercare is recommended
Nearby places to Church Broughton
Other services in Church Broughton
Landlord and trade work in Church Broughton
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we’ll handle the rest.
We work for landlords, letting agents and housing providers in Church Broughton as well as homeowners. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
What your bath is made of matters
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
Aftercare tips
Aftercare is simple, and it makes a real difference:
- Get any chip repaired quickly
- A quick wipe after use keeps limescale away
- Clean with a soft cloth and mild detergent
- Do not use the bath until it has fully cured
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Church Broughton and nearby
Church Broughton is about 7 miles north of Burton upon Trent, in Derbyshire. Whether you’re in the middle of Church Broughton or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover 532 places across Derbyshire, from the larger towns to small villages. Our jobs stretch from Church Broughton to Birmingham (about 31 miles away).
Here we cover the DE65 postcode area. We regularly work on streets such as Main Street, Church Road and Meadow Rise. Other places close to Church Broughton include Hatton Fields (2 miles south-east), Hatton (2 miles south), Burntheath (3 miles south-east), Marston on Dove (3 miles south-east) and Tutbury (3 miles south). We also work in nearby towns such as Swadlincote (10 miles south-east), Belper (13 miles north-east), Ashbourne (8 miles north), Woodville (11 miles south-east), Upper Midway (10 miles south-east) and Midway (10 miles south-east).
Landmarks near Church Broughton
In Church Broughton, that means homes near Church Broughton CofE Primary School and St Michael and All Angels' Church. For rail, the closest station is Tutbury & Hatton station, roughly 2.5 miles south of the centre. Further afield, we also cover the area around Etwall Hospital (4 miles east) and Tutbury Castle (2.8 miles south).
Should I try a DIY kit first?
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
Church Broughton: your questions answered
Does the bath have to be removed?
No. We resurface it in place, so nothing else is disturbed.
Is it safe with children and pets around?
Just keep them out of the work area. We will let you know when it’s safe to use again.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do you cover the entire of Derbyshire?
Everywhere in the UK, Church Broughton included. Travel is included in the price.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Will there be a smell?
Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.
When can you do it?
We will give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Does re-enamelling smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
What we can’t put right
We will not take on work that won’t last, so these are the limits:
- Holes rusted through the metal
- Acrylic that moves when you stand in it
- A cast iron or steel bath that’s cracked right through
Send us pictures and we’ll tell you honestly before you book.
Materials we work on in Church Broughton
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
Repairing versus replacing in Church Broughton
A replacement frequently means several trades over several days. Re-enamelling is one technician, typically one day, and the bath is usable the day after. Prices start from £350. Set against the cost of replacement, repairing normally costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
What you get with us
- We come to you, anywhere in the UK
- CHAS and Constructionline accredited
- Same prices wherever you are
- We will tell you if it’s not worth repairing
Read our prices page and guide to resurfacing and replacement costs.
The process
We begin by going over the job with you. Next, we cover and mask everything nearby and we start. You can expect it to take the best part of a day, and we will keep you posted as we go.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s normally ready the next day.
Before we arrive
- Move bottles, mats and clutter away from the area
- Keep children and pets away from the room on the day
- Tell us about any previous repairs or coatings
Getting a price
We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
