Powys · Wales
Bath re-enamelling & resurfacing in Cilmery, Powys
Full bath re-enamelling and resurfacing in Cilmery, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Thin, worn enamel in places
- Stains that will not shift
How to look after the repair
How the surface is treated afterwards matters:
- Dry the bath after use to stop limescale
- Leave the bath for the full curing time before using it
- Use washing-up liquid and a soft cloth
- Have chips seen to early
Dry the bath after use if possible, particularly with hard water, and rinse away any product left on the surface.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Bath re-enamelling in Cilmery without replacing anything
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, so we do not cut corners on it. Our repair technicians work on acrylic baths, pressed steel baths and cast iron baths, and the jobs we see most are a dull, rough surface that won’t come clean and a roll-top that’s seen better days.
A one-year guarantee comes as standard, so you’re not left on your own once we have gone.
- Area
- Cilmery (LD2)
- County
- Powys
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Covering Cilmery
Cilmery (Welsh: Cilmeri) is about 26 miles south of Y Drenewydd, in Powys. Jobs in Cilmery are booked in like any other job: a fixed price from your photos, then a visit to do the work. Cilmery is one of 234 places in Powys we cover. We work right across the region, from Cilmery to Birmingham (about 70 miles away).
All of LD2 is covered. Whether you live on Maeshendre, Cae Llewelyn and Cefn Llewelyn or a nearby road, we can come to you. We also travel to Powys (2 miles north), Llanfair-ym-Muallt (2 miles east), Llanelwedd (3 miles east), Garth (4 miles west) and Y Bontnewydd-ar-Wy (4 miles north). Further out, we also cover Brecon (14 miles south), Llandrindod Wells (7 miles north-east), Llanfaes (15 miles south), Rhayader (11 miles north), Talgarth (14 miles south-east) and Pendre (14 miles south).
What’s near Cilmery
Typical jobs here are in homes near Prince Llewelyn Inn and Church of St David or St Llyr, among other places. There’s a railway station in Cilmery itself: Cilmeri station. Further afield, we also cover the area around Builth Wells Hospital (2 miles east) and Nant y Baedd Mound (1.4 miles north-west). The countryside around Cilmery includes Cwmbach Llechrhyd Lake and Pen-y-banc.
Why repair rather than replace?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Nothing else is disturbed. Our bath re-enamelling starts from £350. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.
What you get with us
- We come to you, anywhere in the UK
- Accredited with CHAS, Constructionline and SafeContractor
- Honest advice, even when it means no job
- Normally one visit, start to finish
See our full price list or guide to resurfacing and replacement costs.
What affects the price in Cilmery
Resurfacing from £350. Each job gets its own fixed quote. These are the things that affect it:
- Access to the area
- The colour and finish to match
- Any earlier repairs that need removing first
- How many areas need work
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
How to get a fixed quote
Two or three clear pictures are generally enough. It helps if you send:
- Daylight if possible, and no flash reflection
- A photo taken from further back
- Your postcode, so we can check dates
- Whether it’s been repaired or coated before
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and we will reply with a fixed quote. There is no charge for the quote and no obligation.
Different materials, different repairs
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
Landlord and trade work in Cilmery
We regularly work with letting and managing agents. Just send pictures, the address and how to get access.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
Your questions about bath re-enamelling in Cilmery
Do you cover Cilmery?
Yes, we do. Repair technicians travel to Cilmery from across the region, and the price is the same as everywhere else.
Can you redo someone else’s repair?
Typically, yes. We remove the old repair before doing a new one.
When can you do it?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Is a repair better than a new one?
Generally, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Will the bath be moved?
No. We resurface it in place, so the tiles and taps stay put.
Is there a call-out fee?
There’s no separate call-out charge. The fixed price covers the visit and the work.
Is there any odour?
Some materials have a smell while they’re applied, which is why we ventilate. It clears as the materials cure.
Can you change the colour of my bath?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
What we cannot put right
We will always be straight with you, so here’s what a repair can’t fix:
- An acrylic bath that flexes badly underfoot
- Anything hidden under an old coating, until we remove it
- Leaking taps or wastes (a plumber’s job)
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
What happens on the day
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job typically takes the best part of a day. We tidy up before we leave and let you know when you can use it again.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the next day, the bath is ready.
Before we arrive
- Tell us about parking, stairs or access
- Keep pets and children out of the room while we work
- Let the surface dry out before the visit
How to get a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Advice
Places near Cilmery
Also in Cilmery
About our accreditations · Every repair comes with a one-year guarantee.
