Gloucestershire · England
Bath re-enamelling & resurfacing in Coates, Gloucestershire
Damaged bath in Coates? We repair it in place, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- A coating lifting around the plughole
- Chips and rust in more than one place
Bath re-enamelling at your home in Coates
We do not move the bath, so your taps, tiles and plumbing are left alone. It usually takes one visit, with the bath ready to use the following day. We’re often asked to fix a peeling or bubbling previous coating and several chips and rust patches, in Victorian roll-tops, cast iron baths and acrylic baths.
Peace of mind is built in: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Where
- Coates (GL7)
- County
- Gloucestershire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Signs you need bath re-enamelling in Coates
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Resurfacing sorts them out together.
You may need us if you’ve spotted:
- Wear marks under the taps
- A period or roll-top bath worth keeping
- An outdated colour you’d like to change
- Stains that will not shift
Questions to ask before you book
- How the room is protected while they work
- If travel is included in the price
- Who will actually do the work
- Whether they match the colour on site
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
Materials and what they mean for the repair
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we pay close attention there.
What happens on the day
A typical visit goes like this: we arrive on time, protect everything around the work area, do the job and tidy away. Allow a full day. Before leaving, we tell you how long to leave it and how to look after it.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Tell us about parking, stairs or access
- Point us to the nearest place to park
- Make sure the area is dry
Get a quote
There is no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Advice
Keeping it looking good
Looking after the surface is easy:
- Rinse off hair dye, oils and bath bombs straight away
- Fix dripping taps quickly
- Keep toiletries on a shelf rather than in the bath
- Never use suction bath mats
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
Honest limits
Honesty matters more than a booking, so here’s what a repair won’t do:
- Leaks from fittings rather than the bath
- A metal bath with a through crack
- Problems we can’t see until an old finish comes off
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
What bath re-enamelling costs
Resurfacing from £350. We charge the same across the UK, including Coates. What changes the price is:
- Whether old repairs or coatings need taking off
- The material
- Whether we combine several jobs
- Access to the area
A repair is priced on what needs doing, not where you live. You will see the full price before you book.
Quotes from your pictures
Before you send photos, these tips help us give you a firm price:
- A picture taken from further back
- Any earlier repairs or coatings
- Any details about the material
- Something in shot to show the size
Upload photos of the damage and a wider shot of the whole item, and tell us you’re in Coates, and we will reply with a fixed quote.
Where we work around Coates
Coates is about 3 miles west of Cirencester, in Gloucestershire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Coates is one of 470 places in Gloucestershire where we work. Our nearest city page is Birmingham, about 53 miles away.
Here we cover the GL7 postcode area. Streets in the area include May Tree Close, Trewsbury Road and Quakers Row, all of which we cover. Other places close to Coates include Sapperton (3 miles north-west), Daglingworth (3 miles north), Daneway (3 miles north-west), Middle Duntisbourne (4 miles north) and Edgeworth (4 miles north-west). We also work in nearby towns such as Cheltenham (13 miles north), Gloucester (13 miles north-west), Stroud (9 miles west), St Paul's (14 miles north), Cirencester (3 miles east) and Lansdown (13 miles north).
Near you in Coates
Our clients here include homes close to Tunnel House Inn, Church of St Matthew and Cirencester Deer Park School. Coates’s nearest station is Kemble station, roughly 2.1 miles south. Well-known places in the area include Smerrill Farm Museum (1.6 miles south-east) and Cirencester Hospital (2.4 miles east). Open spaces near Coates include Siccaridge Wood.
Work for landlords and builders
We work for landlords, letting agents and housing providers in Coates as well as homeowners. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
Your questions about bath re-enamelling in Coates
Do I need to be at home?
We need someone to let us in. You do not need to watch us work.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you repair several things at once?
Of course, and it typically saves money. Send pictures of everything together and we’ll quote them together.
What do you need from me?
Photos of the damage, a photo of the entire bath and your postcode. Then we will agree a date.
How much does bath re-enamelling cost in Coates?
Prices start from £350. Every job gets a fixed quote based on pictures of the damage. Send a close-up and a photo of the whole item with your GL7 postcode.
Which areas do you work in?
We work UK-wide. Our prices are the same everywhere.
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
Places near Coates
More services for Coates
About our accreditations · Every repair comes with a one-year guarantee.
