Gloucestershire · England
Bath re-enamelling & resurfacing in Sapperton, Gloucestershire
Full bath re-enamelling and resurfacing in Sapperton, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A peeling or bubbling previous coating
- An original cast iron bath that needs restoring
About our bath re-enamelling in Sapperton
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. We work on acrylic baths, basins & shower trays and pressed steel baths, and the jobs we see most are stains that won’t shift and a bath in a colour that no longer suits.
Every repair is covered by our one-year guarantee.
- Area
- Sapperton (GL7)
- Area hub
- Gloucestershire
- Warranty
- A year, on every repair
- Quote
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Keeping it looking good
So the finish stays in good condition for years:
- Stick to gentle, non-abrasive cleaners
- Don’t leave bottles, razors or sponges standing on the surface
- A quick wipe after use keeps limescale away
- Do not leave a chip unrepaired
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. It’s simpler to resurface before they spread.
Landlords, agents and businesses in Sapperton
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
How we price bath re-enamelling
Resurfacing from £350. We charge the same across the UK, including Sapperton. What changes the price is:
- Previous DIY repairs that have to come out
- Whether we combine several jobs
- Whether it’s a chip, crack, burn or wear
- The material
Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.
Send pictures for a quote
Phone photos are fine. Ensure they show:
- One sharp close-up of the damage
- The postcode, so we can plan the visit
- A photo taken from further back
- Natural light rather than flash
If you’re in Sapperton and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Also near Sapperton
Other services in Sapperton
Sapperton: your questions answered
Do you charge for travel?
There’s no separate call-out charge. Your fixed price includes everything.
Do you cover the entire of Gloucestershire?
The whole UK, including all of Gloucestershire. Just include your postcode and we will offer you dates.
Is it worth repairing rather than replacing?
Normally, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.
Can a failed resurfacing be redone?
Usually, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
How long is the bath unusable?
Most baths are done in a day, ready the following day. We will confirm timings when we quote.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Do you come to Sapperton?
Yes. We work across the UK and come to Sapperton. Send photos and we will quote, or call 0345 017 0787.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across Gloucestershire.
Our work in Sapperton
Sapperton is about 5 miles west of Cirencester, in Gloucestershire. Jobs in Sapperton are booked in like any other job: a fixed price from your photos, then a visit to do the work. Our technicians cover all 470 towns and villages in Gloucestershire. We work right across the region, from Sapperton to Birmingham (52 miles away).
Postcode districts we cover here: GL7. Jobs here include addresses on Church Lane and The Glebe and the roads around them. We also cover the places around Sapperton: Daneway (1 mile west), Edgeworth (2 miles north), Coates (3 miles south-east), Middle Duntisbourne (3 miles north-east) and Daglingworth (3 miles east). Within a short drive, we also cover Cheltenham (12 miles north), Gloucester (11 miles north-west), Stroud (7 miles west), St Paul's (12 miles north), Cirencester (5 miles east) and Lansdown (12 miles north).
Near you in Sapperton
We visit homes around The Bell at Sapperton pub, St Kenelm's Church and Sapperton Church of England Primary School, among other places. The nearest railway station is Kemble station, about 4.3 miles south-east. Further afield, we also cover the area around Miserden Castle (3.7 miles north) and Cirencester Hospital (4.5 miles east). Green spaces nearby include Siccaridge Wood.
Repair or replace in Sapperton?
Replacing a bath usually involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, with the bath ready the next day. Our bath re-enamelling starts from £350. Set against the cost of replacement, repairing normally costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why Sapperton customers choose us
- Everything repaired in place
- One visit for most repairs
- Repair technicians who travel to you, UK-wide
- One price list for the entire UK
Read our prices page or bath cost comparison.
What we can’t put right
Some jobs aren’t right for a repair, including:
- Leaking taps or wastes (a plumber’s job)
- A metal bath with a through crack
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send photos and we will give you a straight answer.
What we work on
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
How it works
There is not much you need to do on the day. Show us the job, point us to the room, and we’ll take it from there. Most visits take a full day, including clearing up.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s typically ready the following day.
Getting ready for the visit
- Keep a parking space free if you can
- Clear toiletries, mats and anything else from around the area
- Tell us if there are stairs or a lift
Getting a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.
Advice
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
About our accreditations · Every repair comes with a one-year guarantee.
