Cheshire West and Chester · England
Bath re-enamelling & resurfacing in Coddington, Cheshire West and Chester
Bath re-enamelling in and around Coddington: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Worn patches where water runs and sits
About our bath re-enamelling in Coddington
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. If you are dealing with wear marks under the taps and a bath in a colour that no longer suits, we can help, whatever the material.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before booking.
- Where
- Coddington (CH3)
- Area hub
- Cheshire West and Chester
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What bath re-enamelling costs
Prices start from £350. You will not pay by the hour. The price depends on:
- What the surface is made of
- Unusual colours or finishes
- Whether old repairs or coatings need taking off
- How many items we do on one visit
Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it.
Quotes from your pictures
It only takes a minute to photograph the damage. Try to send:
- What it’s made of, if you know
- A coin beside the damage so we can judge size
- A picture taken from further back
- Whether it’s been repaired or coated before
For a price in Coddington, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
How to look after the repair
Most damage we see is avoidable. These habits help:
- A quick wipe after use keeps limescale away
- Avoid suction-cup mats
- Do not leave a chip unrepaired
- Respect the curing time we give you
Dry the bath after use if possible, especially in hard water areas, and rinse away any product left on the surface.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Coddington and the surrounding area
Coddington is about 7 miles south-east of Chester, in Cheshire West and Chester. Book a date that suits you, and you’ll know when to expect us, so you’re not left waiting in all day. We cover all 224 towns and villages in Cheshire West and Chester, from the larger towns to small villages. You can also see our page for Liverpool, about 22 miles away.
Every address in CH3 is covered. Neighbouring places we cover include Barton (1 mile south), Stretton (2 miles south), Crewe-by-Farndon (2 miles south-west), Farndon (2 miles south-west) and Holt (3 miles south-west). Within a short drive, we also cover Chester (7 miles north-west), Ellesmere Port (13 miles north), Winsford (13 miles north-east), Boughton (7 miles north-west), Frodsham (14 miles north) and Hoole (7 miles north).
Near you in Coddington
Around Coddington, we work in homes near St Mary's Church, among other places. A little further out are Museum of Amusements (2.8 miles north-east) and Bolesworth Castle (2.7 miles east). Not far away are Bickerton Hill.
What else we do in Coddington
What a repair can’t fix
We will not take on work that won’t last, so here’s what a repair can’t put right:
- Leaks from fittings rather than the bath
- A bath split right through the body
- Damage hidden under a previous coating, until it’s stripped back
Not sure? Send pictures and we will give you a straight answer before you book.
Materials we repair
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
How it works
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes most of the day, and we finish by cleaning up and talking you through the result.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s usually ready the following day.
How to prepare
- Open a window if you can
- Plan for the room to be out of bounds to pets and children
- Clear the area around the damage
Ask for a price
Email us photos of the damage and a wider shot of the entire item, with your CH3 postcode, and we’ll come back with a fixed quote.
Related advice
Common problems we fix in Coddington
A dull surface stains and holds dirt, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.
People normally call us after spotting something like this:
- A dull, rough surface that will not come clean
- Stains that will not shift
- An outdated colour you’d like to change
- Lots of chips and rust spots
Questions to ask before you book
- What happens if the damage is worse than the pictures show
- Whether cleaning and preparation are in the price
- What aftercare is recommended
- Who will actually do the work
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Coddington: your questions answered
Is a repair better than a new one?
Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders in Coddington.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
What if the damage is worse than the photos show?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
How long is the bath unusable?
Most baths are done in a day, ready the day after. We give you timings with the quote.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
Work for landlords and builders
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
Builders use us to fix snagging damage before handover. We can visit several plots in one trip.
Repair or replace in Coddington?
A refit takes several trades and several days. Re-enamelling takes one technician and typically one day, and the bath can be used the day after. Our bath re-enamelling starts from £350. Our prices are the same across the UK, so there is no premium for Coddington. The job itself decides the price: how much damage, what it’s made of and how many items.
Why Coddington customers choose us
- No need to remove anything
- Most jobs done in one visit
- CHAS and Constructionline accredited
- A year’s guarantee on all work
Read our prices page and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
