Wrexham · Wales
Bath re-enamelling & resurfacing in Holt, Wrexham
Local bath re-enamelling for Holt: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A coloured bath you want in white
- A bath that stays dull however much you clean it
What a repair cannot fix
In fairness, there are a few things a repair won’t fix:
- Steel that has corroded right through
- Plumbing leaks, which need a plumber
- Problems we can’t see until an old finish comes off
If in doubt, send photos and we’ll say what we think.
What we work on
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Acrylic baths
Bath re-enamelling in Holt without replacing anything
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. We’re frequently asked to fix a roll-top that’s seen better days and enamel that’s lost its shine and feels rough, in pressed steel baths, Victorian roll-tops and cast iron baths.
You get a one-year guarantee, the same in Holt as everywhere else we work.
- Where
- Holt (LL13)
- Area hub
- Wrexham
- Guarantee
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Why repair rather than replace?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Our bath re-enamelling starts from £350. A repair normally costs much less than people expect, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
What you get with us
- CHAS, Constructionline and SafeContractor accredited
- We leave the room as we found it
- Same prices wherever you are
- One-year guarantee on every repair
See our prices page and guide to resurfacing and replacement costs.
Nearby places to Holt
Also in Holt
FAQs for Holt
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
I rent my home. Can I book you?
Yes. Ask your landlord first, and we can send them the quote if that helps.
What areas do you cover?
Across the UK. Prices do not change with location.
Do the materials smell?
It depends on the job, but frequently a little. Open windows and an extractor fan help, and it soon fades.
Can I add another job to the visit?
Yes, and it’s often cheaper. Send pictures of everything together and you’ll get one combined price.
Do you cover Holt?
Yes. We cover the entire UK and come to Holt. Send photos and we will quote, or call 0345 017 0787.
Is my repair covered?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Is there a smell?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
How it works
Visits start with a quick look at the job together, so you know exactly what we’re doing. Then the area is sheeted and masked and we start. Allow a full day, and we’ll keep you posted as we go.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Before we arrive
- Open a window if you can
- Have somewhere for us to park nearby if possible
- Let us know about parking or access
Get a quote
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price.
Advice
Landlord and trade work in Holt
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
We are used to working with agents and managing companies. Send the address, photos and access details and we’ll arrange it.
Looking after it afterwards
Once the work has cured, treat it gently:
- Stick to gentle, non-abrasive cleaners
- Do not use the bath until it has fully cured
- Repair dripping taps early
- Don’t leave a chip unrepaired
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.
What we are called out for in Holt
Older baths often have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Common reasons people in Holt contact us are:
- Chips and rust in more than one place
- A coating lifting around the plughole
- A dull, rough surface that won’t come clean
- Thin, worn enamel in places
Comparing quotes
- Whether they match the colour on site
- If travel is included in the price
- Who will actually do the work
- How soon you can use it again
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Prices and what affects them
Prices start from £350. You’ll know the full cost before booking. We take into account:
- Any earlier repairs that need removing first
- What the surface is made of
- Whether we combine several jobs
- The size and number of damaged areas
We charge the same wherever you are, so there’s no premium for Holt. The job itself decides the price: how much damage, what it’s made of and how many items.
How to get a fixed quote
You can normally get a fixed price without us visiting. To help us price it:
- The material, if you know it
- Good light, ideally daylight, without flash glare
- A picture taken from further back
- A coin or ruler next to the damage for scale
Most clients in Holt get their price from photos. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Holt and the surrounding area
Holt is about 5 miles north-east of Wrexham, in Wrexham. We visit clients in Holt and the surrounding area, so you do not need to take anything anywhere. Holt is one of 115 towns and villages in Wrexham where we work. Our jobs stretch from Holt to Liverpool (about 23 miles away).
Every address in LL13 is within our area, from the main roads to the quietest streets. From Castle Street, Fairview and Castle Mews or anywhere nearby, a technician can come to you. If you’re just outside Holt, we cover Farndon (1 mile north-east), Crewe-by-Farndon (1 mile east), Stretton (2 miles east), Barton (2 miles east) and Coddington (3 miles north-east). Further out, we also cover Wrexham (5 miles south-west), Caia Park (4 miles south-west), Offa (6 miles south-west), Rhosllannerchrugog (8 miles south-west), Rhosddu (5 miles west) and Acton (4 miles west).
Landmarks near Holt
Around Holt, we work in homes near Hand & Heart Hotel, Holt English Presbyterian Church and Holt's Community Primary School. Nearby you will also find Holt Castle (under half a mile east) and Trevalyn Manor (3.1 miles north-west). Not far away are Pant-yr-ochain Big Pool and Wilderness Tip (Gresford).
About our accreditations · Every repair comes with a one-year guarantee.
