Telford and Wrekin · England

Bath re-enamelling & resurfacing in Crudgington, Telford and Wrekin

Problem with your bath in Crudgington? We put it right where it is, match it on site and back it with a one-year guarantee.

  • Resurfacing from £350
  • An outdated colour you’d like to change
  • A bath that stays dull however much you clean it
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Crudgington?

How we handle bath re-enamelling in Crudgington

Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. We’re frequently asked to fix an old resurfacing that’s failing and several chips and rust patches, on Victorian roll-tops, acrylic baths and basins & shower trays.

Your repair is guaranteed for a year, as with every job we do.

Location
Crudgington (TF6)
Region
Telford and Wrekin
Cover
12 months on all our work
Quotes
From £350. Free and fixed, from your pictures
Telephone
0345 017 0787
Page updated
23 October 2026
Before and after: an old basin refinished to bright white

The process

On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job usually takes the best part of a day. We tidy up before we leave and tell you when it’s ready to use.

  1. We mask and protect the room and ventilate it.
  2. We clean and degrease the bath and repair any chips or rust.
  3. We key the surface and put on a bonding primer.
  4. We spray several coats of new enamel finish.
  5. The bath is left to cure and can normally be used the next day.

How to prepare

  • Make sure the room can be ventilated
  • Avoid using the area for a few hours before we arrive
  • Mention any parking restrictions or tricky access

Getting a price

Email us a photo of the damage and a wider shot of the entire item, and tell us you’re in Crudgington, and we will reply with a fixed quote.

Get a free quote

Related advice

Keeping it looking good

Much of the damage we repair could have been avoided. A few tips:

  • Don’t use the bath until it has fully cured
  • Wash away dyes and oils after use
  • Get any chip repaired quickly
  • Never use suction bath mats

Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.

On a worn bath, rust spots keep spreading, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.

What bath re-enamelling costs

Prices start from £350. There’s no area surcharge for Crudgington. The price reflects:

  • How many items we do on one visit
  • The material and finish
  • The colour and finish to match
  • How easy the damage is to reach

We charge the same wherever you are, so there’s no premium for Crudgington. What changes the price is the job itself: the material, the amount of damage and how many items.

Getting a price from pictures

Most quotes are done from pictures alone. To help us price it:

  • A coin or ruler next to the damage for scale
  • A close-up of the damage, in focus
  • A photo taken from further back
  • The postcode, so we can plan the visit

Most clients in Crudgington get their price from photos. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.

Where we work around Crudgington

Crudgington is about 6 miles north-west of Telford, in Telford and Wrekin. Jobs in Crudgington are booked in like any other job: a fixed quote from your photos, then a visit to do the work. We cover all 79 towns and villages in Telford and Wrekin, from the larger towns to small villages. You can also see our page for Birmingham, about 34 miles away.

All of TF6 is within our area. That includes homes on Crugetone Way, Churn Close and Old Dairy Lane. Being close to the B5062, Crudgington is simple for us to get to. Other places close to Crudgington include Waters Upton (1 mile north), Cotwall (1 mile west), Longdon on Tern (2 miles south-west), Cold Hatton Heath (2 miles north) and Cold Hatton (2 miles north). We also work in nearby towns such as Telford (6 miles south-east), Wellington (4 miles south), Dawley (8 miles south-east), Oakengates (6 miles south-east), Newport (7 miles east) and The Rock (7 miles south-east).

Near you in Crudgington

In Crudgington, that means homes near Crudgington Primary School, Bharat Indian pub and St Mary, among other places. The nearest railway station is Wellington (Shropshire) station, roughly 4.3 miles south. A little further out are Princess Royal Hospital (3.7 miles south-east) and Charlton Castle (4.8 miles south-west).

Map of Crudgington © OpenStreetMap contributors

Landlords, agents and businesses in Crudgington

We’re used to working with agents and managing companies. Just send photos, the address and how to get access.

Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

Your questions about bath re-enamelling in Crudgington

Do you charge for travel?

No. Our quotes include travel, with the same prices everywhere we work.

Will there be a smell?

A little, depending on the job. Open windows and an extractor fan help.

How quickly can you book me in?

It depends on the time of year and where you are. We’ll offer you dates when we send your quote.

Does someone need to be in?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

Can you do more than one item on the same visit?

Of course, and it normally saves money. Send pictures of everything together and you will get one combined price.

Can you re-enamel a roll-top bath?

Yes. Inside and out if you’d like.

Can pets and children be at home?

Keep pets and children away from the work area on the day.

It’s been repaired before. Can you still fix it?

Usually, yes. The old repair comes out first, so let us know about it.

When a repair is not the answer

A few problems are outside what a surface repair can do:

  • A cast iron or steel bath that is cracked right through
  • Problems we cannot see until an old finish comes off
  • Plumbing leaks, which need a plumber

Send us photos and we will tell you honestly.

Surfaces we repair

  • Acrylic baths
  • Basins & shower trays
  • Pressed steel baths
  • Cast iron baths
  • Victorian roll-tops

Should I try a DIY kit first?

A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

What we’re called out for in Crudgington

A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.

Signs it’s time to call us include:

  • A bath that stays dull however much you clean it
  • Brown or grey marks that do not clean off
  • A bath in a colour that no longer suits
  • Lots of chips and rust spots

What your quote should include

  • Whether they match the colour on site
  • How soon you can use it again
  • Who will actually do the work
  • How your room will be protected

How to compare quotes

Materials and what they mean for the repair

Pressed steel

Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.

Acrylic

We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.