Staffordshire · England
Bath Re-enamelling for Cold Well homes
Bath re-enamelling for Cold Well, without a refit. Send us photos for a fixed price, then book a visit.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- Wear marks under the taps
Bath re-enamelling in Cold Well, done in place
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. Whether it’s a bath that stays dull however much you clean it and lots of chips and rust spots, we can generally put it right, on basins & shower trays, acrylic baths and pressed steel baths alike.
You get a one-year guarantee, the same in Cold Well as everywhere else we work.
- Location
- Cold Well (WS15)
- Area hub
- Staffordshire
- Cover
- A year, on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
When to call us in Cold Well
Hard water speeds up the wear, and abrasive cleaners do the most damage.
Most people get in touch after spotting something like this:
- Wear marks under the taps
- Enamel that is lost its shine and feels rough
- Brown or grey marks that don’t clean off
- A coating lifting around the plughole
Questions to ask before you book
- What prep work is covered
- What aftercare is recommended
- Whether the price covers travel
- How long it needs to cure
Repair or replace: which is better?
If the bath is sound, re-enamelling is usually much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.
Why book with us
- Straight answers about what a repair can do
- Accredited with CHAS, Constructionline and SafeContractor
- Colours mixed by hand to suit your surface
- One price list for the whole UK
Read our full price list or bath cost comparison.
FAQs for Cold Well
What happens once I’ve sent pictures?
We check the damage, the material and your postcode, then reply with a quote with dates.
How quickly can you book me in?
We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Is repairing better than replacing?
Typically, if the item is otherwise sound. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the photos cannot show what we need.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
It’s been repaired before. Can you still fix it?
Yes, regularly. It can add a little time, which we include in the quote.
What does bath re-enamelling cost?
Resurfacing from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
What we can’t put right
We will not take on work that won’t last, so these are the limits:
- Holes rusted through the metal
- A poorly supported acrylic bath, until it’s firmed up
- A cast iron or steel bath that is cracked right through
Not sure? Send photos and we’ll give you a straight answer before you book.
Materials we repair
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Basins & shower trays
About Cold Well
Cold Well is about 2 miles north of Burntwood, in Staffordshire. Jobs in Cold Well are booked in like any other job: a fixed quote from photos, then a visit to do the work. Cold Well is one of 512 places in Staffordshire where we work. You can also see our page for Birmingham, about 16 miles away.
Postcode districts we cover here: WS15. Neighbouring places we cover include Goosemoor Green (1 mile east), Windmill Bank (1 mile north-west), Gentleshaw (1 mile west), Cannock Wood (1 mile west) and Prospect Village (1 mile west). Further out, we also cover Stafford (11 miles north-west), Burton upon Trent (13 miles north-east), Tamworth (11 miles south-east), Cannock (4 miles west), Lichfield (4 miles south-east) and Rugeley (4 miles north).
Near you in Cold Well
In Cold Well, that means homes near Gentleshaw Primary Academy, Prince's Park and Chase Terrace Technology College and the streets around them. For rail, the closest station is Rugeley Town station, roughly 3.6 miles north. Nearby you’ll also find St Matthew's Hospital (1.8 miles south-east) and Cannock Castle Ring (1.1 miles north-west). Not far away are George's Hayes and Minster Pool.
Places near Cold Well
Other services in Cold Well
What happens on the day
We turn up at the time we agreed with you and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. Most visits take most of the day, and the room is left clean and tidy.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Ensure the room can be ventilated
- Let the surface dry out before the visit
- Mention if the room is upstairs or in a flat
Getting a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price.
Read more
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Repairs by material
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Keeping it looking good
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Repair dripping taps early
- Do not leave a chip unrepaired
- Keep toiletries on a shelf rather than in the bath
- Respect the curing time we give you
Stick to mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
How we price bath re-enamelling
Prices start from £350. We do not charge extra for travel to Cold Well. The price depends on:
- The type of damage
- How much damage there is
- Whether we combine several jobs
- Access to the area
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Getting a price from photos
Two or three clear pictures are generally enough. It helps if you send:
- Something in shot to show the size
- The material, if you know it
- Daylight if possible, and no flash reflection
- Details of any past repairs
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. You will get a fixed quote, not an estimate.
About our accreditations · Every repair comes with a one-year guarantee.
