Staffordshire · England
Bath Re-enamelling for Prospect Village homes
Bath re-enamelling in and around Prospect Village: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Thin, worn enamel in places
Why repair rather than replace?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, with the bath ready the following day. Our bath re-enamelling starts from £350. Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
Why book with us
- Technicians who travel to you, UK-wide
- We leave the room as we found it
- Everything repaired in place
- Every repair guaranteed for a year
See our pricing and resurfacing vs replacement cost guide.
Bath re-enamelling at your home in Prospect Village
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, and we take our time over it. We are often asked to fix enamel that’s lost its shine and feels rough and a coating lifting around the plughole, across basins & shower trays, pressed steel baths and cast iron baths.
You get a one-year guarantee, the same in Prospect Village as everywhere else we work.
- Location
- Prospect Village (WS12)
- Area hub
- Staffordshire
- Cover
- A year, on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Places near Prospect Village
More services for Prospect Village
What we cannot put right
Not everything can be repaired, and we’d rather say so up front. Repairs will not solve:
- A poorly supported acrylic bath, until it’s firmed up
- Holes rusted through the metal
- A bath split right through the body
If in doubt, send photos and we will say what we think.
Materials we work on in Prospect Village
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Cast iron baths
Prospect Village questions
Can you do the outside of a roll-top?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
Can you repair several things at once?
Yes, and it’s often cheaper. Send pictures of everything together and we will quote them together.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
How durable is a resurfaced bath?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
Will the bath be moved?
Not at all. Everything is done in your bathroom, with the room masked and ventilated.
What areas do you cover?
We work UK-wide. Prices don’t change with location.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
What affects the price in Prospect Village
Prices start from £350. We charge the same across the UK, including Prospect Village. What changes the price is:
- Whether old repairs or coatings need taking off
- The size and number of damaged areas
- Access to the area
- Unusual colours or finishes
Our prices are the same across the UK, so there is no premium for Prospect Village. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Quotes from your pictures
A couple of clear pictures is all it takes. Try to include:
- What it’s made of, if you know
- Something in shot to show the size
- One sharp close-up of the damage
- The postcode, so we can plan the visit
For a price in Prospect Village, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
What we’re called out for in Prospect Village
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
It’s worth getting a quote if you see:
- Thin, worn enamel in places
- Lots of chips and rust spots
- A period or roll-top bath worth keeping
- Brown or grey marks that don’t clean off
Comparing quotes
- When it can be used again
- The length of the guarantee and what it covers
- Who turns up on the day
- Whether cleaning and preparation are in the price
Covering Prospect Village
Prospect Village is about 2 miles north-west of Burntwood, in Staffordshire. Wherever you are in the WS12 postcode area, we come to you. We cover all 512 towns and villages across Staffordshire. You can also see our page for Birmingham, about 16 miles away.
Our visits in WS12 are booked in the same way as anywhere else. That includes homes on Danby Drive, Ironstone Road and Briars Way and the roads around them. Neighbouring places we cover include Cannock Wood (1 mile north-east), Rawnsley (1 mile north-west), Hazelslade (1 mile north-west), Gentleshaw (1 mile east) and Wimblebury (1 mile west). Larger places within reach include Stafford (10 miles north-west), Burton upon Trent (15 miles north-east), Tamworth (12 miles south-east), Cannock (3 miles west), Lichfield (5 miles east) and Rugeley (4 miles north).
Near you in Prospect Village
Locally, our jobs take us to homes close to Norton Canes High School, Christ Church and Holly Grove Primary School. For rail, the closest station is Hednesford station, roughly 2.2 miles west. Well-known places in the area include Cannock Castle Ring (0.9 miles north-east) and St Matthew's Hospital (2.9 miles south-east). Green spaces nearby include George's Hayes.
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot.
Keeping it looking good
It’s all simple stuff, just a few sensible habits:
- Rinse off hair dye, oils and bath bombs straight away
- Don’t leave bottles, razors or sponges standing on the surface
- Fix dripping taps quickly
- A quick wipe after use keeps limescale away
A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
How it works
The work is clean and fairly quiet. Protection goes down first, then the work takes the best part of a day. Before we leave, we explain the curing time and the aftercare.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Ensure the room can be ventilated
- Mention if the room is upstairs or in a flat
- Let the surface dry out before the visit
Ask for a price
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
