Staffordshire · England
Bath re-enamelling & resurfacing in Gentleshaw, Staffordshire
Bath re-enamelling for Gentleshaw, without a refit. Send us photos for a fixed price, then we come to you.
- Resurfacing from £350
- Thin, worn enamel in places
- A period or roll-top bath worth keeping
Bath re-enamelling in Gentleshaw, done in place
Most baths are re-enamelled in a day. Taps, tiles, panels and plumbing all stay in place. Our repair technicians work on acrylic baths, pressed steel baths and cast iron baths, and people most frequently call us about worn patches where water runs and sits and staining under the taps and around the waste.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Area
- Gentleshaw (WS15)
- Area hub
- Staffordshire
- Cover
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Where we work around Gentleshaw
Gentleshaw is about 2 miles north of Burntwood, in Staffordshire. From the centre of Gentleshaw to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. Gentleshaw is one of 512 places in Staffordshire we cover. Our nearest city page is Birmingham, about 16 miles away.
Here we cover the WS15 postcode area. Whether you live on Windmill Lane, Shaw Lane and Common Side or a nearby road, a technician can come to you. Other places close to Gentleshaw include Cold Well (1 mile east), Windmill Bank (1 mile north-east), Cannock Wood (1 mile north-west), Goosemoor Green (1 mile east) and Prospect Village (1 mile west). We also work in nearby towns such as Stafford (11 miles north-west), Burton upon Trent (14 miles north-east), Tamworth (11 miles south-east), Cannock (4 miles west), Lichfield (4 miles east) and Rugeley (4 miles north).
Landmarks near Gentleshaw
Typical jobs here are in homes near Christ Church, Gentleshaw Primary Academy and Chase Terrace Technology College. Gentleshaw’s nearest station is Hednesford station, about 3.3 miles west of the centre. Further afield, we also cover the area around Cannock Castle Ring (0.9 miles north-west) and St Matthew's Hospital (2 miles south-east). Open spaces near Gentleshaw include George's Hayes and Minster Pool.
Common problems we fix in Gentleshaw
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
Common reasons people in Gentleshaw contact us include:
- A bath that stays dull however much you clean it
- Chips and rust in more than one place
- Staining under the taps and around the waste
- An original cast iron bath that needs restoring
Before booking anyone
- Whether there are any call-out or travel charges
- What preparation is included
- How long the guarantee is and what it covers
- When it can be used again
Repairs by material
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Nearby places to Gentleshaw
What else we do in Gentleshaw
Why repair rather than replace?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and usually a day, with the bath back in use the day after. Our bath re-enamelling starts from £350. What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your photos, so there are no surprises on the day.
What you get with us
- A fixed quote before booking
- Rooms protected and left tidy
- One price list for the entire UK
- Colour mixed on the day to match
See our full price list or guide to resurfacing and replacement costs.
What a repair can’t fix
A repair is not right for every job, for example:
- Steel that has corroded right through
- Problems we cannot see until an old finish comes off
- Leaks from fittings rather than the bath
Not sure? Send pictures and we’ll give you a straight answer before booking.
Materials we work on in Gentleshaw
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
What affects the price in Gentleshaw
Prices start from £350. A fixed quote means you know the cost before booking. We look at:
- What kind of damage it is
- How many areas need work
- Previous DIY repairs that have to come out
- Where the damage is and how we get to it
We charge the same wherever you are, so there is no premium for Gentleshaw. What changes the price is the job itself: the material, the amount of damage and how many items.
Quotes from your photos
It only takes a minute to photograph the damage. Please include:
- Good light, ideally daylight, without flash glare
- What it’s made of, if you know
- Your postcode, so we can check dates
- Any earlier repairs or coatings
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job the same day in most cases.
What we do, step by step
Arrival times are agreed in advance. On site, it takes a full day for most jobs. The room is left tidy.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can usually be used the next day.
Before we arrive
- Mention any earlier repairs or resurfacing
- Let us know which floor the room is on
- Plan for the room to be out of bounds to pets and children
Ask for a price
Most clients in Gentleshaw get their price from photos. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Related advice
For landlords and businesses
If you manage property in Gentleshaw, we can repair and quote for several addresses together. Send pictures for each one and we’ll price them together.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Your questions about bath re-enamelling in Gentleshaw
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Can a failed resurfacing be redone?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
What happens once I’ve sent pictures?
We look at the photos and reply with a fixed quote and some dates. If we need another angle, we will ask.
What information do you need?
Send pictures through the quote form or call 0345 017 0787, and we will do the rest.
Will the bath be moved?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.
What does bath re-enamelling cost?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before booking.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
About our accreditations · Every repair comes with a one-year guarantee.
