Staffordshire · England
Bath re-enamelling & resurfacing in Windmill Bank, Staffordshire
Fixed-price bath re-enamelling in Windmill Bank and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- A coloured bath you want in white
Bath re-enamelling at your home in Windmill Bank
If your bath is sound but looks tired, resurfacing is normally the best value. There’s no removal, plumbing or tiling involved. We work on cast iron baths, pressed steel baths and basins & shower trays, and common reasons people contact us are a coating lifting around the plughole and stains that won’t shift.
Every job is backed for twelve months in Windmill Bank and everywhere else. We return to put right any problem with the work.
- Location
- Windmill Bank (WS15)
- Region
- Staffordshire
- Cover
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Prices and what affects them
Prices start from £350. Each job gets its own fixed quote. These are the things that affect it:
- What kind of damage it is
- Previous DIY repairs that have to come out
- The material
- Where the damage is and how we get to it
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
Quotes from your pictures
The better the photos, the more accurate the price. Here’s what we find most useful:
- Any details about the material
- A photo taken from further back
- Whether it’s been repaired or coated before
- The postcode, so we can plan the visit
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them over. You’ll get a fixed quote, not an estimate.
Towns and villages near Windmill Bank
Also in Windmill Bank
Windmill Bank questions
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
What areas do you cover?
Across the UK, so Windmill Bank is covered. Prices don’t change with location.
Can you fix a peeling bath coating?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Is there a smell?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
Can you quote from photos?
Nearly always. If photos don’t show enough, we will ask for another angle.
Is the work guaranteed?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
Looking after it afterwards
Most damage we see is avoidable. A few tips:
- Rinse off hair dye, oils and bath bombs immediately
- Get any chip repaired quickly
- Don’t leave bottles, razors or sponges standing on the surface
- Keep suction mats out of the bath
Wipe the bath dry after use where you can, and rinse away any product left on the surface.
Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
What we’re called out for in Windmill Bank
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
Clients typically contact us about:
- A coloured bath you want in white
- Stains that won’t shift
- Worn patches where water runs and sits
- A bath that stays dull however much you clean it
What your quote should include
- The length of the guarantee and what it covers
- Whether the price is fixed and includes VAT
- How the room is protected while they work
- Aftercare advice
Can I fix it myself?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
Where we work around Windmill Bank
Windmill Bank is about 2 miles north of Burntwood, in Staffordshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Windmill Bank is one of 512 places in Staffordshire where we work. You can also see our page for Birmingham, about 16 miles away.
Every address in WS15 is within our area, from the main roads to the quietest streets. Jobs here include addresses on Malt House Road and Windmill Bank. We also cover the places around Windmill Bank: Cold Well (1 mile south-east), Gentleshaw (1 mile south-west), Goosemoor Green (1 mile south-east), Cannock Wood (1 mile west) and Prospect Village (1 mile west). Within a short drive, we also cover Stafford (11 miles north-west), Burton upon Trent (13 miles north-east), Tamworth (11 miles south-east), Cannock (4 miles west), Lichfield (4 miles south-east) and Rugeley (3 miles north).
Local landmarks in Windmill Bank
In Windmill Bank, that means homes near Gentleshaw Primary Academy, Christ Church and Chase Terrace Technology College. The closest station to Windmill Bank is Rugeley Town station, about 3.3 miles north of the centre. Further afield, we also cover the area around St Matthew's Hospital (2.1 miles south-east) and Cannock Castle Ring (0.8 miles north-west). Green spaces nearby include Minster Pool and George's Hayes.
What we do, step by step
The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the work takes most of the day. At the end we talk you through the curing time and the aftercare.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Ensure the room can be ventilated
- Avoid using the area for a few hours before we arrive
- Tell us if there are stairs or a lift
Ask for a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Related advice
Why repair rather than replace?
Replacing the bath means a plumber, removing a heavy bath, re-tiling or making good the walls and several days without a working bathroom. Re-enamelling gives the bath a new finish without moving it. Prices start from £350. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Why us?
- Dust sheets down, tidy finish
- CHAS and Constructionline accredited
- Fixed prices from your pictures
- Straight answers about what a repair can do
Read our pricing or guide to resurfacing and replacement costs.
Landlord and trade work in Windmill Bank
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
About our accreditations · Every repair comes with a one-year guarantee.
