Wiltshire · England
Bath re-enamelling & resurfacing in Old Sarum, Wiltshire
Full bath re-enamelling and resurfacing in Old Sarum, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Several chips and rust patches
- Thin, worn enamel in places
Repairing versus replacing in Old Sarum
Replacing a bath can take several days across several trades. Re-enamelling is one technician, typically one day, and the bath is usable the day after. Resurfacing from £350, with every job priced individually. Our prices are the same across the UK, so there’s no premium for Old Sarum. What changes the price is the job itself: how much damage, what it’s made of and how many items.
What you get with us
- Most jobs done in one visit
- No need to remove anything
- No extra charge for your area
- Free fixed quotes from pictures
Read our full price list and guide to resurfacing and replacement costs.
Bath re-enamelling in Old Sarum without replacing anything
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. If you’re dealing with a coloured bath you want in white and thin, worn enamel in places, we can normally put it right, on basins & shower trays, pressed steel baths and cast iron baths alike.
Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Where
- Old Sarum (SP4)
- Region
- Wiltshire
- Cover
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Also near Old Sarum
More services for Old Sarum
Keeping it looking good
Good habits make a big difference to how long a repair lasts:
- Dry the bath after use to stop limescale
- Do not leave a chip unrepaired
- Do not use the bath until it has fully cured
- Do not leave bottles, razors or sponges standing on the surface
A quick rinse and wipe after use helps, especially in hard water areas, so limescale can’t build up.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further.
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams in Wiltshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
When we would advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Damage hidden under a previous coating, until it’s stripped back
- Acrylic that moves when you stand in it
- A metal bath with a through crack
Send us pictures and we will tell you honestly.
Surfaces we repair
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
Questions from Old Sarum
When can you do it?
It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.
Can you redo someone else’s repair?
Generally, yes. Let us know what was used before and we will plan for it.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
What happens if you find more damage?
The price is fixed for what the photos show. If there’s more, we’ll tell you before starting.
What happens next?
We come back with a fixed price, generally with dates to choose from. You are under no obligation.
What does bath re-enamelling cost?
Resurfacing from £350. We give a fixed price from your photos. Send a close-up of the damage and a wider photo with your SP4 postcode.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Prices and what affects them
Resurfacing from £350. We give every job a fixed price from photos. This is what makes a difference:
- How many areas need work
- Unusual colours or finishes
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
We don’t add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from photos
A couple of clear pictures is all it takes. It helps if you send:
- Any details about the material
- One picture of the entire bath
- Daylight if possible, and no flash reflection
- A coin or ruler next to the damage for scale
Email us pictures of the damage and one of the entire item, with your SP4 postcode, and we’ll reply with a fixed price.
What your bath is made of matters
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Where we work around Old Sarum
Old Sarum is about 2 miles north of Salisbury, in Wiltshire. We visit clients in Old Sarum, so there is no workshop to go to. Old Sarum is one of 425 towns and villages in Wiltshire we cover. Our jobs stretch from Old Sarum to London (78 miles away).
Our visits in SP4 work the same way as everywhere else we cover. You will find streets such as Beauchamp Proctor Rise, Mannock Field and Barker Close, and we cover them all. Neighbouring places we cover include Winterbourne Earls (1 mile east), Winterbourne Dauntsey (2 miles east), Winterbourne Gunner (2 miles north-east), Gomeldon (3 miles east) and Porton (3 miles north-east). We also work in nearby towns such as Amesbury (4 miles north), Bugmore (3 miles south), Milford (3 miles south), Harnham (3 miles south), Bulford (6 miles north) and Bemerton (3 miles south-west).
Local landmarks in Old Sarum
We visit homes around Old Sarum Primary School and St Joseph's Catholic School, among other places. The nearest railway station is Salisbury station, about 2.5 miles south of the centre. A little further out are Harvard Hospital (3.6 miles south) and Old Sarum Castle (1.1 miles south-west). For a walk, there is Harnham Hill.
- Other local spots include Salisbury (2.7 miles south)
What happens on the day
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job normally takes most of the day. We tidy up before we leave and let you know when you can use it again.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the day after.
Preparing for the visit
- Let us know which floor the room is on
- Mention any parking restrictions or tricky access
- Plan for the room to be out of bounds to pets and children
Ask for a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
