North Yorkshire · England
Bath re-enamelling & resurfacing in Colton Lane End, North Yorkshire
Full bath re-enamelling and resurfacing in Colton Lane End, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- Lots of chips and rust spots
What we do, step by step
We begin by going over the job with you. After that, protection goes down around the work area and we start. You can expect it to take most of the day, and we will keep you posted as we go.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the day after, the bath is ready.
Getting ready for the visit
- Keep children and pets away from the room on the day
- Mention any earlier repairs or resurfacing
- Have somewhere for us to park nearby if possible
Ask for a price
For a price in Colton Lane End, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Advice
About our bath re-enamelling in Colton Lane End
When a bath is structurally fine but worn out on the surface, re-enamelling is normally the most cost-effective option. It avoids removal, plumbing and re-tiling. If you are dealing with worn patches where water runs and sits and a coloured bath you want in white, we can normally put it right, on acrylic baths, pressed steel baths and Victorian roll-tops alike.
All of our repairs are guaranteed for twelve months in Colton Lane End and everywhere else. If something goes wrong with the work, we come back.
- Where
- Colton Lane End (LS24)
- Area hub
- North Yorkshire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Towns and villages near Colton Lane End
More services for Colton Lane End
Should you replace it?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Our bath re-enamelling starts from £350. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why us?
- Straight answers about what a repair can do
- Usually one visit, start to finish
- Colours mixed by hand to suit your surface
- Nothing taken out or refitted
Read our full price list and resurfacing vs replacement cost guide.
Common problems we fix in Colton Lane End
Older baths often have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
If you can see any of these, send us a picture:
- A dull, rough surface that won’t come clean
- Several chips and rust patches
- Worn patches where water runs and sits
- A peeling or bubbling previous coating
Before you book anyone
- What the guarantee covers, and for how long
- Whether the price covers travel
- Who will actually do the work
- When it can be used again
Aftercare tips
Nothing complicated is needed:
- Wipe the bath dry after use in hard water areas
- Store bottles off the bath
- Rinse off hair dye, oils and bath bombs straight away
- Fix dripping taps quickly
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.
Colton Lane End and the surrounding area
Colton Lane End is about 6 miles south-west of York, in North Yorkshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in 626 places in North Yorkshire. Our nearest city page is Leeds, about 16 miles away.
Postcode districts we cover here: LS24. Other places close to Colton Lane End include Bilbrough (1 mile north), Askham Richard (1 mile north), Askham Bryan (2 miles north-east), Copmanthorpe (2 miles north-east) and Acomb Park (3 miles north-east). Within a short drive, we also cover Knaresborough (13 miles north-west), Selby (10 miles south-east), Tadcaster (4 miles south-west), Starbeck (14 miles north-west), Easingwold (15 miles north) and Boroughbridge (15 miles north-west).
Around Colton Lane End
Our clients here include homes close to Ye Olde Sun Inne pub, Boroughbridge High School and Church of St James. The closest station to Colton Lane End is Ulleskelf station, about 3.7 miles south of the centre. Nearby you’ll also find Kyme Castle (4.3 miles west) and The Ark Museum (3.3 miles south-west).
- Parks and local facilities nearby include Bishopthorpe Rural District (3 miles south-east)
Colton Lane End questions
Can pets and children be at home?
Yes, as long as they stay out of the room we are working in. We will let you know when it’s safe to use again.
Do you cover Colton Lane End?
Yes. We work across the UK and come to Colton Lane End and the rest of North Yorkshire. Send pictures and we’ll quote, or call 0345 017 0787.
When can you do it?
It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.
How do I book?
Photos of the damage, a picture of the whole bath and your postcode. After that, we just agree a date.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Can you fix a peeling bath coating?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Can you change the colour of my bath?
Yes, white is the usual choice. Mention the colour you want when you send pictures.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
Can I fix it myself?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
What a repair can’t fix
A repair is not always the answer, and we’ll tell you before we start. Repairs will not solve:
- A bath split right through the body
- Holes rusted through the metal
- An acrylic bath that flexes badly underfoot
If in doubt, send photos and we will say what we think.
Materials we work on in Colton Lane End
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
What bath re-enamelling costs
Resurfacing from £350. We give every job a fixed price from pictures. These are the things that affect it:
- Previous DIY repairs that have to come out
- Where the damage is and how we get to it
- The colour and finish to match
- The material and finish
Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it.
Quotes from your photos
Good pictures mean an accurate price. Here’s what helps:
- Something in shot to show the size
- One sharp close-up of the damage
- A wider photo showing the whole bath
- Where you are, by postcode
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
About our accreditations · Every repair comes with a one-year guarantee.
