Worcestershire · England
Bath Re-enamelling for Wyche homes
Full bath re-enamelling and resurfacing for homes and businesses in Wyche and across Worcestershire. Free, fixed quotes from your photos.
- Resurfacing from £350
- A coating lifting around the plughole
- A bath that stays dull however much you clean it
What bath re-enamelling costs
Resurfacing from £350. We give every job a fixed price from pictures. These are the things that affect it:
- Whether we combine several jobs
- Unusual colours or finishes
- Whether it’s a chip, crack, burn or wear
- Where the damage is and how we get to it
Compared with replacing, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Send pictures for a quote
Almost every job we do is priced from pictures. This is what to send:
- A wider photo showing the whole bath
- Daylight if possible, and no flash reflection
- A coin or ruler next to the damage for scale
- A clear, close picture of the problem area
If you’re in Wyche and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Bath re-enamelling at your home in Wyche
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. Whether it’s enamel that’s lost its shine and feels rough and a period or roll-top bath worth keeping, we can help.
A one-year guarantee comes as standard, so you are covered after the visit.
- Location
- Wyche (WR14, WR13)
- Area hub
- Worcestershire
- Guarantee
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What else we do in Wyche
Questions from Wyche
What happens if you find more damage?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
Is it worth repairing rather than replacing?
Normally, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
What happens after I send photos?
We come back with a fixed price. You are under no obligation.
How do I get a price for bath re-enamelling in Wyche?
Resurfacing from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
Is there any odour?
Some materials have a smell while they’re applied, so we ventilate the room. It fades as everything cures.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Can you fix a peeling bath coating?
Normally, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Will the bath be moved?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
How to look after the repair
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Don’t let dyes or oils sit on the finish
- Get any chip repaired quickly
- Keep suction mats out of the bath
- Keep toiletries on a shelf rather than in the bath
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
How the visit works
Your technician turns up when we said we would and checks the damage against your pictures first. The floor and nearby surfaces are covered before we open a single tin. Most visits take a full day, and we leave the room as we found it.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s usually ready the following day.
Preparing for the visit
- Point us to the nearest place to park
- Mention if the room is upstairs or in a flat
- Let us know about parking or access
How to get a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Related advice
What a repair can’t fix
We will not take on work that will not last, so these are the limits:
- Steel that has corroded right through
- Acrylic that moves when you stand in it
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
Signs you need bath re-enamelling in Wyche
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
Send us a photo if you notice any of these:
- A period or roll-top bath worth keeping
- A bath that stays dull however much you clean it
- An old resurfacing that’s failing
- Several chips and rust patches
What your quote should include
- How the colour is matched
- How soon you can use it again
- How the room is protected while they work
- Who will actually do the work
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
For landlords and businesses
For anyone letting property in or around Wyche, we can repair and quote for several addresses together. Just send pictures for each address and we will price them together.
We are used to working with agents and managing companies. Just send pictures, the address and how to get access.
What your bath is made of matters
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
Our work in Wyche
Wyche is about 1 mile south-west of Malvern, in Worcestershire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. We cover 376 places across Worcestershire. We work right across the region, from Wyche to Birmingham (32 miles away).
Here we cover the WR14 and WR13 postcode area. We regularly work on streets such as Wells Road, Eaton Road and Wyche Road and the roads around them. Other places close to Wyche include Upper Colwall (1 mile south-west), Malvern Wells (1 mile south), Colwall Stone (1 mile south-west), Upper Welland (2 miles south) and Evendine (2 miles south-west). Further out, we also cover Worcester (9 miles north-east), Droitwich Spa (14 miles north-east), Pershore (11 miles east), Warndon (10 miles north-east), Rainbow Hill (9 miles north-east) and St Peter the Great (7 miles north-east).
What’s near Wyche
We visit homes around Malvern Wyche CofE Primary School, The Downs and The Chase and the streets around them. Wyche’s nearest station is Great Malvern station, roughly 1.3 miles north-east. A little further out are British Camp (2.6 miles south) and Malvern Museum of Local History (1.2 miles north). The countryside around Wyche includes Brotheridge Green Nature Reserve and Worcestershire Beacon.
About our accreditations · Every repair comes with a one-year guarantee.
