Staffordshire · England
Bath re-enamelling & resurfacing in Consall, Staffordshire
Bath re-enamelling in Consall without the cost of replacing. Send us photos for a fixed quote, then we come to you.
- Resurfacing from £350
- Chips and rust in more than one place
- Worn patches where water runs and sits
Work for landlords and builders
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access.
Bath re-enamelling in Consall, done in place
We don’t move the bath, so your taps, tiles and plumbing are left alone. It usually takes one visit, and can be used again the next day. We work on cast iron baths, pressed steel baths and acrylic baths, and people most frequently call us about lots of chips and rust spots and a bath in a colour that no longer suits.
We stand behind the work with a one-year guarantee, so you’re not left on your own once we have gone.
- Where
- Consall (ST9)
- Area hub
- Staffordshire
- Guarantee
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What happens on the day
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes most of the day. If anything looks different from your photos, we’ll talk to you before going ahead.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Avoid using the area for a few hours before we arrive
- Point us to the nearest place to park
- Let us know about parking or access
Getting a price
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Advice
Keeping it looking good
How the surface is treated afterwards matters. Here’s what we suggest:
- Wash away dyes and oils after use
- Do not leave a chip unrepaired
- Keep suction mats out of the bath
- Leave the bath for the full curing time before using it
A quick rinse and wipe after use helps, particularly where water is hard, so limescale can’t build up.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Common questions in Consall
Will the new finish last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Can you re-enamel a roll-top bath?
Yes. Inside and out.
How much does bath re-enamelling cost in Consall?
Prices start from £350. Every job gets a fixed quote based on photos of the damage. Send a close-up and a photo of the entire item and your postcode.
How long is the bath unusable?
Most baths are done in a day, ready the next day. We’ll confirm timings when we quote.
What if the damage is worse than the photos show?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
Can a failed resurfacing be redone?
Generally, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
What do you need from me?
Just pictures, your postcode and a contact number. On the day, access to the room.
Is it safe with children and pets around?
Just keep them out of the work area. We will let you know when it’s safe to use again.
About Consall
Consall is about 4 miles north-west of Cheadle, in Staffordshire. Book a date that suits you, and we will give you an arrival time in advance, so you’re not left waiting in all day. We work in all 512 towns and villages in Staffordshire, from the larger towns to small villages. You can also see our page for Manchester, about 31 miles away.
Jobs in ST9 are booked in the same way as anywhere else. We also cover the places around Consall: Wetley Rocks (1 mile north-west), Blakeley Lane (1 mile south), Cellarhead (1 mile south-west), Kingsley Moor (1 mile south-east) and Cheddleton (2 miles north). We also work in nearby towns such as Newcastle-under-Lyme (8 miles west), Longton (5 miles south-west), Stone (11 miles south-west), Leek (5 miles north), Biddulph (8 miles north-west) and Alsager (12 miles west).
Near you in Consall
In Consall, that means homes near Church of St John the Baptist, St John's CofE (C) Primary School and Moorside High School, among other places. The closest station to Consall is Blythe Bridge station, roughly 4.8 miles south of the centre. Other landmarks nearby include St Edward's Hospital (3.2 miles north) and Nursing History Museum (3.1 miles north). Open spaces near Consall include Coombes Valley RSPB reserve.
Do you need bath re-enamelling in Consall?
Enamel doesn’t fail overnight. Years of cleaning, hard water and hot baths wear the gloss away, starting where water runs and sits.
Clients generally contact us about:
- A coloured bath you want in white
- A period or roll-top bath worth keeping
- A coating lifting around the plughole
- A bath that stays dull however much you clean it
Comparing quotes
- How your room will be protected
- If travel is included in the price
- How the colour is matched
- What happens if they find more damage
What a repair cannot fix
Not everything can be repaired, and we would rather say so up front. Repairs will not solve:
- A cast iron or steel bath that’s cracked right through
- A bath that’s rusted through
- Problems we cannot see until an old finish comes off
Send us pictures and we’ll tell you honestly.
What we work on
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
Repair or replace in Consall?
A new bath means a plumber, lifting out the old bath, making good the walls and tiles and several days without a working bathroom. Re-enamelling gives the bath a new finish without moving it. Prices start from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
What you get with us
- Most jobs done in one visit
- Fixed prices from your photos
- Everything repaired in place
- No extra charge for your area
Read our pricing and guide to resurfacing and replacement costs.
Other services in Consall
How we price bath re-enamelling
Resurfacing from £350. Prices are worked out job by job, from your photos. What matters most is:
- Access to the area
- How many areas need work
- The material
- The type of damage
Our prices are the same across the UK, with no extra for Consall. The job itself decides the price: the material, the amount of damage and how many items.
How to get a fixed price
You can normally get a fixed price without us visiting. To help us price it:
- Good light, ideally daylight, without flash glare
- A coin beside the damage so we can judge size
- A close-up of the damage, in focus
- What it’s made of, if you know
You do not need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
About our accreditations · Every repair comes with a one-year guarantee.
