Staffordshire · England

Bath re-enamelling & resurfacing in Werrington, Staffordshire

Bath re-enamelling across Werrington and nearby, done in a single visit in most cases and guaranteed for a year.

  • Resurfacing from £350
  • Lots of chips and rust spots
  • A bath in a colour that no longer suits
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Werrington homes

How the visit works

There’s not much you need to do on the day. Show us the job, point us to the room, and we’ll get on with it. Most visits take the best part of a day.

  1. The bathroom is protected and ventilation set up.
  2. We remove the old silicone and deep clean the bath.
  3. Chips, rust and pitting are repaired.
  4. The surface is keyed and primed for the new finish.
  5. The new finish is sprayed on in several coats and left to cure.

How to prepare

  • Have somewhere for us to park nearby if possible
  • Clear toiletries, mats and anything else from around the area
  • Tell us about parking, stairs or access

Get a quote

To get a price, send two or three photos through our quote form or call us. We’ll tell you honestly if a repair is the right fix.

Get a free quote

Read more

How we handle bath re-enamelling in Werrington

Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. We are often asked to fix an old resurfacing that’s failing and brown or grey marks that don’t clean off, on basins & shower trays, Victorian roll-tops and pressed steel baths.

All our work comes with a one-year guarantee.

Basin with yellowed glaze resurfaced to a clean white finish
Where
Werrington (ST9, ST2)
County
Staffordshire
Warranty
12 months on all our work
Quotes
From £350. Free and fixed, from your pictures
Telephone
0345 017 0787
Page updated
23 October 2026

Different materials, different repairs

Roll-top and period baths

Freestanding roll-tops can be done inside and out, and the outside can be refinished too.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.

When to call us in Werrington

By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.

Look out for these signs:

  • An original cast iron bath that needs restoring
  • A peeling or bubbling previous coating
  • Chips and rust in more than one place
  • Wear marks under the taps

Comparing quotes

  • The length of the guarantee and what it covers
  • Whether the price covers travel
  • What aftercare is recommended
  • What preparation is included

Our hiring checklist

Where we work around Werrington

Werrington is about 3 miles east of Stoke-on-Trent, in Staffordshire. Book a date that suits you, and we will give you an arrival time in advance, so you are not left waiting in all day. Werrington is one of 512 places in Staffordshire where we work. Our nearest city page is Manchester, about 32 miles away.

All of ST9 and ST2 is within our area. You will find streets such as Brentwood Grove, Whitmore Avenue and Scholars Way, all of which we cover. Close by, we cover Armshead (1 mile north), Cellarhead (1 mile east), Wetley Rocks (2 miles north-east), Tompkin (2 miles north) and Blakeley Lane (2 miles east). Further out, we also cover Stafford (15 miles south), Newcastle-under-Lyme (6 miles west), Longton (3 miles south-west), Stone (9 miles south), Leek (6 miles north-east) and Biddulph (7 miles north-west).

Around Werrington

Our clients here include homes close to St Philip, Moorside High School and Werrington Primary School. The closest station to Werrington is Longton station, about 3 miles south-west of the centre. Well-known places in the area include The Potteries Centre (3.4 miles west) and Abbey Green (2.1 miles north-west).

Map of Werrington © OpenStreetMap contributors

Keeping it looking good

So the finish stays in good condition:

  • A quick wipe after use keeps limescale away
  • Respect the curing time we give you
  • Rinse off hair dye, oils and bath bombs immediately
  • Have chips seen to early

Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.

Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.

When we’d advise against a repair

We won’t take on work that will not last, so these are the limits:

  • A cast iron or steel bath that is cracked right through
  • Anything hidden under an old coating, until we remove it
  • Leaking taps or wastes (a plumber’s job)

Send us pictures and we’ll tell you honestly.

What we work on

  • Victorian roll-tops
  • Cast iron baths
  • Pressed steel baths
  • Acrylic baths
  • Basins & shower trays

Questions from Werrington

Are you accredited?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

What do you need from me?

A close-up, a wider photo and your postcode. After that, we just agree a date.

Do you come to Werrington?

Yes, we do. Technicians travel to Werrington from across the region, and the price is the same as everywhere else.

What happens once I’ve sent pictures?

We look at the pictures and reply with a fixed quote and some dates. If we need another angle, we will ask.

Can you make a coloured bath white?

Yes, most people go for white. Tell us what you’d like when you ask for a quote.

Is a repair better than a new one?

In most cases, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.

Will the new finish last?

Look after it and it lasts. Avoid abrasive cleaners and suction mats.

Can I add another job to the visit?

Of course, and it generally saves money. Send pictures of everything together and you will get one combined price.

Prices and what affects them

Prices start from £350. We give every job a fixed quote from photos. These are the things that affect it:

  • Unusual colours or finishes
  • Whether it’s a chip, crack, burn or wear
  • How much damage there is
  • Whether we combine several jobs

No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.

Send pictures for a quote

We price nearly every job from photos. This is what to send:

  • One sharp close-up of the damage
  • Details of any past repairs
  • A wider photo showing the whole bath
  • Your postcode, so we can check dates

There’s no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.

Work for landlords and builders

We carry out planned and one-off repairs for housing associations and facilities teams in Staffordshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

Can I fix it myself?

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.