Dorset · England
Bath Re-enamelling in Corfe Castle
Bath re-enamelling across Corfe Castle and nearby, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- Lots of chips and rust spots
For landlords and businesses
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access.
Bath re-enamelling in Corfe Castle, done in place
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Common call-outs are for a dull, rough surface that won’t come clean and brown or grey marks that don’t clean off, in pressed steel baths, basins & shower trays and Victorian roll-tops.
Every repair is covered by a one-year guarantee.
- Area
- Corfe Castle (BH20)
- Area hub
- Dorset
- Guarantee
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Nearby places to Corfe Castle
Other services in Corfe Castle
When a repair isn’t the answer
We’d rather lose a job than do one that will not last, so here’s what a repair can’t put right:
- An acrylic bath that flexes badly underfoot
- Leaks from fittings rather than the bath
- Steel that has corroded right through
Send us pictures and we will tell you honestly.
Materials we repair
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
Repairing versus replacing in Corfe Castle
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing generally wins. Resurfacing from £350, with every job priced individually. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why Corfe Castle clients choose us
- Work done at your home or business
- One-year guarantee on every repair
- One price list for the entire UK
- Rooms protected and left tidy
See our pricing and guide to resurfacing and replacement costs.
What bath re-enamelling costs
Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:
- How easy the damage is to reach
- What the surface is made of
- What kind of damage it is
- Unusual colours or finishes
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Send pictures for a quote
The better the pictures, the more accurate the price. Here’s what helps:
- Natural light rather than flash
- A picture taken from further back
- What it’s made of, if you know
- Whether it’s been repaired or coated before
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
How the visit works
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job typically takes the best part of a day. We tidy up before we leave and let you know when you can use it again.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- Once cured, normally by the following day, the bath is ready.
Before we arrive
- Let the surface dry out before the visit
- Open a window if you can
- Mention any parking restrictions or tricky access
Ask for a price
There is no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Related advice
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Keeping it looking good
Much of the damage we repair could have been avoided. These habits help:
- Keep toiletries on a shelf rather than in the bath
- A quick wipe after use keeps limescale away
- Do not use the bath until it has fully cured
- Wash away dyes and oils after use
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
Corfe Castle: your questions answered
Which areas do you work in?
Everywhere in the UK, Corfe Castle included. There’s no extra charge for travel.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
Does the bath have to be removed?
No. We resurface it in place, so the tiles and taps stay put.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Is there any odour?
Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.
How long will the bath be out of use?
One day for most baths, ready the day after. We’ll confirm timings when we quote.
What happens if you find more damage?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
Can you do the outside of a roll-top?
Yes. Inside and out.
Our work in Corfe Castle
Corfe Castle is about 8 miles south-west of Poole, in Dorset. Whether you are in the middle of Corfe Castle or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. We work in all 462 towns and villages in Dorset, from the larger towns to small villages.
Jobs in BH20 work the same way as everywhere else we cover. From Higher Gardens, The Dollings and Mead Road or anywhere nearby, a technician can come to you. Close by, we cover Little Woolgarston (1 mile east), Church Knowle (1 mile west), Kingston (1 mile south), Woolgarston (1 mile east) and Norden (2 miles north-west). Further out, we also cover Christchurch (15 miles north-east), Wimborne Minster (12 miles north), Ferndown (14 miles north-east), Broadstone (9 miles north), Corfe Mullen (10 miles north) and Swanage (4 miles south-east).
What’s near Corfe Castle
Around Corfe Castle, we work in homes near Parish Church of Saint Edward, Corfe Castle Church of England Primary School and The Castle Inn and the streets around them. The closest station to Corfe Castle is Wareham station, about 4.9 miles north-west. Other landmarks nearby include Arne (3.9 miles north-west) and Corfe Castle Museum (under half a mile north-west). Not far away are Arne RSPB reserve and Blue Pool.
About our accreditations · Every repair comes with a one-year guarantee.
