Dorset · England
Bath re-enamelling & resurfacing in Kingston, Dorset
Bath re-enamelling for Kingston, without a refit. Get a fixed quote from your pictures, then book a visit.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Staining under the taps and around the waste
For landlords and businesses
For anyone letting property in or around Kingston, we’ll quote for several properties at once. Just send pictures for each address and we will price them together.
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
About our bath re-enamelling in Kingston
We do not move the bath, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, with the bath ready to use the following day. We work on acrylic baths, basins & shower trays and pressed steel baths, and people most frequently call us about a coloured bath you want in white and a bath that stays dull however much you clean it.
Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Area
- Kingston (BH20)
- Area hub
- Dorset
- Warranty
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
When to call us in Kingston
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Resurfacing sorts them out together.
The things customers usually mention when they call include:
- Several chips and rust patches
- A roll-top that is seen better days
- Stains that will not shift
- A dull, rough surface that won’t come clean
Comparing quotes
- The length of the guarantee and what it covers
- Whether the price covers travel
- How the room is protected while they work
- How changes to the job are handled
How we price bath re-enamelling
Resurfacing from £350. There are no hourly rates or hidden extras. The price is based on:
- The size and number of damaged areas
- Whether it’s a chip, crack, burn or wear
- How easy the damage is to reach
- The colour and finish to match
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Quotes from your photos
Good photos mean an accurate price. Here’s what we find most useful:
- Where you are, by postcode
- A photo taken from further back
- A clear, close picture of the problem area
- Details of any past repairs
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.
Kingston questions
Can you repair several things at once?
Yes, and it’s frequently cheaper. Just add the extra items to your pictures and you will get one combined price.
Is there a call-out fee?
There is no separate call-out charge. Your fixed quote includes everything.
Will the price change on the day?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
Is the work guaranteed?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Can you repair something that is been repaired before?
Generally, yes. Tell us what was done before.
Can you make a coloured bath white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Which areas do you work in?
Across the UK, so Kingston is covered. Prices do not change with location.
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
What your bath is made of matters
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we pay close attention there.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
About Kingston
Kingston is about 9 miles south-west of Poole, in Dorset. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover all 462 towns and villages in Dorset, from the larger towns to small villages.
Here we cover the BH20 postcode area. From West Street, The Lane and South Street or a nearby road, a technician can come to you. We also cover the places around Kingston: Corfe Castle (1 mile north), Church Knowle (2 miles north-west), Little Woolgarston (2 miles north-east), Harman's Cross (2 miles east) and Woolgarston (2 miles north-east). Further out, we also cover Wimborne Minster (13 miles north), Ferndown (15 miles north-east), Broadstone (10 miles north), Corfe Mullen (11 miles north), Swanage (4 miles east) and Portfield (15 miles north-east).
Near you in Kingston
In Kingston, that means homes near St James's Church and The Scott Arms. Other landmarks nearby include Wareham Community Hospital (5.4 miles north-west) and Arne (4.7 miles north-west). The countryside around Kingston includes Swyre Head and Arne RSPB reserve.
Repair or replace in Kingston?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. Our prices are the same across the UK, so there’s no premium for Kingston. The job itself decides the price: the material, the amount of damage and how many items.
What you get with us
- Accredited with CHAS, Constructionline and SafeContractor
- One price list for the whole UK
- Honest advice, even when it means no job
- Everything repaired in place
Read our prices page and resurfacing vs replacement cost guide.
Places near Kingston
Other services in Kingston
What a repair cannot fix
We will always be straight with you, so here’s what a repair can’t fix:
- Damage hidden under a previous coating, until it’s stripped back
- Leaking taps or wastes (a plumber’s job)
- An acrylic bath that flexes badly underfoot
If in doubt, send photos and we will say what we think.
Materials we work on in Kingston
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
How the visit works
There is not much you need to do on the day. Let us in and show us the room, and we will get on with it. Most visits take the best part of a day.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the following day.
Preparing for the visit
- Make sure the room can be ventilated
- Keep children and pets away from the room on the day
- Let us know about parking or access
Getting a price
The quickest way to a price is to send two or three photos through our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
Advice
Looking after it afterwards
Much of the damage we repair could have been avoided. These habits help:
- Fix dripping taps quickly
- Stick to gentle, non-abrasive cleaners
- Avoid suction-cup mats
- Wipe the bath dry after use in hard water areas
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
About our accreditations · Every repair comes with a one-year guarantee.
