Stirling · Scotland
Bath Re-enamelling in Broomridge
Fixed-price bath re-enamelling in Broomridge and the surrounding area, typically in one visit and guaranteed for a year.
- Resurfacing from £350
- A bath in a colour that no longer suits
- A dull, rough surface that won’t come clean
Bath re-enamelling in Broomridge without replacing anything
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Our technicians work on basins & shower trays, acrylic baths and cast iron baths, and the jobs we see most are an original cast iron bath that needs restoring and several chips and rust patches.
Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Area
- Broomridge (FK7)
- Area hub
- Stirling
- Warranty
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Where we work around Broomridge
Broomridge is about 2 miles south of Stirling, in Stirling. Wherever you are in the FK7 postcode area, a technician comes to you. Broomridge is one of 55 places in Stirling we cover. You can also see our page for Glasgow, about 21 miles away.
Our repair technicians cover all of the FK7 postcode area and the streets around it. Jobs here include addresses on Whins Road, Milton Road and Bryden Road. You will find Broomridge on the A872, which makes it straightforward to reach. Neighbouring places we cover include Chartershall (1 mile west), Bannockburn (1 mile east), Borestone (1 mile south-west), Dunipace (4 miles south) and Fankerton (5 miles south). We also work in nearby towns such as Dunblane (7 miles north), Raploch (3 miles north), Cornton (3 miles north), Bridge of Allan (4 miles north), Callander (15 miles north-west) and Cowie (3 miles east).
What’s near Broomridge
In Broomridge, that means homes near Bannockburn, among other places. For rail, the closest station is Stirling station, about 2.1 miles north of the centre. Other landmarks nearby include Stirling Castle (2.4 miles north) and Stirling Smith Museum and Art Gallery (2.1 miles north). Green spaces nearby include Gillies Hill and Airthrey Loch.
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Should you replace it?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Tiles, panels and taps stay put. Prices start from £350. Compared with replacing, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why book with us
- Rooms protected and left tidy
- Every repair guaranteed for a year
- Colour mixed on the day to match
- Accredited with CHAS, Constructionline and SafeContractor
Read our prices page or guide to resurfacing and replacement costs.
What we are called out for in Broomridge
Many baths we resurface have simply been well used, and only the surface is worn. Underneath, a cast iron or steel bath is usually as strong as ever.
Clients normally contact us about:
- Thin, worn enamel in places
- Several chips and rust patches
- Staining under the taps and around the waste
- A bath that stays dull however much you clean it
Questions to ask before booking
- The length of the guarantee and what it covers
- How the room is protected while they work
- Whether they match the colour on site
- What preparation is included
What a repair can’t fix
A repair is not always the answer, and we’d rather say so up front. We cannot fix:
- Leaking taps or wastes (a plumber’s job)
- Anything hidden under an old coating, until we remove it
- Acrylic that moves when you stand in it
Send us pictures and we’ll tell you honestly.
What we work on
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Pressed steel baths
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Aftercare tips
How the surface is treated afterwards matters:
- Wipe the bath dry after use in hard water areas
- Store bottles off the bath
- Leave the bath for the full curing time before using it
- Keep suction mats out of the bath
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Broomridge questions
What information do you need?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Can you price it without visiting?
Generally, yes. A close-up and a wider photo are enough to give a fixed price.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Will the bath be moved?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
How do I get a price for bath re-enamelling in Broomridge?
Prices start from £350. Every job gets a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo with your FK7 postcode.
Can you do more than one item on the same visit?
Of course, and it usually saves money. Just add the extra items to your pictures and we’ll quote them together.
Nearby places to Broomridge
Other services in Broomridge
What we do, step by step
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, then carry out the work, which normally takes the best part of a day. If we find something your photos didn’t show, we’ll explain it before carrying on.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Let us know which floor the room is on
- Keep pets and children out of the room while we work
- Mention any earlier repairs or resurfacing
How to get a price
If you’re in Broomridge and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
