Hampshire · England
Bath Re-enamelling in Cottonworth
Full bath re-enamelling and resurfacing for homes and businesses in Cottonworth and across Hampshire. Free, fixed quotes from your pictures.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Brown or grey marks that do not clean off
Bath re-enamelling at your home in Cottonworth
When a bath is structurally fine but worn out on the surface, re-enamelling is normally the most cost-effective option. It avoids removal, plumbing and re-tiling. We are often asked to fix worn patches where water runs and sits and a coloured bath you want in white, across pressed steel baths, Victorian roll-tops and acrylic baths.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.
- Area
- Cottonworth (SP11)
- Area hub
- Hampshire
- Cover
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
How the visit works
There is not much you need to do on the day. Show us the job, point us to the room, and we’ll get on with it. Most visits take most of the day, including clearing up.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Keep pets and children out of the room while we work
- Avoid using the area for a few hours before we arrive
- Mention any earlier repairs or resurfacing
Getting a price
If you are in Cottonworth and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Related advice
Towns and villages near Cottonworth
More services for Cottonworth
Common questions in Cottonworth
Is repairing better than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders in Cottonworth.
Can you price it without visiting?
Nearly always. If pictures don’t show enough, we will ask for another angle.
Is there a call-out fee?
There is no separate call-out charge. Your fixed quote includes everything.
What happens once I’ve sent photos?
We check the damage, the material and your postcode, then reply with a quote.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do you resurface freestanding baths?
Yes. Inside and out if you’d like.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
What bath re-enamelling costs
Resurfacing from £350. A fixed quote means you know the cost before you book. We take into account:
- The type of damage
- The material
- Previous DIY repairs that have to come out
- The size and number of damaged areas
There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed price
Good photos mean an accurate price. Here’s what we find most useful:
- Any details about the material
- Daylight if possible, and no flash reflection
- One sharp close-up of the damage
- A wider photo showing the entire bath
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and you’ll get a fixed price back. Quotes are free and no obligation.
For landlords and businesses
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
If you manage property in Cottonworth, we will quote for several properties at once. Send pictures for each one and we’ll come back with a combined price.
Should you replace it?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why us?
- Colours mixed by hand to suit your surface
- Nothing taken out or refitted
- Straight answers about what a repair can do
- Work done at your home or business
See our prices page and bath cost comparison.
Where we work around Cottonworth
Cottonworth is about 4 miles south of Andover, in Hampshire. Across the SP11 area, we come to you. We cover all 683 towns and villages in Hampshire, from the larger towns to small villages. Our jobs stretch from Cottonworth to London (about 63 miles away).
Here we cover the SP11 postcode area. If you are just outside Cottonworth, we cover Fullerton (1 mile south-west), Chilbolton (1 mile east), Wherwell (1 mile north-east), Wherwell Wood (1 mile north) and Leckford (1 mile south). Further out, we also cover Winchester (9 miles south-east), Eastleigh (14 miles south), Andover (4 miles north), Chandler's Ford (12 miles south), Romsey (11 miles south) and Hyde (9 miles south-east).
Landmarks near Cottonworth
Typical jobs here are in homes near Longstock Park, Abbots Mitre pub and Church of St Mary the Less and the streets around them. The nearest railway station is Andover station, about 4.1 miles north of the centre. A little further out are Andover War Memorial Hospital (4.4 miles north) and Andover Museum (3.8 miles north). Green spaces nearby include Anton Lakes and Mill Lake.
Aftercare tips
Most damage we see is avoidable. These habits help:
- Clean with a soft cloth and mild detergent
- Don’t leave bottles, razors or sponges standing on the surface
- Rinse off hair dye, oils and bath bombs straight away
- Dry the bath after use to stop limescale
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
What a repair cannot fix
Honesty matters more than a booking, so here’s what a repair can’t fix:
- Damage hidden under a previous coating, until it’s stripped back
- Holes rusted through the metal
- A cast iron or steel bath that is cracked right through
Send us photos and we will tell you honestly.
Surfaces we repair
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Acrylic baths
Do you need bath re-enamelling in Cottonworth?
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Signs it’s time to call us include:
- Worn patches where water runs and sits
- A coating lifting around the plughole
- A roll-top that’s seen better days
- Enamel that is lost its shine and feels rough
What your quote should include
- How to care for the finish
- How soon you can use it again
- Whether a trained technician does the job
- Whether the colour is mixed to match
About our accreditations · Every repair comes with a one-year guarantee.
