Hampshire · England
Bath re-enamelling & resurfacing in Wherwell, Hampshire
Bath re-enamelling in Wherwell without the cost of replacing. Get a fixed price from your pictures, then book a visit.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- Thin, worn enamel in places
Bath re-enamelling in Wherwell, done in place
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Doing them in place keeps an original feature. Typical jobs include enamel that’s lost its shine and feels rough and brown or grey marks that don’t clean off, in Victorian roll-tops, pressed steel baths and acrylic baths.
Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Area
- Wherwell (SP11)
- Area hub
- Hampshire
- Cover
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Aftercare tips
After the repair has cured, a few habits help it last:
- Leave the bath for the full curing time before using it
- Don’t leave a chip unrepaired
- Keep suction mats out of the bath
- A dripping tap should be fixed promptly
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Fix dripping taps quickly.
Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.
Honest limits
In fairness, some problems need a different fix:
- An acrylic bath that flexes badly underfoot
- A bath that’s rusted through
- A cast iron or steel bath that is cracked right through
If in doubt, send photos and we will say what we think.
Materials we repair
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
Nearby places to Wherwell
More services for Wherwell
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Wherwell: your questions answered
What happens once I’ve sent photos?
We check the damage, the material and your postcode, then reply with a quote with dates.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Is there a guarantee?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Does the bath have to be removed?
Not at all. Everything is done in your bathroom, with the room masked and ventilated.
Is it worth repairing rather than replacing?
Generally, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.
Do you come to Wherwell?
Yes, we do. Repair technicians travel to Wherwell from across the region, and the price is the same as everywhere else.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Landlord and trade work in Wherwell
We work for landlords, letting agents and housing providers in Wherwell as well as homeowners. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Do you need bath re-enamelling in Wherwell?
Frequently the bath has just had decades of use, with nothing wrong except the surface. Underneath, a cast iron or steel bath is generally as strong as ever.
Keep an eye out for any of the following:
- A roll-top that is seen better days
- An old resurfacing that’s failing
- A coloured bath you want in white
- Enamel that’s lost its shine and feels rough
Comparing quotes
- Who will actually do the work
- What the guarantee covers, and for how long
- Whether the price covers travel
- Whether cleaning and preparation are in the price
Our work in Wherwell
Wherwell is about 3 miles south-east of Andover, in Hampshire. Jobs in Wherwell are booked in like any other job: a fixed price from your pictures, then a visit to do the work. Wherwell is one of 683 towns and villages in Hampshire where we work. We work right across the region, from Wherwell to London (about 63 miles away).
Here we cover the SP11 postcode area. Jobs here include addresses on High Street, Fair Piece and Beech Grove. Other places close to Wherwell include Wherwell Wood (1 mile north-west), Cottonworth (1 mile south-west), Chilbolton (1 mile south), Fullerton (1 mile south-west) and South Harewood (1 mile north-east). Further out, we also cover Winchester (9 miles south-east), Eastleigh (14 miles south), Andover (3 miles north-west), Chandler's Ford (13 miles south), Romsey (12 miles south) and Hyde (9 miles south-east).
Landmarks near Wherwell
Typical jobs here are in homes near Longstock Park, White Lion Public House and Wherwell Primary School. The nearest railway station is Andover station, about 3.7 miles north-west. Nearby you’ll also find Andover Museum (3.3 miles north-west) and Andover War Memorial Hospital (4 miles north-west). The countryside around Wherwell includes Mill Lake and Anton Lakes.
Can I fix it myself?
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
How we price bath re-enamelling
Resurfacing from £350. Prices are worked out job by job. What matters most is:
- Unusual colours or finishes
- Previous DIY repairs that have to come out
- How many items we do on one visit
- The material and finish
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
How to get a fixed price
Most quotes are done from photos alone. To make it quick:
- A close-up of the damage, in focus
- A wider photo showing the whole bath
- The postcode, so we can plan the visit
- A coin or ruler next to the damage for scale
To get a price, send two or three photos using our quote form or ring us. We’ll tell you honestly whether it can be repaired.
The process
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job generally takes the best part of a day. We clean up when we’re done and let you know when you can use it again.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the next day, the bath is ready.
Getting ready for the visit
- Point us to the nearest place to park
- Tell us about parking, stairs or access
- Mention any earlier repairs or resurfacing
Get a quote
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
