Hampshire · England
Bath re-enamelling & resurfacing in Fullerton, Hampshire
Bath re-enamelling for Fullerton, without a refit. Get a fixed price from your pictures, then book a visit.
- Resurfacing from £350
- Wear marks under the taps
- Stains that won’t shift
Materials and what they mean for the repair
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Bath re-enamelling at your home in Fullerton
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. We regularly repair acrylic baths, Victorian roll-tops and cast iron baths, and the jobs we see most are wear marks under the taps and a dull, rough surface that won’t come clean.
All our work is covered by our one-year guarantee, wherever you are in Hampshire.
- Area
- Fullerton (SP11)
- Region
- Hampshire
- Guarantee
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Places near Fullerton
Also in Fullerton
What we do, step by step
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take most of the day. We clean up when we are done and tell you when it’s ready to use.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Open a window if you can
- Clear toiletries, mats and anything else from around the area
- Make sure the area is dry
How to get a price
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and we will reply with a fixed quote. There’s no charge for the quote and no obligation.
Related advice
What affects the price in Fullerton
Prices start from £350. Quotes are free and the price is fixed. What we take into account:
- Where the damage is and how we get to it
- How many areas need work
- Whether we combine several jobs
- The colour and finish to match
There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your photos
The better the photos, the more accurate the price. Here’s what we find most useful:
- A wider photo showing the entire bath
- Something in shot to show the size
- What it’s made of, if you know
- Your postcode, so we can check dates
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
About Fullerton
Fullerton is about 4 miles south of Andover, in Hampshire. From the centre of Fullerton to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Fullerton is one of 683 places in Hampshire we cover. Our nearest city page is London, about 64 miles away.
We work across the SP11 postcode area and the streets around it. Close by, we cover Cottonworth (1 mile north-east), Chilbolton (1 mile east), Leckford (1 mile south), Wherwell (1 mile north-east) and Wherwell Wood (2 miles north). We also work in nearby towns such as Winchester (9 miles south-east), Eastleigh (14 miles south), Andover (4 miles north), Chandler's Ford (12 miles south), Romsey (11 miles south) and Hyde (9 miles south-east).
Around Fullerton
Typical jobs here are in homes near Church of St Nicholas and Longstock Park, among other places. The nearest railway station is Andover station, about 4.3 miles north. A little further out are Andover War Memorial Hospital (4.6 miles north). The countryside around Fullerton includes Anton Lakes and Mill Lake.
Honest limits
Honesty matters more than a booking, so here’s what a repair can’t fix:
- Anything hidden under an old coating, until we remove it
- A poorly supported acrylic bath, until it’s firmed up
- A cast iron or steel bath that is cracked right through
If in doubt, send photos and we’ll say what we think before you book.
What we work on
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Basins & shower trays
Signs you need bath re-enamelling in Fullerton
Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Keep an eye out for any of the following:
- Staining under the taps and around the waste
- Lots of chips and rust spots
- A bath that stays dull however much you clean it
- Worn patches where water runs and sits
Questions to ask before you book
- What the guarantee covers, and for how long
- How long it needs to cure
- Whether a trained technician does the job
- What happens if the damage is worse than the photos show
FAQs for Fullerton
Do the materials smell?
Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.
What happens once I’ve sent photos?
We review the pictures and send a fixed quote.
When can you do it?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Can you make a coloured bath white?
Yes, most people go for white. Mention the colour you want when you send photos.
Are there extra charges for Fullerton?
We do not add a call-out fee. The fixed quote covers the visit and the work.
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Do you cover the whole of Hampshire?
All of Hampshire, and the rest of the UK. There is no extra charge for travel.
Aftercare tips
Looking after the surface is easy:
- A dripping tap should be fixed promptly
- Leave the bath for the full curing time before using it
- Wipe the bath dry after use in hard water areas
- Stick to gentle, non-abrasive cleaners
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale can’t build up.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. It’s simpler to resurface before they spread.
DIY kit or professional repair?
A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Work for landlords and builders
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
We carry out planned and one-off repairs for housing associations and facilities teams in Hampshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
About our accreditations · Every repair comes with a one-year guarantee.
