Windsor and Maidenhead · England
Bath re-enamelling & resurfacing in Cranbourne, Windsor and Maidenhead
Fixed-price bath re-enamelling in Cranbourne and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Brown or grey marks that do not clean off
How it works
We turn up when we said we would, introduces themselves and checks the damage against your photos first. Dust sheets and masking tape go down before we open a single tin. The work itself takes a full day, and we leave the room as we found it.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can typically be used the next day.
How to prepare
- Let the surface dry out before the visit
- Mention any parking restrictions or tricky access
- Tell us if there are stairs or a lift
Get a quote
To get a price, send a couple of pictures through our quote form or call us. We’ll tell you honestly if a repair is the right fix.
Advice
Bath re-enamelling at your home in Cranbourne
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. Whether it’s a coloured bath you want in white and an old resurfacing that’s failing, we can help.
Every repair is covered by our one-year guarantee.
- Area
- Cranbourne (SL4)
- Area hub
- Windsor and Maidenhead
- Cover
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Keeping it looking good
Most damage we see is avoidable. These habits help:
- Get any chip repaired quickly
- Do not leave bottles, razors or sponges standing on the surface
- Avoid suction-cup mats
- Clean with a soft cloth and mild detergent
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Nearby places to Cranbourne
Also in Cranbourne
Cranbourne: your questions answered
Is there a guarantee?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
Will the price change on the day?
The price is fixed for what the photos show. If there’s more, we will tell you before starting.
Can you fix a peeling bath coating?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Do you work for landlords and businesses?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Can you price it without visiting?
In nearly every case. If pictures don’t show enough, we will ask for another angle.
Will there be a smell?
Expect a mild smell while we’re working that clears as it cures.
How do I book?
Use the quote form or ring 0345 017 0787.
Can you redo someone else’s repair?
Generally, yes. Let us know what was used before and we will plan for it.
Our work in Cranbourne
Cranbourne is about 3 miles south-west of Windsor, in Windsor and Maidenhead. We travel to clients in Cranbourne, so you don’t need to take anything anywhere. Our technicians cover all 57 towns and villages across Windsor and Maidenhead. Our nearest city page is London, about 25 miles away.
Our repair technicians cover all of SL4. You’ll find streets such as Broadway, Berkeley Drive and Central Way. Close by, we cover Plaistow Green (1 mile south), Woodside (1 mile south), The Village (1 mile east), Winkfield (1 mile west) and Brookside (2 miles south). Within a short drive, we also cover Maidenhead (6 miles north-west), Windsor (3 miles north-east), Boyn Hill (5 miles north-west), Cookham (8 miles north), Furze Platt (7 miles north-west) and Broomhall (4 miles south).
Around Cranbourne
Our clients here include homes close to Church of St Peter, Windsor Girls' School and The Fleur de Lis pub. For rail, the closest station is Ascot station, roughly 3 miles south of the centre. Nearby you will also find Heatherwood Hospital (2.8 miles south) and Windsor Castle (3.7 miles north-east). For a walk, there’s Bray Pit and Virginia Water Lake.
Prices and what affects them
Resurfacing from £350. You won’t pay by the hour. The price is based on:
- The size and number of damaged areas
- How hard the colour is to match
- Previous DIY repairs that have to come out
- Whether we combine several jobs
Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it.
Getting a price from photos
Two or three clear pictures are typically enough. Try to include:
- Daylight if possible, and no flash reflection
- Any earlier repairs or coatings
- One picture of the entire bath
- The material, if you know it
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Why repair rather than replace?
If the bath is sound, re-enamelling is typically much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Prices start from £350. There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- Dust sheets down, tidy finish
- Colours mixed by hand to suit your surface
- No need to remove anything
- Repair technicians who travel to you, UK-wide
Take a look at our pricing and guide to resurfacing and replacement costs.
DIY kit or professional repair?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
If you are set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it fails, we can still put it right.
Common problems we fix in Cranbourne
Enamel does not fail overnight. Years of cleaning, hard water and hot baths wear the gloss away, starting where water runs and sits.
It’s worth getting a quote if you see:
- An old resurfacing that’s failing
- An outdated colour you’d like to change
- A period or roll-top bath worth keeping
- Enamel that is lost its shine and feels rough
What your quote should include
- What happens if they find more damage
- Who turns up on the day
- How long the guarantee is and what it covers
- Whether the colour is mixed to match
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
For landlords and businesses
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
About our accreditations · Every repair comes with a one-year guarantee.
