West Sussex · England

Bath re-enamelling & resurfacing in Crawley Down, West Sussex

Bath re-enamelling in and around Crawley Down: photo quotes, tidy work and a year’s guarantee.

  • Resurfacing from £350
  • Lots of chips and rust spots
  • Wear marks under the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Crawley Down

Honest limits

Honesty matters more than a booking, so here’s what a repair cannot fix:

  • Problems we can’t see until an old finish comes off
  • A poorly supported acrylic bath, until it’s firmed up
  • Holes rusted through the metal

If in doubt, send pictures and we’ll say what we think before you book.

Materials we work on in Crawley Down

  • Victorian roll-tops
  • Acrylic baths
  • Cast iron baths
  • Pressed steel baths
  • Basins & shower trays

About our bath re-enamelling in Crawley Down

We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Typical jobs include chips and rust in more than one place and an outdated colour you’d like to change, on acrylic baths, pressed steel baths and cast iron baths.

You are covered for a year from the day of the repair. Just call us if there is a problem and we’ll come back.

Basin with yellowed glaze resurfaced to a clean white finish
Where
Crawley Down (RH10)
Area hub
West Sussex
Cover
12 months on all our work
Price
From £350. Free and fixed, from your photos
Telephone
0345 017 0787
Page updated
23 October 2026

Should I try a DIY kit first?

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.

Covering Crawley Down

Crawley Down is about 3 miles west of East Grinstead, in West Sussex. We visit customers in Crawley Down and nearby villages, so you don’t need to take anything anywhere. We work in 371 places in West Sussex, from the larger towns to small villages. Our jobs stretch from Crawley Down to London (about 26 miles away).

Postcode districts we cover here: RH10. Whether you live on Station Road, Forest Close and Burleigh Way or a nearby road, we can come to you. Other places close to Crawley Down include Furnace Wood (1 mile north), Snow Hill (1 mile north), Turners Hill (1 mile south), Domewood (1 mile north) and Felbridge (2 miles north-east). Larger places within reach include Crawley (5 miles west), Horsham (11 miles west), Haywards Heath (9 miles south), Burgess Hill (12 miles south), East Grinstead (3 miles east) and Broadfield (6 miles west).

Landmarks near Crawley Down

Typical jobs here are in homes near Imberhorne School, Crawley Down Village CofE and All Saints Parish Church. For rail, the closest station is East Grinstead station, about 2.5 miles east. Further afield, we also cover the area around Queen Victoria Hospital (3.5 miles east) and Effingham Park Motor Museum (1.4 miles north-west). Not far away are Hedgecourt Lake.

Map of Crawley Down © OpenStreetMap contributors

Repairing versus replacing in Crawley Down

A new bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Resurfacing renews the whole surface with the bath left where it is. Prices start from £350. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.

Why Crawley Down customers choose us

  • Dust sheets down, tidy finish
  • Straight answers about what a repair can do
  • Accredited with CHAS, Constructionline and SafeContractor
  • Everything repaired in place

Read our pricing or guide to resurfacing and replacement costs.

Repairs by material

Pressed steel

Steel baths re-enamel well, once any rust has been treated. Steel often rusts by the plughole, so we pay close attention there.

Cast iron

Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.

What we’re called out for in Crawley Down

In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.

Keep an eye out for any of the following:

  • A dull, rough surface that will not come clean
  • A bath in a colour that no longer suits
  • A coating lifting around the plughole
  • Chips and rust in more than one place

Questions to ask before you book

  • What protection goes down before work starts
  • How to look after the finish
  • What prep work is covered
  • Whether the price is fixed and includes VAT

Choosing a repair company

The process

Your technician turns up at the time we agreed with you and checks the damage against your pictures first. Dust sheets and masking tape go down before any work starts. The work itself takes the best part of a day, and we leave the room as we found it.

  1. We sheet, mask and ventilate the room.
  2. We remove the old silicone and deep clean the bath.
  3. We repair chips, rust spots and pitting.
  4. We key the bath and apply a bonding primer.
  5. Several coats of finish are sprayed on, then it cures.

How to prepare

  • Keep a parking space free if you can
  • Ensure the room can be ventilated
  • Clear toiletries, mats and anything else from around the area

Getting a price

Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote.

Send pictures for a quote

Advice

FAQs for Crawley Down

Is there a smell?

Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.

Can you redo someone else’s repair?

Generally, yes. Tell us what was done before.

What happens once I’ve sent photos?

We check the damage, the material and your postcode, then reply with a quote with dates.

How do I book?

Just photos, your postcode and a contact number. On the day, we only need access to the room.

Is it worth repairing rather than replacing?

Generally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.

Is my repair covered?

Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.

Can you repair several things at once?

Of course, and it typically saves money. Send pictures of everything together and we’ll quote them together.

What happens if you find more damage?

We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.

Work for landlords and builders

Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

Looking after it afterwards

A little care keeps the finish looking good. Our advice:

  • Repair dripping taps early
  • Leave the bath for the full curing time before using it
  • Dry the bath after use to stop limescale
  • Keep toiletries on a shelf rather than in the bath

Stick to mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.

Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.