Greater London · England
Bath Re-enamelling for Crook Log homes
Full bath re-enamelling and resurfacing in Crook Log, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A roll-top that’s seen better days
- A bath that stays dull however much you clean it
Bath re-enamelling in Crook Log, done in place
Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the whole bath is tired rather than one spot. Our repair technicians work on pressed steel baths, basins & shower trays and acrylic baths, and people most often call us about brown or grey marks that don’t clean off and wear marks under the taps.
Big or small, it’s backed by a one-year guarantee in Crook Log and across Greater London.
- Location
- Crook Log (DA7, DA6, DA16)
- Region
- Greater London
- Warranty
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
What happens on the day
Here’s how a visit usually runs: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and tidy away. Plan for a full day from start to finish. Before we go, we’ll explain when it can be used and what to avoid for the first few days.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Clear toiletries, mats and anything else from around the area
- Let us know if it has been repaired before
- Keep children and pets away from the room on the day
Ask for a price
Most customers in Crook Log get their price from pictures. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Related advice
Nearby places to Crook Log
What else we do in Crook Log
Crook Log questions
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
Can you quote from pictures?
Yes, almost always. Clear pictures let us give you a fixed quote without visiting.
How long does re-enamelling last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
How long will the bath be out of use?
Generally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
How to look after the repair
So the finish stays in good condition for years:
- Keep toiletries on a shelf rather than in the bath
- Fix dripping taps quickly
- Clean with a soft cloth and mild detergent
- Respect the curing time we give you
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Repair dripping taps promptly.
On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.
What affects the price in Crook Log
Prices start from £350. Prices are worked out job by job. The main factors are:
- Previous DIY repairs that have to come out
- Access to the area
- What kind of damage it is
- How much damage there is
Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Getting a price from photos
Good pictures mean an accurate price. Here’s what helps:
- The postcode, so we can plan the visit
- Something in shot to show the size
- Natural light rather than flash
- A wider photo showing the entire bath
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. You will get a fixed price, not an estimate.
What we’re called out for in Crook Log
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
Common reasons people in Crook Log contact us include:
- A roll-top that is seen better days
- Enamel that is lost its shine and feels rough
- Thin, worn enamel in places
- A coloured bath you want in white
Before booking anyone
- How changes to the job are handled
- How the colour is matched
- What preparation is included
- A fixed price, and whether VAT is included
Crook Log and the surrounding area
Crook Log is about 3 miles south-east of Plumstead, in Greater London. We agree a date that works for you, and you will know when to expect us, so you’re not left waiting in all day. We work in 764 places in Greater London. We work right across the region, from Crook Log to London (10 miles away).
All of DA7, DA6 and DA16 is within our area. From Bean Road, Lion Road and Alers Road or a nearby road, we can come to you. Other places close to Crook Log include Upton (1 mile east), Bexleyheath (1 mile east), Welling (1 mile west), Blendon (1 mile south) and Bexley (1 mile south). We also work in nearby towns such as London (10 miles west), City of Westminster (13 miles west), Marylebone (12 miles west), Kensington (14 miles west), St Pancras (11 miles north-west) and Shoreditch (10 miles north-west).
Around Crook Log
We visit homes around Trinity Baptist Church, Danson Park and Bexleyheath Academy. You’ll also find Crook Log Primary School (less than half a mile south-east), St Columba's Catholic Boys' School (1.4 miles south-east) and The Crook Log Public House (less than half a mile south-east). There’s a railway station in Crook Log itself: Bexleyheath station. Well-known places in the area include Bexley Hospital (less than half a mile south-east) and Bexley Museum (1.7 miles south-east). The countryside around Crook Log includes Summer Hill and Wansunt Pit.
- Local facilities include Colyers (2.2 miles east)
Should you replace it?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Prices start from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why book with us
- Colours mixed by hand to suit your surface
- Honest advice, even when it means no job
- A year’s guarantee on all work
- One price list for the whole UK
See our prices page or guide to resurfacing and replacement costs.
What a repair cannot fix
A few problems are outside what a surface repair can do:
- A cast iron or steel bath that is cracked right through
- Steel that has corroded right through
- Anything hidden under an old coating, until we remove it
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
About our accreditations · Every repair comes with a one-year guarantee.
