Greater London · England
Bath Re-enamelling in Bexley
Bath re-enamelling in and around Bexley: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A coloured bath you want in white
- Thin, worn enamel in places
What bath re-enamelling costs
Prices start from £350. A fixed quote means you know the cost before booking. We take into account:
- The material and finish
- Where the damage is and how we get to it
- Any earlier repairs that need removing first
- The colour and finish to match
We don’t add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Send photos for a quote
We price nearly every job from photos. This is what to send:
- A wider photo showing the whole bath
- Daylight if possible, and no flash reflection
- Whether it’s been repaired or coated before
- The postcode, so we can plan the visit
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Bath re-enamelling at your home in Bexley
We don’t move the bath, so your taps, tiles and plumbing are left alone. It generally takes one visit, with the bath ready to use the following day. Whether it’s an old resurfacing that’s failing and a roll-top that’s seen better days, we can usually put it right.
We stand behind the work with a one-year guarantee, so you’re covered after the visit.
- Where
- Bexley (DA5, DA6, DA14, DA1)
- County
- Greater London
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
How to look after the repair
Looking after the surface is easy:
- Keep suction mats out of the bath
- Leave the bath for the full curing time before using it
- A quick wipe after use keeps limescale away
- Fix dripping taps quickly
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Nearby places to Bexley
What else we do in Bexley
Bexley and the surrounding area
Bexley is about 3 miles east of Eltham, in Greater London. We travel to homes and businesses in Bexley, so you don’t need to take anything anywhere. Our repair technicians cover 764 places across Greater London, from the larger towns to small villages. Our jobs stretch from Bexley to London (about 11 miles away).
Jobs in DA5, DA6, DA14 and DA1 are booked in the same way as anywhere else. You will find streets such as Bexley High Street, Camden Road and The North Glade, and we cover them all. Bexley is on the A2018 and B2210, so it’s easy for us to reach. Nearby, we also work in Blendon (1 mile north-west), North Cray (1 mile south), Bexleyheath (1 mile north), Upton (1 mile north) and Coldblow (1 mile east). Within a short drive, we also cover London (11 miles west), City of Westminster (13 miles west), Marylebone (13 miles north-west), Kensington (15 miles west), St Pancras (12 miles north-west) and Shoreditch (11 miles north-west).
Local landmarks in Bexley
In Bexley, that means homes near The Railway Tavern, Danson Park and Townley Grammar School, among other places. Other local landmarks include Old Bexley Church of England School (less than half a mile south-east), St Columba's Catholic Boys' School (1.1 miles north-east) and Parish Church of St John the Evangelist (under half a mile east). The nearest railway station is Bexley station, about 0.6 miles east of the centre. Other landmarks nearby include Colyers (2.5 miles north-east) and Bexley Hospital (1 mile north). The countryside around Bexley includes Summer Hill and Wansunt Pit.
When we would advise against a repair
Some jobs are not right for a repair, including:
- Damage hidden under a previous coating, until it’s stripped back
- Steel that has corroded right through
- Leaking taps or wastes (a plumber’s job)
Not sure? Send pictures and we’ll give you a straight answer.
Surfaces we repair
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
The process
Arrival times are agreed in advance, so you know when to expect us. Once we are there, the work takes a full day in most cases. The room is left tidy.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Let us know which floor the room is on
- Ensure the area is dry
- Mention any parking restrictions or tricky access
Get a quote
Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you will get a fixed price back. Quotes are free and no obligation.
Related advice
Can I fix it myself?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Bexley questions
Can you re-enamel a roll-top bath?
Yes. Inside and out.
Do you work in Bexley?
Yes. We work across the UK and come to Bexley and the rest of Greater London. Send pictures and we will quote, or call 0345 017 0787.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
What does bath re-enamelling cost?
Prices start from £350. Every job gets a fixed quote from your pictures. Send a close-up and a photo of the whole item with your DA5 postcode.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.
What do you need from me?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
Does the bath have to be removed?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Repairing versus replacing in Bexley
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you are refitting the whole room anyway. Otherwise, resurfacing typically wins. Resurfacing from £350, with every job priced individually. We charge the same wherever you are, so there is no premium for Bexley. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why us?
- Most jobs done in one visit
- Work done at your home or business
- A year’s guarantee on all work
- Everything repaired in place
Take a look at our full price list and bath cost comparison.
Do you need bath re-enamelling in Bexley?
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
Most people get in touch when they notice something like this:
- Lots of chips and rust spots
- Thin, worn enamel in places
- An old resurfacing that’s failing
- A dull, rough surface that will not come clean
Questions to ask before booking
- What prep work is covered
- How long it needs to cure
- How long the guarantee is and what it covers
- What aftercare is recommended
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
About our accreditations · Every repair comes with a one-year guarantee.
