Greater London · England

Bath Re-enamelling for Crooked Billet homes

Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Crooked Billet. Send pictures for a free, fixed quote.

  • Resurfacing from £350
  • A dull, rough surface that will not come clean
  • A coating lifting around the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Crooked Billet

When we’d advise against a repair

A repair is not always the answer, and we’ll tell you before we start. We can’t fix:

  • Leaks from fittings rather than the bath
  • A poorly supported acrylic bath, until it’s firmed up
  • A bath split right through the body

Not sure? Send photos and we will give you a straight answer.

What we work on

  • Victorian roll-tops
  • Cast iron baths
  • Acrylic baths
  • Pressed steel baths
  • Basins & shower trays

About our bath re-enamelling in Crooked Billet

The bath stays where it is, so your taps, tiles and plumbing are left alone. It normally takes one visit, with the bath ready to use the following day. If you are dealing with a peeling or bubbling previous coating and staining under the taps and around the waste, we can help.

Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.

Location
Crooked Billet (SW19, SW20)
County
Greater London
Warranty
12 months on all our work
Quote
From £350. Free, fixed quote from pictures
Telephone
0345 017 0787
Page updated
23 October 2026
Before and after: an old basin refinished to bright white

Repair or replace in Crooked Billet?

There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. We charge the same wherever you are, so there is no premium for Crooked Billet. What changes the price is the job itself: the material, the amount of damage and how many items.

What you get with us

  • We come to you, anywhere in the UK
  • One-year guarantee on every repair
  • Straight answers about what a repair can do
  • Rooms protected and left tidy

Take a look at our full price list or guide to resurfacing and replacement costs.

Crooked Billet questions

Can tenants book a repair?

Of course. Check with your landlord; we can send the quote to them too.

Do I need to be at home?

Yes. The technician needs access to the room for the visit, at a time that suits you.

Can you fix a peeling bath coating?

Yes. Removing the old finish takes extra time, which we include in the price.

Can I add another job to the visit?

Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.

Can you re-enamel a roll-top bath?

Yes, often. The inside is resurfaced, and we can refinish the outside as well.

When can you do it?

We’ll give you dates with your quote. Tell us if you need it done quickly.

Is a repair better than a new one?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.

Which areas do you work in?

We work UK-wide, so Crooked Billet is covered. Our prices are the same everywhere.

Should I try a DIY kit first?

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

If you’re set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it fails, we can still put it right.

Repairs by material

Acrylic

We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.

Covering Crooked Billet

Crooked Billet is about 1 mile west of Wimbledon, in Greater London. We travel to clients in Crooked Billet and the surrounding area, so you don’t need to take anything anywhere. Crooked Billet is one of 764 towns and villages in Greater London where we work. Our nearest city page is London, about 8 miles away.

Our visits in SW19 and SW20 are booked in the same way as anywhere else. That includes homes on Camp Road, Mckay Road and Pepys Road. We also travel to Copse Hill (1 mile south-west), Wimbledon (1 mile east), Bushey Mead (1 mile south), Wimbledon Chase (1 mile south-east) and Kingston Vale (1 mile north-west). Larger places within reach include London (8 miles north-east), City of Westminster (7 miles north-east), Marylebone (8 miles north-east), Kensington (6 miles north), St Pancras (9 miles north-east) and Shoreditch (10 miles north-east).

Near you in Crooked Billet

Around Crooked Billet, we work in homes near Hollymount School, Christ Church and The Fox and Grapes pub. Also close by are Ursuline Preparatory School (less than half a mile south-east), Wimbledon College (within half a mile south-east) and Cannizaro Park (within half a mile north-west). For rail, the closest station is Raynes Park station, roughly 0.9 miles south. Other landmarks nearby include Wimbledon Museum (0.5 miles east) and Coombe (1.6 miles west). The countryside around Crooked Billet includes Kew Gardens Lake and Henman Hill.

Map of Crooked Billet © OpenStreetMap contributors

What happens on the day

On the day itself, there’s little for you to do. Let us in and show us the room, and we will take it from there. Most visits take the best part of a day, including clearing up.

  1. First we protect the bathroom and set up ventilation.
  2. Next we degrease the bath and fix chips and rust spots.
  3. We key the surface and put on a bonding primer.
  4. We spray several coats of new enamel finish.
  5. We leave it to cure, and it’s generally ready the following day.

Preparing for the visit

  • Plan for the room to be out of bounds to pets and children
  • Mention any earlier repairs or resurfacing
  • Make sure the room can be ventilated

How to get a price

Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job without visiting.

Get a fixed quote

Advice

Do you need bath re-enamelling in Crooked Billet?

The gloss on enamel is thin, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.

If you can see any of these, send us a photo:

  • An old resurfacing that is failing
  • A roll-top that is seen better days
  • An outdated colour you’d like to change
  • Chips and rust in more than one place

What to look for in a quote

  • What prep work is covered
  • Whether there are any call-out or travel charges
  • A fixed quote, and whether VAT is included
  • What aftercare is recommended

Our hiring checklist

How we price bath re-enamelling

Resurfacing from £350. We don’t charge extra for travel to Crooked Billet. The price comes down to:

  • Previous DIY repairs that have to come out
  • How many areas need work
  • The material
  • Whether we combine several jobs

What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.

Quotes from your photos

When you take your pictures, these tips help us give you a firm price:

  • A clear, close picture of the problem area
  • Good light, ideally daylight, without flash glare
  • Whether it’s been repaired or coated before
  • Where you are, by postcode

The quickest way to a price is to send a couple of photos through our quote form or call us. We’ll tell you honestly if a repair is the right fix.

Keeping it looking good

A little care keeps the finish looking good. We recommend:

  • A dripping tap should be fixed promptly
  • Don’t use the bath until it has fully cured
  • Clean with a soft cloth and mild detergent
  • Get any chip repaired quickly

Wipe the bath dry after use where you can, particularly with hard water, and rinse away any product left on the surface.

Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.