Gateshead · England
Bath re-enamelling & resurfacing in Crookgate Bank, Gateshead
Bath re-enamelling for Crookgate Bank, without a refit. Send us pictures for a fixed price, then we come to you.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- Lots of chips and rust spots
About Crookgate Bank
Crookgate Bank is about 2 miles north-west of Stanley, in Gateshead. Customers in Crookgate Bank get the same service as everywhere else we cover: a fixed price from your pictures, then a visit to do the work. Crookgate Bank is one of 49 places in Gateshead where we work. You can also see our page for Newcastle upon Tyne, about 7 miles away.
Our visits in NE16 are booked in the same way as anywhere else. Whether you live on Lapwing Court, Field Fare Court and Plover Drive or a nearby road, we can come to you. Close by, we cover Byermoor (1 mile north), Burnopfield (1 mile north-west), Lintz (1 mile west), High Friarside (1 mile west) and Rowlands Gill (2 miles north-west). Within a short drive, we also cover Gateshead (6 miles north-east), Blaydon (4 miles north), Dunston (5 miles north-east), Whickham (3 miles north-east), Ryton (5 miles north) and Winlaton (4 miles north).
Around Crookgate Bank
Typical jobs here are in homes near North Durham Academy, Sacred Heart Catholic Primary School and The Pack Horse pub, among other places. For rail, the closest station is Metrocentre station, about 4.5 miles north-east of the centre. Nearby you’ll also find Derwentside (2.9 miles south-west) and Dunston Hill Hospital (3.9 miles north-east).
How we handle bath re-enamelling in Crookgate Bank
We re-enamel plenty of period and roll-top baths, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. We work on pressed steel baths, cast iron baths and basins & shower trays, and the jobs we see most are a dull, rough surface that won’t come clean and wear marks under the taps.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Location
- Crookgate Bank (NE16)
- County
- Gateshead
- Warranty
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What affects the price in Crookgate Bank
Resurfacing from £350. A fixed quote means you know the cost before booking. We take into account:
- Access to the area
- The size and number of damaged areas
- How many items we do on one visit
- The material
Compared with replacing, a repair is usually a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Getting a price from photos
Before you send pictures, these tips help us give you a firm price:
- Daylight if possible, and no flash reflection
- A wider photo showing the whole bath
- Your postcode, so we can check dates
- A coin or ruler next to the damage for scale
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. You will get a fixed quote, not an estimate.
Places near Crookgate Bank
What else we do in Crookgate Bank
What your bath is made of matters
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
FAQs for Crookgate Bank
When can you do it?
It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.
How do I get a price for bath re-enamelling in Crookgate Bank?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before booking.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
Can you price it without visiting?
Yes, almost always. Clear photos let us give you a fixed quote without visiting.
Can you fix a peeling bath coating?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
How long is the bath unusable?
Normally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
How it works
You do not need to empty the room. Everything we use comes in the van with us, lay protective sheets and get going once we’ve agreed what we’re doing. It generally takes most of the day, and you are welcome to carry on with your day while we work.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Let us know if it has been repaired before
- Let us know which floor the room is on
- Have a window or extractor fan available
How to get a price
You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Read more
What we are called out for in Crookgate Bank
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. That’s the point where re-enamelling makes sense.
The things customers typically mention when they call include:
- A bath in a colour that no longer suits
- A dull, rough surface that won’t come clean
- A roll-top that is seen better days
- Stains that won’t shift
Before booking anyone
- How the room is protected while they work
- Whether the price covers travel
- Whether a trained technician does the job
- Whether they match the colour on site
What a repair can’t fix
We would rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- A bath that is rusted through
- Problems we can’t see until an old finish comes off
- Leaking taps or wastes (a plumber’s job)
Send us photos and we will tell you honestly.
What we work on
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Acrylic baths
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
Repairing versus replacing in Crookgate Bank
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you are refitting the whole room anyway. Otherwise, resurfacing generally wins. Prices start from £350. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Why Crookgate Bank clients choose us
- A year’s guarantee on all work
- Fixed prices from your photos
- No extra charge for your area
- Honest advice, even when it means no job
See our full price list and bath cost comparison.
Aftercare tips
Looking after the surface is easy:
- Fix dripping taps quickly
- Have chips seen to early
- Wash away dyes and oils after use
- A quick wipe after use keeps limescale away
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Repair dripping taps promptly.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
About our accreditations · Every repair comes with a one-year guarantee.
