Worcestershire · England
Bath Re-enamelling in Cropthorne
Full bath re-enamelling and resurfacing at your home in Cropthorne, with a one-year guarantee on every repair.
- Resurfacing from £350
- An outdated colour you’d like to change
- Staining under the taps and around the waste
Repair or replace: which is better?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Prices start from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
What you get with us
- One-year guarantee on every repair
- Nothing taken out or refitted
- A fixed quote before you book
- Colours mixed by hand to suit your surface
See our full price list or guide to resurfacing and replacement costs.
Bath re-enamelling in Cropthorne, done in place
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Typical jobs include a coating lifting around the plughole and brown or grey marks that don’t clean off, in pressed steel baths, cast iron baths and acrylic baths.
All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.
- Location
- Cropthorne (WR10)
- County
- Worcestershire
- Cover
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
How to care for the repair
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Get any chip repaired quickly
- Rinse off hair dye, oils and bath bombs right away
- Never use suction bath mats
- Fix dripping taps quickly
The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Where we work around Cropthorne
Cropthorne is about 3 miles west of Evesham, in Worcestershire. Wherever you are in the WR10 postcode area, we come to you. Cropthorne is one of 376 places in Worcestershire we cover. You can also see our page for Birmingham, about 26 miles away.
All of WR10 is within our area, from the main roads to the quietest streets. From Main Street, Sheppey Corner and Field Barn Lane or anywhere nearby, we can come to you. Other places close to Cropthorne include Fladbury (1 mile north-west), Lower Moor (2 miles north-west), Hill (2 miles north-west), Wick (3 miles west) and Wyre Piddle (3 miles north-west). Within a short drive, we also cover Worcester (11 miles north-west), Redditch (14 miles north), Great Malvern (14 miles west), Droitwich Spa (13 miles north-west), Evesham (3 miles east) and Pershore (3 miles west).
What’s near Cropthorne
Typical jobs here are in homes near Chequers Inn, Church of St Michael and Cropthorne-with-Charlton CofE First School. The closest station to Cropthorne is Evesham station, roughly 2.3 miles east of the centre. A little further out are Elmley Castle (3.2 miles south-west) and The Almonry (2.3 miles east). Green spaces nearby include Tiddesley Wood and Greenhill.
Landlord and trade work in Cropthorne
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
For anyone letting property in or around Cropthorne, we will quote for several properties at once. Send photos for each one and we’ll price them together.
How it works
Your technician turns up at the time we agreed with you, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. The work itself takes a full day, and the room is left clean and tidy.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- Once cured, normally by the next day, the bath is ready.
Getting ready for the visit
- Point us to the nearest place to park
- Let us know about parking or access
- Plan for the room to be out of bounds to pets and children
How to get a price
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and we’ll reply with a fixed price. Quotes are free and no obligation.
Advice
Cropthorne: your questions answered
Does re-enamelling smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
Can you fix a peeling bath coating?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
How long does re-enamelling last?
Care for it and it lasts. Gentle cleaning, no suction mats.
Is there a guarantee?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Do the materials smell?
There may be a mild smell during the work that clears as it cures.
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
Towns and villages near Cropthorne
Other services in Cropthorne
When to call us in Cropthorne
Older baths often have several problems at once: dull areas, chips, rust and staining. Resurfacing sorts them out together.
Send us a picture if you notice any of these:
- Brown or grey marks that don’t clean off
- Wear marks under the taps
- An old resurfacing that’s failing
- Several chips and rust patches
Before booking anyone
- A fixed price, and whether VAT is included
- What prep work is covered
- Whether there are any call-out or travel charges
- How long it needs to cure
When we’d advise against a repair
In fairness, some problems need a different fix:
- Plumbing leaks, which need a plumber
- Acrylic that moves when you stand in it
- Damage hidden under a previous coating, until it’s stripped back
Send us pictures and we will tell you honestly before you book.
Materials we repair
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Acrylic baths
About our accreditations · Every repair comes with a one-year guarantee.
