Kirklees · England
Bath re-enamelling & resurfacing in Crosland Moor, Kirklees
Local bath re-enamelling for Crosland Moor: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A coloured bath you want in white
- A peeling or bubbling previous coating
Crosland Moor and nearby
Crosland Moor is about 1 mile south-west of Huddersfield, in Kirklees. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in 189 places in Kirklees. Our jobs stretch from Crosland Moor to Leeds (16 miles away).
Every address in HD4, HD3 and HD1 is covered. That includes homes on Hob Lane, Tom Lane and Deep Lane. We also cover the places around Crosland Moor: Beaumont Park (1 mile south-east), Paddock (1 mile north), Milnsbridge (1 mile north-west), Longwood (1 mile north-west) and Marsh (1 mile north). Within a short drive, we also cover Dewsbury (8 miles north-east), Batley (9 miles north-east), Mirfield (6 miles north-east), Liversedge (7 miles north-east), Cleckheaton (7 miles north-east) and Heckmondwike (8 miles north-east).
Landmarks near Crosland Moor
Around Crosland Moor, we work in homes near Oak CofE Primary School, The Sands House and Moor End Academy. The nearest railway station is Lockwood station, roughly 0.6 miles east of the centre. Further afield, we also cover the area around The Bullecourt Museum (1 mile north-west) and St. Luke's Hospital (within half a mile north-east). Not far away are Castle Hill.
How we handle bath re-enamelling in Crosland Moor
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Doing them in place keeps an original feature. We work on cast iron baths, Victorian roll-tops and pressed steel baths, and the jobs we see most are staining under the taps and around the waste and a dull, rough surface that won’t come clean.
Whatever the size of the job, you get the same one-year guarantee in Crosland Moor and across Kirklees.
- Location
- Crosland Moor (HD4, HD3, HD1)
- Area hub
- Kirklees
- Guarantee
- 12 months on all our work
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What a repair cannot fix
A few problems are outside what a surface repair can do:
- Holes rusted through the metal
- A metal bath with a through crack
- Leaking taps or wastes (a plumber’s job)
Not sure? Send photos and we’ll give you a straight answer.
Materials we repair
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
What bath re-enamelling costs
Prices start from £350. Each job gets its own fixed price. This is what makes a difference:
- The colour and finish to match
- What the surface is made of
- How easy the damage is to reach
- How much damage there is
Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.
Getting a price from pictures
You can generally get a fixed price without us visiting. To make it quick:
- One sharp close-up of the damage
- Any details about the material
- Good light, ideally daylight, without flash glare
- A coin beside the damage so we can judge size
Email us a photo of the damage and a wider shot of the whole item, with your HD4 postcode, and we will reply with a fixed quote.
When to call us in Crosland Moor
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. That’s the point where re-enamelling makes sense.
If you can see any of these, send us a picture:
- A bath in a colour that no longer suits
- Enamel that is lost its shine and feels rough
- An original cast iron bath that needs restoring
- Worn patches where water runs and sits
Questions to ask before you book
- The length of the guarantee and what it covers
- How long it needs to cure
- Whether the price is fixed and includes VAT
- Whether there are any call-out or travel charges
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Places near Crosland Moor
More services for Crosland Moor
Your questions about bath re-enamelling in Crosland Moor
Can you fix a peeling bath coating?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
What does bath re-enamelling cost?
Prices start from £350. Every job gets a fixed quote from your pictures. Send a close-up and a picture of the entire item with your HD4 postcode.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Does re-enamelling smell?
There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
I rent my home. Can I book you?
We’re happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
How long does re-enamelling take?
Most baths are done in a day and can be used the day after. We’ll confirm timings when we quote.
Repair or replace: which is better?
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- Every repair guaranteed for a year
- Straight answers about what a repair can do
- We leave the room as we found it
- No need to remove anything
See our pricing and bath cost comparison.
Keeping it looking good
Most damage we see is avoidable. These habits help:
- Don’t use the bath until it has fully cured
- A dripping tap should be fixed promptly
- Get any chip repaired quickly
- Wipe the bath dry after use in hard water areas
A quick rinse and wipe after use helps, particularly where water is hard, so limescale cannot build up.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. It’s simpler to resurface before they spread.
What we do, step by step
Nothing needs to be moved out of the room beforehand. We bring everything we need with us, put protection down and get going once we have agreed what we’re doing. It usually takes the best part of a day, and you can get on with other things while we’re there.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the following day, the bath is ready.
How to prepare
- Point us to the nearest place to park
- Have a window or extractor fan available
- Mention any earlier repairs or resurfacing
Getting a price
For a price in Crosland Moor, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
