Kirklees · England
Bath Re-enamelling for Milnsbridge homes
Full bath re-enamelling and resurfacing for homes and businesses in Milnsbridge and across Kirklees. Free, fixed quotes from your pictures.
- Resurfacing from £350
- Several chips and rust patches
- An outdated colour you’d like to change
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.
Bath re-enamelling in Milnsbridge without replacing anything
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. We’re frequently asked to fix thin, worn enamel in places and a roll-top that’s seen better days, in Victorian roll-tops, acrylic baths and pressed steel baths.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Location
- Milnsbridge (HD3, HD4, HD1)
- Area hub
- Kirklees
- Cover
- A year, on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Common problems we fix in Milnsbridge
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
People generally call us when they notice something like this:
- Lots of chips and rust spots
- Brown or grey marks that do not clean off
- An original cast iron bath that needs restoring
- Thin, worn enamel in places
Questions to ask before booking
- The length of the guarantee and what it covers
- How to care for the finish
- Is the price fixed, and does it include VAT?
- How soon you can use it again
Should you replace it?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Prices start from £350. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Why book with us
- Generally one visit, start to finish
- Dust sheets down, tidy finish
- Everything repaired in place
- Accredited with CHAS, Constructionline and SafeContractor
Take a look at our prices page and guide to resurfacing and replacement costs.
What bath re-enamelling costs
Resurfacing from £350. Every quote is fixed and free. What we take into account:
- The type of damage
- The material
- Where the damage is and how we get to it
- Whether old repairs or coatings need taking off
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
Send pictures for a quote
Almost every job we do is priced from pictures. This is what we need:
- A clear, close picture of the problem area
- What it’s made of, if you know
- Any earlier repairs or coatings
- One picture of the entire bath
You don’t need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Aftercare tips
A little care keeps the finish looking good. We recommend:
- Leave the bath for the full curing time before using it
- Repair dripping taps early
- Store bottles off the bath
- Don’t let dyes or oils sit on the finish
Dry the bath after use if possible, particularly with hard water, and rinse away any product left on the surface.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
Also near Milnsbridge
More services for Milnsbridge
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Honest limits
Before you book, it’s worth knowing the limits:
- Leaks from fittings rather than the bath
- A bath split right through the body
- Holes rusted through the metal
If in doubt, send photos and we’ll say what we think.
Materials we work on in Milnsbridge
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
The process
The work is clean and fairly quiet. Protection goes down first, then the job itself takes most of the day. At the end we talk you through how soon it can be used and how to care for it.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the next day.
Getting ready for the visit
- Point us to the nearest place to park
- Mention any earlier repairs or resurfacing
- Avoid using the area for a few hours before we arrive
Ask for a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Read more
Milnsbridge and nearby
Milnsbridge is about 1 mile west of Huddersfield, in Kirklees. Whether you’re in the middle of Milnsbridge or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in 189 places across Kirklees. You can also see our page for Leeds, about 16 miles away.
Every address in HD3, HD4 and HD1 is covered, from the main roads to the quietest streets. We regularly work on streets such as Meg Lane, Scar Lane and Deep Lane and the roads around them. If you’re just outside Milnsbridge, we cover Longwood (1 mile north-west), Paddock (1 mile east), Crosland Moor (1 mile south-east), Golcar (1 mile west) and Marsh (1 mile north-east). We also work in nearby towns such as Dewsbury (9 miles north-east), Batley (9 miles north-east), Mirfield (6 miles north-east), Liversedge (7 miles north-east), Cleckheaton (7 miles north-east) and Heckmondwike (8 miles north-east).
Landmarks near Milnsbridge
Typical jobs here are in homes near Former Church of St Luke, Royds Hall Community School and The Royal pub. Milnsbridge’s nearest station is Lockwood station, about 1.1 miles south-east. Other landmarks nearby include The Bullecourt Museum (within half a mile west) and Piazza Centre (1.9 miles east). Open spaces near Milnsbridge include Castle Hill.
Common questions in Milnsbridge
I’m a tenant. Can you help?
We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside.
How do I book?
Send photos through the quote form or call 0345 017 0787, and we will do the rest.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Is there a guarantee?
Every repair comes with a one-year guarantee. We will explain what it covers when we quote.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
How long will the bath be out of use?
Normally one day, with the bath ready the next day. Deeply pitted baths may need a second day.
Will there be fumes?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
About our accreditations · Every repair comes with a one-year guarantee.
