County Durham · England
Bath re-enamelling & resurfacing in Crossgate, County Durham
Full bath re-enamelling and resurfacing in Crossgate, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Several chips and rust patches
- An old resurfacing that’s failing
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
How we handle bath re-enamelling in Crossgate
Most baths are re-enamelled in a day, and you can use the bath the day after. Nothing is disconnected or removed. Whether it’s a peeling or bubbling previous coating and several chips and rust patches, we can help.
Every job is backed for twelve months in Crossgate and everywhere else. If something goes wrong with the work, we come back.
- Location
- Crossgate (DH1, DH99)
- County
- County Durham
- Cover
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Materials and what they mean for the repair
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel often rusts by the plughole, so we pay close attention there.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
When a repair isn’t the answer
Honesty matters more than a booking, so here’s what a repair will not do:
- A poorly supported acrylic bath, until it’s firmed up
- Steel that has corroded right through
- Problems we cannot see until an old finish comes off
If in doubt, send photos and we’ll say what we think.
Materials we work on in Crossgate
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
Crossgate and nearby
Crossgate is about 1 mile south-west of Durham, in County Durham. From the centre of Crossgate to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. Our technicians cover 329 places across County Durham. Our nearest city page is Newcastle upon Tyne, about 15 miles away.
We cover every part of the DH1 and DH99 postcode area and the streets around it. Jobs here include addresses on Clay Lane, North Road and The Avenue and the roads around them. Close by, we cover Elvet (1 mile east), Neville's Cross (1 mile south-west), Durham (1 mile north-east), Lowes Barn (1 mile south-west) and Gilesgate (1 mile east). We also work in nearby towns such as Consett (12 miles north-west), Newton Aycliffe (10 miles south), Bishop Auckland (9 miles south-west), Spennymoor (5 miles south), Seaham (10 miles north-east) and Chester-le-Street (6 miles north).
Near you in Crossgate
Locally, our jobs take us to homes close to Durham Sixth Form Centre, St Margaret's Church and Chorister School, among other places. Other local landmarks include Durham University Library and Collections (0.6 miles south-east), St Margaret's Church of England Primary School (less than half a mile south-west), The Angel Public House (under half a mile north) and Old Durham Gardens (1.1 miles east). There is a railway station in Crossgate itself: Durham station. Further afield, we also cover the area around County Hospital (within half a mile north-west) and Durham Cathedral Museum (less than half a mile south-east).
- Other local spots include Durham (0.6 miles north)
What happens on the day
We agree an arrival time beforehand, so you are not left guessing. Once we’re there, the work takes the best part of a day in most cases. We leave the room clean and you will know when it can be used.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Ensure the room can be ventilated
- Mention any parking restrictions or tricky access
- Avoid using the area for a few hours before we arrive
Getting a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Advice
Towns and villages near Crossgate
What else we do in Crossgate
Common questions in Crossgate
How do I get a price for bath re-enamelling in Crossgate?
Resurfacing from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.
Can a failed resurfacing be redone?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Can you change the colour of my bath?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Can you re-enamel a roll-top bath?
Yes, often. We resurface the inside, and the outside can be refinished too.
Can you repair something that’s been repaired before?
In most cases. The old repair comes out first.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
What happens once I’ve sent pictures?
We come back with a fixed quote, plus dates. There’s no obligation to book.
How we price bath re-enamelling
Resurfacing from £350. We do not charge extra for travel to Crossgate. The price depends on:
- Whether it’s a chip, crack, burn or wear
- The material
- Whether we combine several jobs
- Previous DIY repairs that have to come out
Our prices are the same across the UK, so there is no premium for Crossgate. What changes the price is the job itself: the material, the amount of damage and how many items.
Send photos for a quote
You can take the pictures on your phone, there’s no need for anything special. Ensure they show:
- Whether it’s been repaired or coated before
- A coin beside the damage so we can judge size
- A clear, close picture of the problem area
- Your postcode, so we can check dates
To get a price, send a couple of photos through our quote form or call us. We will say immediately if a repair is the right fix.
Aftercare tips
Once the work has cured, treat it gently:
- Leave the bath for the full curing time before using it
- Get any chip repaired quickly
- A quick wipe after use keeps limescale away
- Store bottles off the bath
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Landlords, agents and businesses in Crossgate
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Landlords, letting agents and housing providers in Crossgate use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Do you need bath re-enamelling in Crossgate?
Many baths we resurface have simply been well used, and only the surface is worn. Underneath, a cast iron or steel bath is generally as strong as ever.
Clients generally contact us about:
- A peeling or bubbling previous coating
- A roll-top that is seen better days
- Brown or grey marks that don’t clean off
- Several chips and rust patches
What your quote should include
- What aftercare is recommended
- What prep work is covered
- Who turns up on the day
- Whether there are any call-out or travel charges
About our accreditations · Every repair comes with a one-year guarantee.
