Lincolnshire · England
Bath re-enamelling & resurfacing in Crossgate, Lincolnshire
Local bath re-enamelling for Crossgate: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Worn patches where water runs and sits
- Enamel that’s lost its shine and feels rough
Repairs by material
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
How we handle bath re-enamelling in Crossgate
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. Whether it’s lots of chips and rust spots and worn patches where water runs and sits, we can normally put it right, on basins & shower trays, acrylic baths and Victorian roll-tops alike.
Peace of mind is built in: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Area
- Crossgate (PE11)
- Region
- Lincolnshire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
When we would advise against a repair
Not everything can be repaired, and we would rather say so up front. We can’t fix:
- A poorly supported acrylic bath, until it’s firmed up
- Plumbing leaks, which need a plumber
- Steel that has corroded right through
Send us photos and we will tell you honestly.
What we work on
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Acrylic baths
How to care for the repair
Looking after the surface is easy, and it makes a real difference:
- Have chips seen to early
- Store bottles off the bath
- A dripping tap should be fixed promptly
- Don’t let dyes or oils sit on the finish
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Repair dripping taps promptly.
Do not try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
Covering Crossgate
Crossgate is about 3 miles north of Spalding, in Lincolnshire. We travel to homes and businesses in Crossgate and nearby villages, so nothing has to leave your home. Crossgate is one of 732 places in Lincolnshire where we work. Our jobs stretch from Crossgate to Birmingham (about 77 miles away).
We work across PE11. Jobs here include addresses on Bacon's Lane, Surfleet Road and Flaxmill Lane and the roads around them. We also travel to Pinchbeck (1 mile south), Surfleet (1 mile north-east), Wykeham (2 miles east), Surfleet Seas End (2 miles north-east) and Gosberton Cheal (2 miles north-west). Within a short drive, we also cover Boston (12 miles north-east), Spalding (3 miles south), Bourne (10 miles south-west), Holbeach (7 miles east), Austerby (10 miles south-west) and Market Deeping (12 miles south-west).
Near you in Crossgate
We visit homes around Church of St Mary and The Pinchbeck East Church of England Primary School, among other places. Crossgate’s nearest station is Spalding station, roughly 2.5 miles south. Other landmarks nearby include The Spalding Bulb Museum (within half a mile south-east).
What we are called out for in Crossgate
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
These are the problems we are asked about most:
- A peeling or bubbling previous coating
- A roll-top that is seen better days
- An outdated colour you’d like to change
- Thin, worn enamel in places
Comparing quotes
- How changes to the job are handled
- Who will actually do the work
- If travel is included in the price
- What protection goes down before work starts
Nearby places to Crossgate
What else we do in Crossgate
Landlord and trade work in Crossgate
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
We work for landlords, letting agents and housing providers in Crossgate as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Crossgate: your questions answered
Can you repair something that is been repaired before?
Generally, yes. Tell us what was done before.
Is there a smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
What happens next?
We check the damage, the material and your postcode, then reply with a quote with dates.
Do you cover Crossgate?
We do. We send a technician to Crossgate for every job, and the price is the same as everywhere else.
What if the damage is worse than the photos show?
We will show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
Can a failed resurfacing be redone?
Usually, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
How long does re-enamelling last?
Care for it and it lasts. Gentle cleaning, no suction mats.
What we do, step by step
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job usually takes a full day. We clean up when we’re done and let you know when you can use it again.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Getting ready for the visit
- Let us know if it has been repaired before
- Avoid using the area for a few hours before we arrive
- Point us to the nearest place to park
Get a quote
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Read more
Repair or replace: which is better?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, normally one day. Prices start from £350. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Why choose Surface Doctor in Crossgate
- One-year guarantee on every repair
- Accredited with CHAS, Constructionline and SafeContractor
- One price list for the whole UK
- Nothing taken out or refitted
Read our prices page or resurfacing vs replacement cost guide.
How we price bath re-enamelling
Resurfacing from £350. Every quote is fixed and free. What we look at:
- What kind of damage it is
- What the surface is made of
- The colour and finish to match
- Any earlier repairs that need removing first
We charge the same wherever you are, with no extra for Crossgate. The job itself decides the price: how much damage, what it’s made of and how many items.
Quotes from your photos
It only takes a minute to photograph the damage. Please include:
- A clear, close picture of the problem area
- A wider photo showing the entire bath
- What it’s made of, if you know
- Your postcode, so we can check dates
The quickest way to a price is to send a couple of pictures through our quote form or call us. We will say immediately whether it can be repaired.
About our accreditations · Every repair comes with a one-year guarantee.
