Staffordshire · England
Bath re-enamelling & resurfacing in Croxton, Staffordshire
Full bath re-enamelling and resurfacing for homes and businesses in Croxton and across Staffordshire. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A coating lifting around the plughole
- A bath in a colour that no longer suits
Signs you need bath re-enamelling in Croxton
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
It’s worth getting a quote if you see:
- Stains that will not shift
- Worn patches where water runs and sits
- A dull, rough surface that won’t come clean
- Several chips and rust patches
Comparing quotes
- The length of the guarantee and what it covers
- How the room is protected while they work
- Who turns up on the day
- How changes to the job are handled
Bath re-enamelling in Croxton, done in place
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Typical jobs include stains that won’t shift and chips and rust in more than one place, in basins & shower trays, Victorian roll-tops and cast iron baths.
All our work is covered by our one-year guarantee, wherever you are in Staffordshire.
- Where
- Croxton (ST21)
- Area hub
- Staffordshire
- Cover
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Croxton questions
Can you resurface a pink bath in white?
Yes, most people go for white. Mention the colour you want when you send pictures.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we’re working in. We’ll tell you when the room can be used again.
Do you cover Croxton?
Yes. We cover the whole UK and travel to Croxton. Send photos and we will quote, or call 0345 017 0787.
Is there any odour?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
Is a repair better than a new one?
Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
How long does re-enamelling take?
Typically a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
What does bath re-enamelling cost?
Resurfacing from £350. We give a fixed quote from your pictures. Send a close-up and a picture of the entire item and your postcode.
Can you quote from pictures?
Nearly always. We only ask to see it in person if the pictures cannot show what we need.
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Repairing versus replacing in Croxton
Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Re-enamelling gives the bath a new finish with the bath left where it is. Prices start from £350. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
What you get with us
- Colour mixed on the day to match
- Normally one visit, start to finish
- Nothing taken out or refitted
- Rooms protected and left tidy
Read our prices page or resurfacing vs replacement cost guide.
The process
Here’s how a visit normally runs: we arrive on time, sheet and mask the area around the job, do the job and clear up. Allow most of the day from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the day after, the bath is ready.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Clear toiletries, mats and anything else from around the area
- Mention any earlier repairs or resurfacing
Ask for a price
To get a price, send two or three pictures using our quote form or ring us. We will tell you honestly whether it can be repaired.
Advice
Croxton and nearby
Croxton is about 7 miles east of Market Drayton, in Staffordshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Croxton is one of 512 places in Staffordshire we cover. You can also see our page for Birmingham, about 34 miles away.
We cover every part of the ST21 postcode area. We regularly work on streets such as Church Lane, Shut Lane and Windmill Lane. You’ll find Croxton on the B5026, which makes it straightforward to reach. Close by, we cover Wetwood (1 mile north-west), Fairoak (1 mile west), Armsdale (1 mile south-west), Outlands (2 miles south-west) and Offleyhay (2 miles south). Larger places within reach include Stafford (10 miles south-east), Newcastle-under-Lyme (10 miles north), Longton (10 miles north-east), Stone (7 miles east), Alsager (14 miles north) and Kidsgrove (14 miles north).
What’s near Croxton
We visit homes around Church of St Paul, among other places. Other landmarks nearby include Eccleshall Castle (3.3 miles south-east). Open spaces near Croxton include Jackon's Coppice and Marsh and Cop Mere.
Keeping it looking good
It’s all simple stuff:
- Use washing-up liquid and a soft cloth
- Respect the curing time we give you
- Keep suction mats out of the bath
- Have chips seen to early
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
What your bath is made of matters
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Work for landlords and builders
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we’ll handle the rest.
Other services in Croxton
Prices and what affects them
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- Where the damage is and how we get to it
- Whether old repairs or coatings need taking off
- The size and number of damaged areas
- What the surface is made of
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
How to get a fixed price
Two or three clear pictures are typically enough. It helps if you send:
- One picture of the whole bath
- Any earlier repairs or coatings
- A coin or ruler next to the damage for scale
- The material, if you know it
If you’re in Croxton and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
About our accreditations · Every repair comes with a one-year guarantee.
