Kent · England
Bath re-enamelling & resurfacing in Goodnestone, Kent
Bath re-enamelling across Goodnestone and nearby, generally in one visit.
- Resurfacing from £350
- Stains that will not shift
- Chips and rust in more than one place
When we’d advise against a repair
We’d rather lose a job than do one that won’t last, so these are the limits:
- Plumbing leaks, which need a plumber
- A cast iron or steel bath that is cracked right through
- Holes rusted through the metal
If in doubt, send pictures and we will say what we think.
Materials we repair
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
Bath re-enamelling at your home in Goodnestone
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. If you are dealing with several chips and rust patches and an original cast iron bath that needs restoring, we can help, whatever the material.
All of our repairs are guaranteed for twelve months in Goodnestone and everywhere else. If something goes wrong with the work, we come back.
- Where
- Goodnestone (ME13)
- Region
- Kent
- Cover
- One year on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
About Goodnestone
Goodnestone is about 2 miles east of Preston, in Kent. Clients in Goodnestone get the same service as everywhere else we cover: a fixed price from your photos, then a visit to do the work. Goodnestone is one of 922 towns and villages in Kent we cover. Our nearest city page is London, about 46 miles away.
We cover every part of the ME13 postcode area. Streets in the area include Head Hill Road and Cherrywood, all of which we cover. Other places close to Goodnestone include Culmers (1 mile north-east), Graveney (1 mile north-east), Broom Street (1 mile north), Staplestreet (1 mile south-east) and Slutshole (1 mile south-east). We also work in nearby towns such as Ashford (12 miles south), Canterbury (7 miles east), Sittingbourne (9 miles west), Whitstable (5 miles north-east), Herne Bay (9 miles north-east) and Minster (9 miles north-west).
Around Goodnestone
Locally, our jobs take us to homes close to Mount Ephraim Gardens, Graveney Primary School and St Bartholomew's Church, among other places. The nearest railway station is Faversham station, roughly 1.9 miles west. Well-known places in the area include Whitstable and Tankerton Hospital (5.8 miles north-east). Not far away are Blean Woods RSPB Reserve.
Keeping it looking good
Simple care helps the repair last. We recommend:
- Clean with a soft cloth and mild detergent
- Do not let dyes or oils sit on the finish
- Keep suction mats out of the bath
- A quick wipe after use keeps limescale away
Dry the bath after use if possible, and rinse away any product left on the surface.
Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.
Repairing versus replacing in Goodnestone
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Prices start from £350. Our prices are the same across the UK, so there’s no premium for Goodnestone. The job itself decides the price: the material, the amount of damage and how many items.
Why choose Surface Doctor in Goodnestone
- No extra charge for your area
- CHAS and Constructionline accredited
- Colour-matched on site
- Dust sheets down, tidy finish
Take a look at our prices page and resurfacing vs replacement cost guide.
The process
We turn up at the time we agreed with you, introduces themselves and checks the damage against your pictures first. Dust sheets and masking tape go down before any work starts. Most visits take a full day, and the room is left clean and tidy.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- The bath is left to cure and can generally be used the day after.
Getting ready for the visit
- Plan for the room to be out of bounds to pets and children
- Point us to the nearest place to park
- Let the surface dry out before the visit
Getting a price
Send us pictures of the damage and one of the whole item, and tell us you are in Goodnestone, and we’ll reply with a fixed price.
Advice
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot.
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Landlords, agents and businesses in Goodnestone
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
Goodnestone questions
Is there a smell?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
Do you need to take the bath out?
No. We resurface it in place, so nothing else is disturbed.
Are there extra charges for Goodnestone?
Travel is included in the price, with the same prices everywhere we work.
How do I book?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Can you re-enamel a roll-top bath?
Yes. Inside and out if you’d like.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.
Also near Goodnestone
Also in Goodnestone
When to call us in Goodnestone
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Clients usually contact us about:
- Wear marks under the taps
- Staining under the taps and around the waste
- A coloured bath you want in white
- An original cast iron bath that needs restoring
Questions to ask before you book
- The length of the guarantee and what it covers
- What prep work is covered
- What happens if the damage is worse than the pictures show
- What aftercare is recommended
About our accreditations · Every repair comes with a one-year guarantee.
