Cardiff · Wales
Bath Re-enamelling for Culverhouse Cross homes
Bath re-enamelling across Culverhouse Cross and nearby, typically in one visit.
- Resurfacing from £350
- An outdated colour you’d like to change
- Staining under the taps and around the waste
Do you need bath re-enamelling in Culverhouse Cross?
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.
Signs it’s time to call us include:
- Enamel that’s lost its shine and feels rough
- A bath in a colour that no longer suits
- Stains that won’t shift
- A roll-top that is seen better days
Questions to ask before you book
- How the room is protected while they work
- Who will actually do the work
- How long it needs to cure
- How to look after the finish
About our bath re-enamelling in Culverhouse Cross
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Common call-outs are for stains that won’t shift and a roll-top that’s seen better days, in cast iron baths, basins & shower trays and pressed steel baths.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Location
- Culverhouse Cross (CF5)
- Region
- Cardiff
- Warranty
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
How the visit works
Your technician turns up at the time we agreed with you, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes most of the day, and the room is left clean and tidy.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Let us know which floor the room is on
- Let us know about parking or access
How to get a price
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.
Related advice
Repairing versus replacing in Culverhouse Cross
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. Our prices are the same across the UK, with no extra for Culverhouse Cross. The job itself decides the price: how much damage, what it’s made of and how many items.
What you get with us
- No extra charge for your area
- A fixed quote before booking
- A year’s guarantee on all work
- One visit for most repairs
See our pricing and resurfacing vs replacement cost guide.
How we price bath re-enamelling
Resurfacing from £350. You won’t pay by the hour. The price is based on:
- The colour and finish to match
- Access to the area
- Whether we combine several jobs
- What kind of damage it is
We do not add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from pictures
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- Natural light rather than flash
- Details of any past repairs
- Something in shot to show the size
- Where you are, by postcode
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
About Culverhouse Cross
Culverhouse Cross is about 1 mile south-west of Ely, in Cardiff. Clients in Culverhouse Cross get the same service as everywhere else we cover: a fixed price from your photos, then a visit to do the work. We cover 91 places in Cardiff, from the larger towns to small villages.
We cover every part of the CF5 postcode area. From Port Road, Park Avenue and Harlech Road or a nearby road, we can come to you. Culverhouse Cross is on the A4050, so it’s easy for us to reach. We also cover the places around Culverhouse Cross: Twyn-yr-odyn (1 mile south), Michaelston-super-Ely (1 mile north), Downs (1 mile west), Caerau (1 mile north-east) and Wenvoe (1 mile south). Further out, we also cover Cardiff (4 miles north-east), Castle (4 miles east), Adamsdown (5 miles east), Roath (5 miles east), Splott (5 miles east) and Newtown (4 miles east).
Around Culverhouse Cross
Around Culverhouse Cross, we work in homes near Mary Immaculate High School, St Fagans C.I.W. Primary School and Coopers Carvery pub. For rail, the closest station is Waun-Gron Park station, about 2.3 miles north-east. Further afield, we also cover the area around Welsh Museum of Health and Medicine (3.6 miles north) and Castle Arcade (4 miles east). Green spaces nearby include Glamorgan Canal / Long Wood and Wenvoe Hill.
Common questions in Culverhouse Cross
Is there a call-out fee?
We do not add a call-out fee. Your fixed quote includes everything.
Can you fix a peeling bath coating?
Usually, yes. We strip the failing coating and resurface it properly. Mention it when you send pictures.
Is there any odour?
There can be some smell while we work, which is why we ventilate. It fades as everything cures.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.
It’s been repaired before. Can you still fix it?
Yes, we often do. It can add a little time, which we include in the quote.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit generally costs less than separate visits. Send pictures of everything you’d like done.
Is the work guaranteed?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Will the price change on the day?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
Landlords, agents and businesses in Culverhouse Cross
Landlords, letting agents and housing providers in Culverhouse Cross use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
DIY repairs versus a professional job
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
What we can’t put right
Honesty matters more than a booking, so here’s what a repair cannot fix:
- Problems we cannot see until an old finish comes off
- Steel that has corroded right through
- A metal bath with a through crack
Not sure? Send photos and we’ll give you a straight answer.
Materials we repair
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
Materials and what they mean for the repair
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Nearby places to Culverhouse Cross
Also in Culverhouse Cross
About our accreditations · Every repair comes with a one-year guarantee.
