Buckinghamshire · England
Bath re-enamelling & resurfacing in Denham, Buckinghamshire
Local bath re-enamelling for Denham: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Thin, worn enamel in places
- A bath in a colour that no longer suits

How we handle bath re-enamelling in Denham
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Doing them in place keeps an original feature. We are often asked to fix chips and rust in more than one place and an outdated colour you’d like to change, on cast iron baths, Victorian roll-tops and basins & shower trays.
All our work is covered by a one-year guarantee.

- Where
- Denham (UB9)
- Area hub
- Buckinghamshire
- Cover
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
The process
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which usually takes a full day. If anything looks different from your photos, we will talk to you before going ahead.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s generally ready the following day.
Getting ready for the visit
- Have a window or extractor fan available
- Tell us about any previous repairs or coatings
- Tell us if there are stairs or a lift
How to get a price
To get a price, send a couple of pictures through our quote form or ring us. We’ll say immediately if a repair is the right fix.
Read more
Honest limits
It helps to know what we can’t do:
- A poorly supported acrylic bath, until it’s firmed up
- Damage hidden under a previous coating, until it’s stripped back
- Leaks from fittings rather than the bath
If in doubt, send photos and we’ll say what we think.
Materials we work on in Denham
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
Our work in Denham
Denham is about 3 miles north-west of Hillingdon, in Buckinghamshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Denham is one of 263 places in Buckinghamshire where we work. Our jobs stretch from Denham to London (about 18 miles away).
We work across UB9 and the streets around it. You’ll find streets such as Denham Way, Baconsmead and Ash Mead Drive, and we cover them all. Neighbouring places we cover include New Denham (1 mile south-east), South Harefield (2 miles north), Newyears Green (2 miles north-east), Uxbridge (2 miles south-east) and Ickenham (2 miles east). Within a short drive, we also cover High Wycombe (12 miles west), Chesham (11 miles north-west), Marlow (12 miles west), Amersham (9 miles north-west), Beaconsfield (7 miles north-west) and Chalfont St Peter (4 miles north-west).
Near you in Denham
Locally, our jobs take us to homes close to Vyners School, Denham Village School and Church of St Mary, among other places. The nearest railway station is Denham station, roughly 0.7 miles north. Other landmarks nearby include Hillingdon Museum and Archives Services (1.8 miles south-east) and Harefield Hospital (2.8 miles north). Green spaces nearby include Kingcup Meadows and Oldhouse Wood and Horse Shoe Bay.
Work for landlords and builders
We work for landlords, letting agents and housing providers in Denham as well as homeowners. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
For anyone letting property in or around Denham, we can repair and quote for several addresses together. Just send pictures for each address and we will price them together.
What affects the price in Denham
Prices start from £350. We give every job a fixed price from photos. This is what makes a difference:
- How many items we do on one visit
- The material
- Whether old repairs or coatings need taking off
- The size and number of damaged areas
Compared with replacing, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Quotes from your photos
You can take the pictures on your phone. Just make sure we can see:
- A clear, close picture of the problem area
- Daylight if possible, and no flash reflection
- Something in shot to show the size
- The postcode, so we can plan the visit
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
What else we do in Denham
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
When to call us in Denham
Enamel wears gradually. Years of cleaning, hard water and hot baths dull the surface, starting where water runs and sits.
Common reasons people in Denham contact us include:
- A dull, rough surface that will not come clean
- Several chips and rust patches
- A period or roll-top bath worth keeping
- A coloured bath you want in white
Before you book anyone
- What prep work is covered
- Whether a trained technician does the job
- How the room is protected while they work
- How to care for the finish
Denham questions
Can you redo someone else’s repair?
Generally, yes. Let us know what was used before.
Can you do the outside of a roll-top?
Yes. Inside and out if you’d like.
Can a failed resurfacing be redone?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Can you make a coloured bath white?
Yes, white is the usual choice. Mention the colour you want when you send pictures.
What if the damage is worse than the pictures show?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
What areas do you cover?
The entire UK, including all of Buckinghamshire. Send your postcode with your pictures and we’ll offer you dates.
Can I add another job to the visit?
Of course, and it generally saves money. Just add the extra items to your pictures and we’ll quote them together.
Why repair rather than replace?
Replacing a bath generally involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
Why us?
- Honest advice, even when it means no job
- Rooms protected and left tidy
- One visit for most repairs
- CHAS and Constructionline accredited
Take a look at our prices page and guide to resurfacing and replacement costs.
Aftercare tips
To keep it looking its best for years:
- A quick wipe after use keeps limescale away
- Do not use the bath until it has fully cured
- Avoid suction-cup mats
- Fix dripping taps quickly
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Do not try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
About our accreditations · Every repair comes with a one-year guarantee.

