Kent · England
Bath Re-enamelling in Denstroude
Problem with your bath in Denstroude? We put it right where it is, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- A bath that stays dull however much you clean it
Bath re-enamelling in Denstroude without replacing anything
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. We work on acrylic baths, Victorian roll-tops and pressed steel baths, and people most often call us about an outdated colour you’d like to change and thin, worn enamel in places.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Area
- Denstroude (CT2)
- County
- Kent
- Warranty
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
How the visit works
You don’t need to empty the room. We bring everything we need with us, put protection down and get going once we’ve agreed what we’re doing. Most jobs take most of the day, and you can get on with other things while we are there.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Mention any parking restrictions or tricky access
- Keep pets and children out of the room while we work
- Clear the area around the damage
Get a quote
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Advice
What your bath is made of matters
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Landlords, agents and businesses in Denstroude
If you manage property in Denstroude, we can repair and quote for several addresses together. Just send photos for each address and we’ll come back with a combined price.
We work for landlords, letting agents and housing providers in Denstroude as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
About Denstroude
Denstroude is about 3 miles south of Whitstable, in Kent. Across the CT2 area, a technician comes to you. Denstroude is one of 922 places in Kent we cover. We work right across the region, from Denstroude to London (about 50 miles away).
Every address in CT2 is covered, from the main roads to the quietest streets. Neighbouring places we cover include Honey Hill (1 mile east), Yorkletts (1 mile north-west), Blean (1 mile south-east), Tyler Hill (2 miles east) and Hackington (2 miles east). Larger places within reach include Ashford (14 miles south-west), Canterbury (4 miles south-east), Sittingbourne (12 miles west), Whitstable (3 miles north), Faversham (6 miles west) and Herne Bay (6 miles north-east).
Landmarks near Denstroude
Around Denstroude, we work in homes near Foxes Cross Bottom and the streets around them. For rail, the closest station is Whitstable station, roughly 3 miles north. Nearby you’ll also find Tankerton Castle (3.4 miles north) and Whitstable and Tankerton Hospital (3.4 miles north-east). Green spaces nearby include Blean Woods RSPB Reserve.
Also near Denstroude
What else we do in Denstroude
DIY repairs versus a professional job
If you’re set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Should you replace it?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
What you get with us
- We come to you, anywhere in the UK
- One price list for the entire UK
- Typically one visit, start to finish
- Everything repaired in place
See our pricing or resurfacing vs replacement cost guide.
What bath re-enamelling costs
Prices start from £350. We charge the same across the UK, including Denstroude. The price reflects:
- The size and number of damaged areas
- How many items we do on one visit
- Whether it’s a chip, crack, burn or wear
- Previous DIY repairs that have to come out
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
How to get a fixed quote
Phone photos are fine. Make sure they show:
- A coin beside the damage so we can judge size
- Daylight if possible, and no flash reflection
- A wider photo showing the entire bath
- A clear, close picture of the problem area
Upload photos of the damage and a wider shot of the whole item, with your CT2 postcode, and we’ll reply with a fixed price.
Denstroude: your questions answered
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
What information do you need?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Will there be fumes?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
Do you cover the whole of Kent?
We work UK-wide, so Denstroude is covered. Our prices are the same everywhere.
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
What if the damage is worse than the photos show?
The price is fixed for what the pictures show. If there is more, we’ll tell you before starting.
Can you price it without visiting?
Typically, yes. A close-up and a wider photo are enough to give a fixed price.
Signs you need bath re-enamelling in Denstroude
A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Customers usually contact us about:
- Thin, worn enamel in places
- A bath that stays dull however much you clean it
- A coating lifting around the plughole
- A period or roll-top bath worth keeping
What your quote should include
- Whether a trained technician does the job
- How to look after the finish
- Whether the price covers travel
- How your room will be protected
How to care for the repair
Nothing complicated is needed, just a few sensible habits:
- Don’t use the bath until it has fully cured
- Wash away dyes and oils after use
- Fix dripping taps quickly
- Use washing-up liquid and a soft cloth
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
About our accreditations · Every repair comes with a one-year guarantee.
