Kent · England
Bath Re-enamelling for Honey Hill homes
Bath re-enamelling across Honey Hill and nearby, normally in one visit and guaranteed for a year.
- Resurfacing from £350
- A roll-top that is seen better days
- Worn patches where water runs and sits
Repair or replace: which is better?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. The price reflects the work involved, not your postcode. The full price is agreed before you book, with nothing added on the day.
Why book with us
- Most jobs done in one visit
- Colour mixed on the day to match
- One price list for the entire UK
- Everything repaired in place
See our full price list and guide to resurfacing and replacement costs.
Bath re-enamelling in Honey Hill without replacing anything
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. We regularly repair cast iron baths, acrylic baths and basins & shower trays, and people most frequently call us about thin, worn enamel in places and a coloured bath you want in white.
You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.
- Area
- Honey Hill (CT2)
- Area hub
- Kent
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What we do, step by step
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the job takes a full day, and we finish with a tidy-up and a look at the finished work together.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s generally ready the day after.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Ensure the area is dry
- Point us to the nearest place to park
Getting a price
Send us pictures of the damage and a wider shot of the whole item, and tell us you are in Honey Hill, and we’ll reply with a fixed price.
Advice
Signs you need bath re-enamelling in Honey Hill
A dull surface stains and holds dirt, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.
Typical reasons for a call-out include:
- An outdated colour you’d like to change
- A period or roll-top bath worth keeping
- An old resurfacing that is failing
- Lots of chips and rust spots
What to look for in a quote
- What preparation is included
- Who will actually do the work
- The length of the guarantee and what it covers
- What aftercare is recommended
How we price bath re-enamelling
Resurfacing from £350. We give every job a fixed price from pictures. These are the things that affect it:
- How hard the colour is to match
- The size and number of damaged areas
- How many items we do on one visit
- The material
We charge the same wherever you are, with no extra for Honey Hill. The job itself decides the price: how much damage, what it’s made of and how many items.
Getting a price from photos
You can take the pictures on your phone. Just ensure we can see:
- A wider photo showing the whole bath
- What it’s made of, if you know
- A clear, close picture of the problem area
- The postcode, so we can plan the visit
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote the same day in most cases.
What your bath is made of matters
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we pay close attention there.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
Honey Hill and nearby
Honey Hill is about 3 miles south of Whitstable, in Kent. Whether you are in the middle of Honey Hill or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. We cover 922 places in Kent. Our jobs stretch from Honey Hill to London (about 50 miles away).
Jobs in CT2 work the same way as everywhere else we cover. We also cover the places around Honey Hill: Denstroude (1 mile west), Blean (1 mile south-east), Tyler Hill (2 miles east), Yorkletts (2 miles north-west) and Hackington (2 miles south-east). Within a short drive, we also cover Ashford (14 miles south-west), Canterbury (3 miles south-east), Sittingbourne (13 miles west), Whitstable (3 miles north), Faversham (6 miles west) and Herne Bay (6 miles north-east).
Near you in Honey Hill
Around Honey Hill, we work in homes near Church of St Cosmus and St Damian, Tyler Hill Meadow and The Archbishop's School and the streets around them. Honey Hill’s nearest station is Canterbury West station, about 2.8 miles south-east. Well-known places in the area include Eastbridge Hospital of St Thomas the Martyr (3.1 miles south-east) and Whitefriars Shopping Centre (3.3 miles south-east). Not far away are Blean Woods RSPB Reserve.
Towns and villages near Honey Hill
Also in Honey Hill
Common questions in Honey Hill
Is there a smell?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
How long does re-enamelling take?
One day for most baths and can be used the day after. We’ll confirm timings when we quote.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
What happens next?
You get a fixed price and available dates. If we need another angle, we’ll ask.
Can landlords book you?
Yes, frequently. We can quote for several properties together and work between tenancies.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
How quickly can you book me in?
Your quote comes with available dates. Tell us if you need it done quickly.
Landlord and trade work in Honey Hill
Landlords, letting agents and housing providers in Honey Hill use us as well as homeowners. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Looking after it afterwards
To keep it looking its best:
- Avoid suction-cup mats
- Repair dripping taps early
- Don’t let dyes or oils sit on the finish
- Keep toiletries on a shelf rather than in the bath
Use mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
Can I fix it myself?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
About our accreditations · Every repair comes with a one-year guarantee.
