Kent · England
Bath Re-enamelling in Yorkletts
Bath re-enamelling for Yorkletts, without a refit. Get a fixed price from your pictures, then we come to you.
- Resurfacing from £350
- Lots of chips and rust spots
- A dull, rough surface that will not come clean
About Yorkletts
Yorkletts is about 2 miles south-west of Whitstable, in Kent. We visit customers in Yorkletts and the surrounding area, so there is no workshop to go to. Yorkletts is one of 922 places in Kent we cover. We work right across the region, from Yorkletts to London (about 49 miles away).
Every address in CT5 is covered, from the main roads to the quietest streets. Streets in the area include Ford Walk, Glen Walk and Coombe Walk, and we cover them all. We also travel to Denstroude (1 mile south-east), Honey Hill (2 miles south-east), Whitstable (2 miles north-east), Blean (2 miles south-east) and Radfall (3 miles east). We also work in nearby towns such as Ashford (14 miles south-west), Canterbury (5 miles south-east), Sittingbourne (12 miles west), Faversham (5 miles west), Herne Bay (6 miles north-east) and Minster (11 miles north-west).
Landmarks near Yorkletts
In Yorkletts, that means homes near St Alphege, The Whitstable School and Foxes Cross Bottom. For rail, the closest station is Whitstable station, roughly 2.6 miles north-east of the centre. Other landmarks nearby include Tankerton Castle (2.9 miles north-east) and Whitstable and Tankerton Hospital (3.2 miles north-east). Not far away are Blean Woods RSPB Reserve.
Bath re-enamelling at your home in Yorkletts
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. We regularly repair acrylic baths, Victorian roll-tops and cast iron baths, and the jobs we see most are a bath in a colour that no longer suits and lots of chips and rust spots.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Area
- Yorkletts (CT5)
- Region
- Kent
- Cover
- 12 months on all our work
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Towns and villages near Yorkletts
More services for Yorkletts
What your bath is made of matters
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we check it carefully.
Why repair rather than replace?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why book with us
- No need to remove anything
- Repair technicians who travel to you, UK-wide
- CHAS, Constructionline and SafeContractor accredited
- Most jobs done in one visit
Read our full price list or bath cost comparison.
Can I fix it myself?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.
What affects the price in Yorkletts
Prices start from £350. Every quote is fixed and free. What we look at:
- The size and number of damaged areas
- Whether it’s a chip, crack, burn or wear
- Previous DIY repairs that have to come out
- Where the damage is and how we get to it
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Getting a price from photos
Almost every job we do is priced from pictures. This is what to send:
- Details of any past repairs
- Something in shot to show the size
- Your postcode, so we can check dates
- One picture of the whole bath
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
What we’re called out for in Yorkletts
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
People normally call us when they notice something like this:
- A bath in a colour that no longer suits
- Stains that will not shift
- A peeling or bubbling previous coating
- Thin, worn enamel in places
What your quote should include
- Whether the colour is mixed to match
- A fixed quote, and whether VAT is included
- The length of the guarantee and what it covers
- How the room is protected while they work
Landlord and trade work in Yorkletts
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Questions from Yorkletts
What happens after I send pictures?
You’ll get a fixed quote back, normally with dates to choose from. You’re under no obligation.
Will there be fumes?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
Do you cover the whole of Kent?
We work UK-wide, so Yorkletts is covered. Our prices are the same everywhere.
Will the new finish last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Can you redo someone else’s repair?
Yes, we often do. It can add a little time, which we include in the quote.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
When a repair isn’t the answer
We would rather lose a job than do one that won’t last, so here’s what a repair cannot put right:
- A metal bath with a through crack
- Steel that has corroded right through
- Leaking taps or wastes (a plumber’s job)
Not sure? Send pictures and we’ll give you a straight answer.
Materials we work on in Yorkletts
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
How it works
On the day itself, there is little for you to do. Let us in and show us the room, and we’ll take it from there. The job generally runs to most of the day, tidy-up included.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Keep children and pets away from the room on the day
- Let the surface dry out before the visit
- Tell us if there are stairs or a lift
How to get a price
We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
