Kent · England
Bath re-enamelling & resurfacing in Denton, Kent
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Denton. Free, fixed quotes from your pictures.
- Resurfacing from £350
- Several chips and rust patches
- Brown or grey marks that don’t clean off
How we handle bath re-enamelling in Denton
Most baths are re-enamelled in a day, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. Typical jobs include an old resurfacing that’s failing and an original cast iron bath that needs restoring, in Victorian roll-tops, basins & shower trays and acrylic baths.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Denton (DA12)
- Area hub
- Kent
- Cover
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What we do, step by step
We agree an arrival time beforehand, so you’re not left guessing. On site, it takes a full day. We leave the room clean and you will know when it can be used.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the day after.
Preparing for the visit
- Keep pets and children out of the room while we work
- Tell us if there are stairs or a lift
- Have a window or extractor fan available
Ask for a price
If you are in Denton and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Advice
How to care for the repair
So the finish stays in good condition for years:
- Have chips seen to early
- Respect the curing time we give you
- A quick wipe after use keeps limescale away
- Wash away dyes and oils after use
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
For landlords and businesses
For developers and builders, we fix damage before handover. We can visit several plots in one trip to keep costs down.
Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Signs you need bath re-enamelling in Denton
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
Clients typically contact us about:
- An old resurfacing that’s failing
- A period or roll-top bath worth keeping
- Worn patches where water runs and sits
- Staining under the taps and around the waste
Comparing quotes
- If travel is included in the price
- How to look after the finish
- How long it needs to cure
- What happens if the damage is worse than the photos show
FAQs for Denton
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
I rent my home. Can I book you?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Can I get a quote without a visit?
Nearly always. If pictures do not show enough, we will ask for another angle.
Are there extra charges for Denton?
There’s no separate call-out charge. Your fixed quote includes everything.
It’s been repaired before. Can you still fix it?
Yes, we often do. Removing the old work can add time, and that’s in the quote.
Which areas do you work in?
We cover the whole UK, including Denton and the rest of Kent. Just include your postcode and we’ll offer you dates.
How long will the bath be out of use?
Typically one day, with the bath ready the day after. Deeply pitted baths may need a second day.
Is there any odour?
There may be a mild smell during the work.
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we check it carefully.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Nearby places to Denton
What else we do in Denton
Our work in Denton
Denton is about 1 mile east of Gravesend, in Kent. From the centre of Denton to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. We cover all 922 towns and villages in Kent. You can also see our page for London, about 22 miles away.
Our technicians cover all of the DA12 postcode area and the streets around it. Streets in the area include Barr Road, Mark Lane and Forge Lane. Being close to the A226, Denton is simple for us to get to. Neighbouring places we cover include Milton-next-Gravesend (1 mile north-west), Gravesend (1 mile west), Windmill Hill (1 mile west), Singlewell or Ifield (2 miles south-west) and Northfleet (2 miles west). Within a short drive, we also cover Maidstone (13 miles south-east), Dartford (7 miles west), Sevenoaks (14 miles south-west), Swanley (10 miles west), Kings Hill (11 miles south) and Foley Park (12 miles south-east).
Landmarks near Denton
Around Denton, we work in homes near St John's Catholic Comprehensive, St John's Catholic Primary School and St John's Catholic Comprehensive. Also close by are Northfleet Urban Country Park (1.9 miles north-west), The Ship & Lobster pub (0.6 miles north) and Church of St Peter and St Paul (0.5 miles north-west). For rail, the closest station is Gravesend station, roughly 1.2 miles north-west of the centre. A little further out are Gravesham Museum (1.2 miles north-west) and Gravesham Community Hospital (1.4 miles north-west). Green spaces nearby include Sawyers Lake and Gad's Hill.
Repair or replace in Denton?
A refit takes several trades and several days. Re-enamelling takes one technician and typically one day, and the bath can be used the day after. Our bath re-enamelling starts from £350. There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- We will tell you if it’s not worth repairing
- Generally one visit, start to finish
- Everything repaired in place
- Accredited with CHAS, Constructionline and SafeContractor
Read our pricing and guide to resurfacing and replacement costs.
DIY kit or professional repair?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- Problems we cannot see until an old finish comes off
- A bath that’s rusted through
- A metal bath with a through crack
If in doubt, send pictures and we will say what we think.
What we work on
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
About our accreditations · Every repair comes with a one-year guarantee.
