Kent · England

Bath re-enamelling & resurfacing in Singlewell or Ifield, Kent

Our technicians come to Singlewell or Ifield for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.

  • Resurfacing from £350
  • A coloured bath you want in white
  • A bath that stays dull however much you clean it
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Singlewell or Ifield homes

How we price bath re-enamelling

Prices start from £350. A fixed quote means you know the cost before you book. We look at:

  • Access to the area
  • How much damage there is
  • Previous DIY repairs that have to come out
  • Whether it’s a chip, crack, burn or wear

Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.

Send photos for a quote

Photographing the damage takes a minute. Please include:

  • Any details about the material
  • Details of any past repairs
  • Your postcode, so we can check dates
  • One picture of the whole bath

Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you’ll get a fixed price back. There’s no charge for the quote and you’re under no obligation.

Bath re-enamelling in Singlewell or Ifield without replacing anything

We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, so we do not cut corners on it. Common call-outs are for worn patches where water runs and sits and an outdated colour you’d like to change, on acrylic baths, basins & shower trays and cast iron baths.

Whatever the size of the job, you get the same one-year guarantee in Singlewell or Ifield and across Kent.

Surface Doctor technician refinishing the outside of a roll-top bath
Where
Singlewell or Ifield (DA12, DA11, DA13)
Region
Kent
Cover
12 months on all our work
Price
From £350. Free, fixed price from pictures
Telephone
0345 017 0787
Updated
23 October 2026

How the visit works

From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes a full day, and we finish by cleaning up and talking you through the result.

  1. We sheet, mask and ventilate the room.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. Chips, rust and pitting are repaired.
  4. We key the bath and apply a bonding primer.
  5. The new finish is sprayed on in several coats and left to cure until the day after.

Before we arrive

  • Avoid using the area for a few hours before we arrive
  • Tell us about parking, stairs or access
  • Mention any earlier repairs or resurfacing

Getting a price

Most customers in Singlewell or Ifield get their price from pictures. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.

Get a free quote

Read more

When a repair isn’t the answer

A repair isn’t right for every job, for example:

  • A bath that is rusted through
  • Anything hidden under an old coating, until we remove it
  • A metal bath with a through crack

Not sure? Send photos and we will give you a straight answer.

Materials we work on in Singlewell or Ifield

  • Pressed steel baths
  • Victorian roll-tops
  • Cast iron baths
  • Acrylic baths
  • Basins & shower trays

Repair or replace in Singlewell or Ifield?

For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Resurfacing from £350, with every job priced individually. The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed quote from your pictures, so you know the cost before you book.

Why choose Surface Doctor in Singlewell or Ifield

  • One visit for most repairs
  • Nothing taken out or refitted
  • A fixed quote before booking
  • Work done at your home or business

Read our full price list and resurfacing vs replacement cost guide.

Can I fix it myself?

For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

Do you need bath re-enamelling in Singlewell or Ifield?

Older baths frequently have several problems at once: dull areas, chips, rust and staining. Resurfacing sorts them out together.

Get in touch if you’ve noticed:

  • A bath in a colour that no longer suits
  • Staining under the taps and around the waste
  • Chips and rust in more than one place
  • A bath that stays dull however much you clean it

Comparing quotes

  • Whether the price covers travel
  • Aftercare advice
  • How long it needs to cure
  • Whether the price is fixed and includes VAT

Our hiring checklist

Materials and what they mean for the repair

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.

Roll-top and period baths

Freestanding roll-tops can be done inside and out, with the outside refinished as well.

Singlewell or Ifield and the surrounding area

Singlewell or Ifield is about 1 mile south of Gravesend, in Kent. From the centre of Singlewell or Ifield to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. Our technicians cover 922 places across Kent. Our jobs stretch from Singlewell or Ifield to London (about 21 miles away).

Jobs in DA12, DA11 and DA13 work the same way as everywhere else we cover. That includes homes on North Lane, Scott Road and Sandown Road. If you are just outside Singlewell or Ifield, we cover Henhurst (1 mile south-east), Istead Rise (1 mile south-west), Gravesend (1 mile north), Windmill Hill (2 miles north) and Northfleet Green (2 miles west). Within a short drive, we also cover Maidstone (12 miles south-east), Dartford (7 miles west), Sevenoaks (12 miles south-west), Tonbridge (15 miles south), Swanley (9 miles west) and Kings Hill (10 miles south).

Landmarks near Singlewell or Ifield

Around Singlewell or Ifield, we work in homes near Church of St Margaret, Jeskyns and Saint George's Church of England School. Also close by are The George Inn (less than half a mile south-east), Thamesview School (1.2 miles north-east) and Singlewell Primary School (less than half a mile east). The closest station to Singlewell or Ifield is Meopham station, roughly 1.9 miles south-west of the centre. Nearby you will also find Gravesham Museum (2.1 miles north) and Stone Castle (4.7 miles north-west). Green spaces nearby include Rede Common and Gad's Hill.

Map of Singlewell or Ifield © OpenStreetMap contributors

Questions from Singlewell or Ifield

How long is the bath unusable?

One day for most baths and can be used the day after. We give you timings with the quote.

Will the price change on the day?

We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.

Is the work guaranteed?

Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.

Can you fix a peeling bath coating?

In most cases. The old coating comes off before we resurface it. Mention it when you send photos.

Will the bath be moved?

No. It’s re-enamelled where it stands, so the tiles and taps stay put.

What information do you need?

Use the quote form or ring 0345 017 0787, and we’ll take it from there.

Can I get a quote without a visit?

Yes, almost always. A close-up and a wider photo are enough to give a fixed price.

Do I need to be at home?

We need someone to let us in. You do not need to watch us work.

How to care for the repair

A little care keeps the finish looking good. We recommend:

  • Respect the curing time we give you
  • Keep suction mats out of the bath
  • Clean with a soft cloth and mild detergent
  • Have chips seen to early

Rinse the bath and wipe it over after use, especially in hard water areas, so limescale can’t build up.

Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.