Kent · England
Bath re-enamelling & resurfacing in Windmill Hill, Kent
Bath re-enamelling in and around Windmill Hill: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- An outdated colour you’d like to change
Bath re-enamelling in Windmill Hill without replacing anything
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It suits baths that are dull, stained, rough or chipped all over. We regularly repair pressed steel baths, cast iron baths and basins & shower trays, and people most often call us about a coloured bath you want in white and chips and rust in more than one place.
All our work is covered by a one-year guarantee.
- Area
- Windmill Hill (DA12, DA11)
- Region
- Kent
- Cover
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What we’re called out for in Windmill Hill
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
It’s worth getting a quote if you see:
- A coating lifting around the plughole
- A coloured bath you want in white
- Worn patches where water runs and sits
- Brown or grey marks that do not clean off
What your quote should include
- Whether they match the colour on site
- When it can be used again
- How changes to the job are handled
- Who turns up on the day
How it works
We work cleanly and quietly, so you can carry on at home. We protect the area first, then the job itself takes a full day. At the end we talk you through how soon it can be used and how to care for it.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can generally be used the day after.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Keep a parking space free if you can
- Open a window if you can
Ask for a price
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we will reply with a fixed quote. Quotes are free and you are under no obligation.
Advice
Landlord and trade work in Windmill Hill
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access and we will handle the rest.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Windmill Hill questions
Can you repair something that is been repaired before?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
How long is the bath unusable?
One day for most baths, ready the day after. We give you timings with the quote.
Can I get a quote without a visit?
Nearly always. If photos don’t show enough, we will ask for another angle.
Do you need to take the bath out?
No. We resurface it in place, so nothing else is disturbed.
Can I add another job to the visit?
Of course, and it normally saves money. Just add the extra items to your photos and we will quote them together.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Do the materials smell?
It depends on the job, but frequently a little. Open windows and an extractor fan help.
What your bath is made of matters
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Aftercare tips
To keep it looking its best:
- Store bottles off the bath
- Rinse off hair dye, oils and bath bombs straight away
- Stick to gentle, non-abrasive cleaners
- Wipe the bath dry after use in hard water areas
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.
What bath re-enamelling costs
Resurfacing from £350. We give every job a fixed quote from photos. These are the things that affect it:
- Whether old repairs or coatings need taking off
- Doing more than one item at once
- How much damage there is
- How hard the colour is to match
The price reflects the work involved, not your postcode. The full price is agreed before you book.
How to get a fixed quote
It only takes a minute to photograph the damage. Please include:
- The material, if you know it
- One sharp close-up of the damage
- Daylight if possible, and no flash reflection
- A coin or ruler next to the damage for scale
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Also near Windmill Hill
What else we do in Windmill Hill
Windmill Hill and nearby
Windmill Hill is about 1 mile north-west of Gravesend, in Kent. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in all 922 towns and villages in Kent, from the larger towns to small villages. Our jobs stretch from Windmill Hill to London (21 miles away).
We work across DA12 and DA11 and the streets around it. That includes homes on New Road, Sun Lane and Joy Road and the roads around them. With the A227 close by, Windmill Hill is simple for us to get to. If you are just outside Windmill Hill, we cover Gravesend (1 mile south-east), Milton-next-Gravesend (1 mile north-east), Denton (1 mile east), Northfleet (1 mile west) and Painters Ash (2 miles south-west). Larger places within reach include Maidstone (13 miles south-east), Dartford (6 miles west), Sevenoaks (13 miles south-west), Swanley (9 miles west), Kings Hill (11 miles south) and Foley Park (13 miles south-east).
Around Windmill Hill
Around Windmill Hill, we work in homes near Mayfield Grammar School, The Waterloo Public House and Wrotham Road Primary School, among other places. You will also find St John's Catholic Comprehensive (0.6 miles east), Northfleet Urban Country Park (1.1 miles north-west) and Christ Church Milton (within half a mile south-east). For rail, the closest station is Gravesend station, about 0.5 miles north-west. Further afield, we also cover the area around Gravesham Museum (0.5 miles north) and Stone Castle (4.1 miles west). Open spaces near Windmill Hill include Sawyers Lake and Gad's Hill.
What a repair can’t fix
A repair isn’t always the answer, and we would rather say so up front. We cannot fix:
- A metal bath with a through crack
- A poorly supported acrylic bath, until it’s firmed up
- Holes rusted through the metal
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
About our accreditations · Every repair comes with a one-year guarantee.
