Argyll and Bute · Scotland

Bath re-enamelling & resurfacing in Drumlemble, Argyll and Bute

Damaged bath in Drumlemble? We repair it in place, mix the colour on the day and back it with a one-year guarantee.

  • Resurfacing from £350
  • An original cast iron bath that needs restoring
  • Thin, worn enamel in places
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Drumlemble homes

Bath re-enamelling in Drumlemble without replacing anything

After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. Whether it’s a coating lifting around the plughole and an original cast iron bath that needs restoring, we can typically put it right, whatever the material.

We stand behind the work with a one-year guarantee, so you’re not left on your own once we have gone.

Location
Drumlemble (PA28)
County
Argyll and Bute
Cover
12 months on all our work
Quote
From £350. Fixed and free, based on pictures
Call
0345 017 0787
Last updated
23 October 2026
Before and after: an old basin refinished to bright white

Landlords, agents and businesses in Drumlemble

If you manage property in Drumlemble, we can repair and quote for several addresses together. Send pictures for each one and we’ll price them together.

Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

Aftercare tips

A little care keeps the finish looking good. We recommend:

  • Leave the bath for the full curing time before using it
  • Don’t leave bottles, razors or sponges standing on the surface
  • Have chips seen to early
  • Keep suction mats out of the bath

The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.

On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.

Signs you need bath re-enamelling in Drumlemble

Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.

The things customers usually mention when they call include:

  • A bath that stays dull however much you clean it
  • Lots of chips and rust spots
  • An old resurfacing that’s failing
  • Thin, worn enamel in places

What to look for in a quote

  • How your room will be protected
  • Who turns up on the day
  • How long it needs to cure
  • The length of the guarantee and what it covers

How to compare quotes

Questions from Drumlemble

It’s been repaired before. Can you still fix it?

Normally, yes. The old repair comes out first.

Does re-enamelling smell?

Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.

Will the new finish last?

A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.

When can you do it?

Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.

Do you charge for travel?

We do not add a call-out fee. Your fixed quote includes everything.

Does someone need to be in?

Someone needs to let us in and show us the job. You don’t need to watch us work.

What happens once I’ve sent photos?

We look at the photos and reply with a fixed price and some dates. If we need another angle, we will ask.

I rent my home. Can I book you?

Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.

What we do, step by step

The work is clean and fairly quiet. Protection goes down first, then the work takes the best part of a day. Before we leave, we explain the curing time and the aftercare.

  1. We check the bath and agree the finish with you.
  2. Everything around the bath is masked and covered.
  3. The bath is degreased, repaired and keyed.
  4. We apply the primer and then the finish coats.
  5. The masking comes off, we tidy up and tell you when it can be used.

How to prepare

  • Make sure the area is dry
  • Let us know which floor the room is on
  • Have a window or extractor fan available

Getting a price

We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.

Get a fixed quote

Advice

Why repair rather than replace?

Replacing the bath means a plumber, lifting out the old bath, making good the walls and tiles and days without a bathroom. Re-enamelling gives the bath a new finish without moving it. Our bath re-enamelling starts from £350. Set against the cost of replacement, repairing typically costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.

Why choose Surface Doctor in Drumlemble

  • CHAS and Constructionline accredited
  • Colours mixed by hand to suit your surface
  • Honest advice, even when it means no job
  • Dust sheets down, tidy finish

Read our full price list or resurfacing vs replacement cost guide.

Repairs by material

Roll-top and period baths

Freestanding roll-tops can be done inside and out, with the outside refinished as well.

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.

When we would advise against a repair

We will not take on work that will not last, so these are the limits:

  • A bath split right through the body
  • A bath that’s rusted through
  • Leaking taps or wastes (a plumber’s job)

Send us photos and we’ll tell you honestly.

What we work on

  • Acrylic baths
  • Cast iron baths
  • Basins & shower trays
  • Victorian roll-tops
  • Pressed steel baths

Can I fix it myself?

DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.

About Drumlemble

Drumlemble is about 27 miles north-east of Ballycastle, in Argyll and Bute. Book a date that suits you, and you’ll know when to expect us, so you are not left waiting in all day. We work in 118 places across Argyll and Bute, from the larger towns to small villages. You can also see our page for Glasgow, about 63 miles away.

Postcode districts we cover here: PA28. Jobs here include addresses on Burnbank Cottages and Rhudal Cottages and the roads around them. Drumlemble sits on or near the B843, so getting to you is simple. Close by, we cover West Darlochan (3 miles north), Campbeltown (4 miles east), Askomill (4 miles east), Kilkerran (4 miles east) and Southend (7 miles south). For island and remote addresses, call first so we can plan the visit.

Landmarks near Drumlemble

In Drumlemble, that means homes near Kilkivan. Other landmarks nearby include Kilchrist Castle (2.1 miles south-east) and Campbeltown Heritage Centre (3.5 miles east). For a walk, there is Beinn Ghuilean and Killypole Loch.

Map of Drumlemble © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.