Falkirk · Scotland

Bath Re-enamelling in Dunmore

Full bath re-enamelling and resurfacing in Dunmore, carried out at your home and guaranteed for a year.

  • Resurfacing from £350
  • An outdated colour you’d like to change
  • An old resurfacing that is failing
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Dunmore?

Bath re-enamelling at your home in Dunmore

We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. If you’re dealing with wear marks under the taps and a bath that stays dull however much you clean it, we can help, whatever the material.

Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before booking.

Surface Doctor technician refinishing the outside of a roll-top bath
Area
Dunmore (FK2)
County
Falkirk
Warranty
One year on every repair
Quotes
From £350. Fixed and free, based on pictures
Telephone
0345 017 0787
Last updated
23 October 2026

Repair or replace: which is better?

Replacing the bath means a plumber, lifting out the old bath, re-tiling or making good the walls and several days without a working bathroom. Re-enamelling gives the bath a new finish without moving it. Our bath re-enamelling starts from £350. Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.

Why choose Surface Doctor in Dunmore

  • Most jobs done in one visit
  • Every repair guaranteed for a year
  • CHAS and Constructionline accredited
  • A fixed quote before booking

See our full price list and bath cost comparison.

Aftercare tips

Much of the damage we repair could have been avoided. A few tips:

  • Do not use the bath until it has fully cured
  • Wash away dyes and oils after use
  • Stick to gentle, non-abrasive cleaners
  • A quick wipe after use keeps limescale away

Use mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.

The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.

Covering Dunmore

Dunmore is about 3 miles south of Alloa, in Falkirk. From the centre of Dunmore to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. We cover 50 places in Falkirk. Our nearest city page is Edinburgh, about 24 miles away.

All of FK2 is within our area. We also cover the places around Dunmore: Airth (1 mile south-east), Kincardine (3 miles south-east), Carronshore (4 miles south), Skinflats (4 miles south) and Carron (4 miles south). Within a short drive, we also cover Falkirk (6 miles south), Grangemouth (6 miles south-east), Bo'ness (8 miles south-east), Larbert (4 miles south-west), Stenhousemuir (4 miles south) and Denny (7 miles south-west).

What’s near Dunmore

Around Dunmore, we work in homes near Airth Parish Church and Churchyard and Alloa Academy. The nearest railway station is Alloa station, about 2.3 miles north. Nearby you will also find Stirling District Lunatic Asylum (3.7 miles south-west) and Alloa Museum And Gallery (2.3 miles north). Open spaces near Dunmore include Black Devon Wetlands RSPB Reserve.

Map of Dunmore © OpenStreetMap contributors

How it works

It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which typically takes the best part of a day. If anything looks different from your photos, we’ll talk to you before going ahead.

  1. First we look the bath over and confirm the finish.
  2. Taps, tiles and the floor are masked off.
  3. We degrease the bath, fix any damage and key the surface.
  4. Primer and finish coats are applied.
  5. We remove the masking, tidy up and give you the curing time.

Getting ready for the visit

  • Mention any parking restrictions or tricky access
  • Point us to the nearest place to park
  • Open a window if you can

How to get a price

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote the same day in most cases.

Get a free quote

Advice

DIY kit or professional repair?

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

How we price bath re-enamelling

Prices start from £350. There’s no charge for travel to Dunmore. The price comes down to:

  • How much damage there is
  • How easy the damage is to reach
  • How many items we do on one visit
  • Unusual colours or finishes

There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Getting a price from pictures

Photographing the damage takes a minute. Please include:

  • A close-up of the damage, in focus
  • Something in shot to show the size
  • Details of any past repairs
  • Your postcode, so we can check dates

A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.

What your bath is made of matters

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.

Acrylic

Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.

FAQs for Dunmore

Are there extra charges for Dunmore?

Travel is included in the price, with the same prices everywhere we work.

Can you do the outside of a roll-top?

Yes. Inside and out if you’d like.

How long does re-enamelling last?

Look after it and it lasts. Avoid abrasive cleaners and suction mats.

What happens next?

We come back with a fixed price, usually with dates to choose from. You’re under no obligation.

Do you cover Dunmore?

Yes. We work across the UK and travel to Dunmore. Send photos and we’ll quote, or call 0345 017 0787.

What happens if you find more damage?

Your quote covers the damage in the photos. If there’s more, we’ll tell you before starting.

What areas do you cover?

The whole UK, including all of Falkirk. Just include your postcode and we’ll confirm dates.

Can you do more than one item on the same visit?

Yes. Combining jobs on one visit brings the cost down. Include photos of each item.

When a repair isn’t the answer

It helps to know what we cannot do:

  • Anything hidden under an old coating, until we remove it
  • A poorly supported acrylic bath, until it’s firmed up
  • Holes rusted through the metal

Not sure? Send pictures and we’ll give you a straight answer.

What we work on

  • Pressed steel baths
  • Cast iron baths
  • Acrylic baths
  • Basins & shower trays
  • Victorian roll-tops

Landlords, agents and businesses in Dunmore

Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.

For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.